Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Mounting, Bracket (F-100)

Awarded

SPRTA126Q0154Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPRTA1-25-Q-0154 is a firm-fixed price procurement issued by DLA Aviation at Oklahoma City for the acquisition of Mounting Brackets (F-100), NSN 5340-01-344-9238NZ, Part Number 4078345. The requirement is for a base quantity of 18 units, with a minimum of 5 and a maximum of 27. These components are designated as Critical Safety Items, requiring strict adherence to qualification standards and source approval. Delivery is requested in increments of 5 units starting on or before April 1, 2026, with the place of delivery at the DLA Distribution Depot in Tinker AFB, Oklahoma, under F.O.B. Origin terms. The procurement process is compliance-driven, functioning as a technical qualification gate where approval is binary based on the submission of a comprehensive Source Approval Request package. Key requirements include ISO 9001, AS9100, or NATO AQAP-2070 quality certifications, and NADCAP certification for significant industrial processes such as heat treating and chemical processing. Contractors must provide detailed Process Operation Sheets, Inspection Method Sheets, and evidence of legal rights to master tooling or proprietary data. Packaging and marking must strictly comply with MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, including specific heat treatment requirements for wood packaging materials per ISPM No. 15.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

Contract Value

$255,107.16

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Awardee

RTX CORPORATION

Award Issued Date

03/10/2026, 12:00:00 AM UTC

Documents

2

Letter Solicitation SPRTA1-25-Q-0154 for Mounting Bracket

35 pages · rfq

High

SPRTA126Q0154 - Mounting Bracket (F-100)

presolicitation

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedOct 10

Presolicitation

Type ChangedOct 29

Presolicitation → Solicitation

AwardedMar 10

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

David Todd Isaac

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Contract was based on firm-fixed price.

Similar Contracts

Same NAICS industry code

TURBO SUPERCHARGER, ENG

Solicitation # SPE7L3-27-U-0017

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

CONNECTOR ASSEMBLY

Solicitation # SPE4A5-27-T-1065

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

MTU Engine Spare Parts and Component SupplyThis subcontract focuses on the supply of specialized replacement parts, gaskets, seals, and internal engine components for prime contractors working on Naval Surface Warfare Center, Philadelphia Division projects. The scope includes the manufacture or distribution of OEM-spec components specifically for MTU 8000, 4000, 2000, 1163, 595, and 396 series engines. All deliverables must be produced using marine-grade materials and strictly adhere to ISO 9001 and NAVSEA quality standards. Managed under the Department of Defense for the NSWC Philadelphia Division, the contract involves the delivery of physical engine components and spare parts kits to be performed in Philadelphia. The solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026, falling under NAICS code 336412.

Nswc Philadelphia Division

POSTED

about 7 hours ago

DEADLINE

Filter Element, Flui

Solicitation # SPRTA1-26-Q-0468

Solicitation SPRTA1-26-Q-0468 is a request for quotation issued by DLA Weapons Support at Oklahoma City for the procurement of Filter Elements, NSN 2945-01-303-4245NZ, with manufacturer part numbers AE9348-1658 or 4075732. These components are designated as Critical Safety Items (CSI) and require compliance with AS9100 quality standards and Item Unique Identification (IUID) marking per MIL-STD-130. The current requirement is for 10 units, though the government requests pricing for ranges between 3 and 15 units. This is not a small business set-aside, and the response deadline has been extended to October 30, 2026, at 2:00 p.m. CST. Award will be determined using the Best Value Process, Performance Price Tradeoff method. Technical acceptability is a prerequisite, after which cost and past performance will be evaluated with approximately equal importance. Deliveries are to be shipped to code A SW3211, with inspection and acceptance occurring at the origin. The contractor must utilize the Wide Area Workflow (WAWF) system for invoicing and receiving reports. Packaging must adhere to strict wood packaging material standards, including heat treatment and certification per SPMNO 15, and products containing ozone-depleting substances must be labeled accordingly.

Ok DLA Aviation At Oklahoma City

POSTED

about 7 hours ago

DEADLINE

Output Assembly Fabrication and AssemblyThis subcontract involves the manufacture and assembly of two Output Assemblies, identified by NSN 2915015972028, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The scope of work requires the fabrication of components according to part number 993015PIMA and final assembly in strict adherence to RA001 technical requirements. Performance will take place in Tracy, California. To qualify, the contractor must hold either SAE AS9003 or ISO 9001 certification and ensure full compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The project is categorized under NAICS code 336412. Interested parties must respond by October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Machining of Air Force Critical Safety Item (Shoulder Bolts)This subcontract involves the precision machining and turning of 50 high-precision shoulder bolts, specifically Hamilton Sundstrand part number 821395-1, for prime contractors supporting DLA Weapons Support ASC projects. As these are designated Critical Safety Items, the work must be performed using CNC precision lathes and milling machines to meet strict aerospace tolerances. Quality assurance is managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The contractor is required to maintain AS9100, ISO 9001:2015, and CMMC Level 2 certifications to ensure compliance with aerospace and security standards. The project falls under NAICS code 336412 and is associated with the Department of Defense, with the place of performance located in Cherry Point. The final deliverable consists of 50 finished shoulder bolts meeting all specified technical requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Fabrication of Compressor Tube Assembly (NSN 4710006739816)This subcontract involves the fabrication of a compressor tube assembly, identified by NSN 4710006739816, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the bending, cutting, and fitting of steel tubing, along with welding or brazing and precision machining of end fittings. To ensure operational integrity, the contractor must perform rigorous pressure testing and leak detection on all units. All production must strictly adhere to Critical Application Item standards and comply with MIL-STD-1916 or ASQ H1331 quality requirements. The project falls under NAICS code 336412 and requires the delivery of fully completed and tested assemblies. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SCREW ASSEMBLY, PANEL

Solicitation # SPE4A6-27-T-3972

Solicitation SPE4A6-27-T-3972 is a fixed-price request for the procurement of 159 packages of Panel Screw Assemblies (NSN 5305-01-620-5067), identified as commercial items. The contract is issued by the DLA Weapons Support ASC Commodities Division and is designated as a HUBZone set-aside. Technical compliance is governed by TDP Rev A Gen 1 and reference drawing 8V613 HS6116, with specific part piece number HS6116HS0180. Delivery is required within 125 days to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with FOB terms specified as Origin. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001. Inspection and acceptance will occur at the destination based on FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Key compliance requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for invoicing. Additionally, the contract incorporates various FAR and DFARS clauses regarding subcontracting limitations, hazardous material identification, and the safeguarding of covered contractor information systems.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

VALVE, FUEL PRESSURIZIN

Solicitation # SPE4A7-26-T-768X

Solicitation SPE4A7-26-T-768X is a fixed-price procurement issued by DLA Aviation for the acquisition of fuel pressurizing and drain valves, identified by NSN 2915-00-775-9195. This is designated as a critical application item with no shelf life requirement. The procurement consists of two CLINs totaling six units, with approved part numbers from ITT Aerospace Controls LLC (AV17B1038D) and Eaton Corporation (6301). Delivery is required within 169 days, with a need ship date of March 17, 2027, and an original required delivery date of December 20, 2027. Shipments are directed to DLA Distribution Depot Hill in Utah and DLA Distribution Warner Robins in Georgia, with FOB, inspection, and acceptance all occurring at the origin. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 self-assessment and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Inspection will be conducted at the origin using sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted via the DLA Internet Bid Board System by September 28, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A1-27-T-0111

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1104

Solicitation SPE4A7-27-T-1104 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of two Output Assemblies, identified by NSN 2915015972028. The contract requires delivery within 143 days, with a need ship date of October 11, 2026, and an original required delivery date of May 26, 2027. Delivery is destined for DLA Dist San Joaquin in Tracy, California. The procurement is governed by NAICS code 336412 and includes specific requirements for destination inspection and acceptance under FAR 52.246-2. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Quality assurance requires compliance with SAE AS9003 or ISO 9001, with acceptance based on zero non-conformances in sample lots. Special material restrictions are in place, specifically prohibiting the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BLADE SET, TURBINE, A

Solicitation # SPE4A1-27-T-0114

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Supply of Hydraulic Fluid Filters (NSN 1650-01-187-5462)This subcontract, issued by the Department of Defense for DLA Aviation in Oklahoma City, involves the supply of new manufactured hydraulic fluid filters under NSN 1650-01-187-5462. The required hardware must meet Manufacturer Part Number 426676 for use in aluminum hydraulic fluid flap/slat pdu pressure lines. The contract specifies the delivery of 3 to 5 units on an F.O.B. Origin basis. To ensure quality and security, the provider must hold OEM authorization and maintain compliance with NIST SP 800-171 standards. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1 Rev E and MIL-STD-129 Rev R. The response deadline for this opportunity is November 12, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Military-Spec Packaging and Crating ServicesThis subcontract for Military-Spec Packaging and Crating Services supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves the specialized packaging of 37 sensitive electronic assemblies, requiring strict adherence to MIL-STD 129 Rev R and MIL-STD 2073-1 Rev E standards. To ensure the safety of the components and compliance with environmental regulations, the provider must utilize anti-static and ESD materials along with ISPM 15 certified heat-treated debarked wood to prevent the spread of invasive species. The opportunity is categorized under NAICS code 488510 and is associated with the DLA Aviation facility in Oklahoma City. Interested parties should note that the response deadline is November 14, 2026. The final deliverable consists of 37 securely packaged and crated assemblies fully prepared for shipment.

Freight Transportation Arrangement

POSTED

DEADLINE

in about 1 month

Backplane Assembly and UID LabelingThis subcontract for Backplane Assembly and UID Labeling supports DLA Aviation projects through the final assembly and marking of 37 Backplane Assemblies. The scope of work involves populating printed wiring boards with components and applying Unique Item Identification labels using tesa Secure Tape or an approved equivalent. All work must strictly adhere to MIL-STD-130N, Engineering Order 2011C1545-T, and the DOD Guide to Uniquely Identifying Items v3.0. The contractor is required to possess the necessary UID printing equipment to ensure compliance with Department of Defense standards for the agency located in Oklahoma City.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 1 month

Electronic Component Supply for Backplane AssemblyThis subcontract involves the supply of individual electronic components for prime contractors working on DLA Aviation projects for the Department of Defense. The scope of work requires the sourcing and delivery of military and aerospace grade resistors, capacitors, connectors, and integrated circuits as specified in the Bill of Materials for Drawing No. 948F941. The contractor is responsible for providing kitted components for 37 assemblies. Strict adherence to quality and regulatory standards is required, including the provision of Certificates of Conformance and full compliance with the Buy American Act. The opportunity is categorized under NAICS code 423610 and is managed by the DLA Aviation office in Oklahoma City.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

F-16 Backplane Printed Wiring Board FabricationThis subcontract involves the fabrication of 37 raw printed wiring boards for F-16 aircraft backplane assemblies, supporting prime contractors on projects for DLA Aviation within the Department of Defense. All manufacturing must strictly adhere to Drawing No. 948F941 and established aerospace-grade PCB standards to ensure the high precision required for these components. To qualify for this project, the provider must utilize high-precision fabrication equipment and maintain AS9100 quality certifications. Additionally, the contract mandates full compliance with the Buy American Act. The solicitation was posted on October 13, 2026, with a response deadline of November 14, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 1 month

Military-Grade Packaging and Crating ServicesThis subcontract for Military-Grade Packaging and Crating Services involves the specialized packaging of aircraft components for prime contractors delivering to the DLA Distribution Depot. The scope of work requires strict adherence to multiple military and industry standards, including MIL-STD-129 Revision R, MIL-STD-2073-1 Revision E, ASTM-D-5118, and Special Packaging Instruction F00-702-3504. The contractor must utilize heat-treated WPM compliant wood pallets and crates to deliver fully packaged and labeled aircraft diffuser cases ready for FOB origin shipment. Managed by the Department of Defense under the agency Ok DLA Aviation At Oklahoma City, the opportunity falls under NAICS code 339999. The solicitation was posted on October 13, 2026, with a response deadline set for November 13, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

in about 1 month

Manufacturing of Aircraft Diffuser CasesThis subcontract involves the manufacturing of up to 1,094 aircraft diffuser cases, specifically part number 6029T59G02, for prime contractors delivering to DLA Aviation under the Department of Defense. The production process requires the use of precision machining and forming equipment to ensure all units meet strict technical specifications. Compliance is a critical component of the agreement, requiring the implementation of Higher Level Contract Quality Requirements and Standard Inspection processes. Additionally, each unit must feature Item Unique Identification marking. The contractor is also obligated to maintain specific CMMC and CSO cybersecurity levels to protect sensitive information throughout the performance of the contract.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

Supply of Aerospace-Grade Raw Materials for Actuator HeadThis subcontract involves the procurement and delivery of certified aerospace-grade raw metal stock and specialized alloys to support prime contractors fulfilling DLA Aviation supply contracts for the Department of Defense. The primary objective is to provide the necessary raw materials for the manufacture of part number 1650-01-585-8779HS, specifically for use in actuator heads. To ensure strict adherence to industry quality and safety requirements, all supplied materials must comply with AMS or ASTM standards and be accompanied by the required Mill Test Reports. The opportunity is categorized under NAICS code 331210 and is managed through the DLA Aviation office in Oklahoma City, with a response deadline set for November 12, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Manufacturing of Linear Actuator Head (PN: 1650-01-585-8779HS)This subcontract involves the manufacturing of linear actuator heads under part number 1650-01-585-8779HS for prime contractors supporting DLA Aviation within the Department of Defense. The scope of work requires precision machining, including milling, turning, and finishing of both the actuator head housing and its internal components. To successfully execute the contract, the provider must utilize CNC machinery and precision measurement tools to ensure all deliverables meet strict DoD quality standards for aircraft components. The opportunity was posted on October 13, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 336413, the project is managed through DLA Aviation in Oklahoma City. The final deliverable for this engagement is the completed linear actuator head produced according to the specified technical requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Rotary Pump Supplier (NSN 4320-00-288-5375HS)This subcontract involves the supply of 60 new manufactured rotary pumps, specifically Part Number 712180, to prime contractors supporting DLA Aviation projects for the Department of Defense. These pumps are designed to deliver oil to internal components and must be produced using precision manufacturing and laser etching equipment. The contractor is responsible for ensuring all units meet strict military standards, including UID markings per MIL-STD-130N and packaging requirements according to MIL-STD-2073.1 Rev E and MIL-STD-129 Rev R. A Certificate of Conformance is required for the delivery of the units. The opportunity was posted on October 13, 2026, with a response deadline of November 14, 2026.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

in about 1 month

BACKPLANE ASSEMBLY_End_Item_F16_NSN_5998012796019 HY_PN_948F941-1

Solicitation # SPRTA127Q0044

Solicitation SPRTA127Q0044 is a firm-fixed-price request for the manufacture and delivery of 37 Backplane Assembly Printed Wiring Assemblies for F-16 aircraft. The required items are identified by NSN 5998-01-279-6019 HY and manufacturer part number 948F941-1. The procurement is managed by the Department of Defense through DLA Aviation at Oklahoma City, with a required delivery date of June 1, 2028, to the DLA Distribution Depot at Hill AFB, Utah. This is not a small business set-aside, and offers will be evaluated based on price and technical factors, with risk assessments conducted via the Supplier Performance Risk System. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for Unique Item Identification (UID) and MIL-STD 129 Revision R and MIL-STD 2073-1 Revision E for packaging. Specific requirements include the use of heat-treated debarked wood for packaging and the application of a specific UID label to the front of the card above the connector. Administrative requirements include electronic invoicing through Wide Area WorkFlow (WAWF) and compliance with the Buy American Act and cybersecurity standards for safeguarding covered defense information. Responses are due by November 12, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS