This Solicitation opportunity from Government of Canada was posted on January 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mower Blades & Flails

Closed

BC26-127_TOLInternational

Submission Closed01/29/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332216

New

DIBBS

RATCHETThe contract solicitation is for a ratchet identified by NSN 3950-01-544-2793 with a requested quantity of one unit under purchase request 7017607453. The solicitation is issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE8EE-26-T-2174 and was posted on July 26, 2026. Responses are due by August 6, 2026, and the solicitation is classified as a federal procurement with no specific set-aside type designated. The place of performance and office address details are not provided, and the point of contact information is missing. The full solicitation details can be accessed via the DIBBS portal at the provided URL.

Defense Logistics Agency

POSTED

DEADLINE

SCISSORS ASSY, MAINThe contract pertains to the procurement of six SCISSORS ASSY, MAIN units with the NSN and part number 1615-01-165-6868, issued under solicitation number SPE4A5-26-T-308R by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a window for suppliers to submit bids or proposals for this federal requirement. The item is designated for federal use, and while specific details regarding the point of contact, delivery location, and set-aside status are not provided, the procurement is managed under standard DLA procedures and accessible via the DIBBS platform for further documentation or submission. All activities are governed by the terms and conditions associated with Department of Defense contracting practices.

Defense Logistics Agency

POSTED

DEADLINE

LEVER, MANUAL CONTROLThe contract is for a manual control lever with NSN/part number 3040-01-221-7801, with a purchase request quantity of two units. It is issued under solicitation number SPE7L1-26-T-876G by the Defense Logistics Agency, a component of the Department of Defense, under a federal procurement mechanism. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and no specific set-aside or NAICS code is designated. The place of performance and office address details are not specified, but the contract is governed under U.S. federal procurement rules. Interested parties must submit proposals through the official DIBBS portal via the provided link before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

5180014263972, Tool Kit, PipefittersThe General Services Administration’s Supply Chain Management Contracting Division is seeking quotes for the Pipefitters Tool Kit (NSN 5180014263972) under RFQ 47QSSC26Q0237, with submissions due by July 28, 2026. This is a firm-fixed-price procurement issued on a brand-name basis, not set aside for small businesses, and evaluated solely on low price after administrative compliance. Vendors must be registered to receive purchase orders electronically via the OMS Vendor Portal or EDI. All deliveries are FOB Destination within the Continental United States, with exact delivery locations specified on individual purchase orders. Proposals must fully complete all required fields on pages 1 and 2 of the RFQ and satisfy all administrative requirements in Section 3; failure to do so results in automatic disqualification. The contract mandates strict adherence to military and commercial packaging, preservation, and marking standards, primarily MIL-STD-129R for labeling and shipping, ASTM D-3951 for commercial packaging, and MIL-STD-2073-1 for preservation. All units must be properly marked with NSN, CAGE code, contract number, preservation method and date, shelf life, and hazard information where applicable. Exteriors require Military Shipping Labels with 2D PDF417 barcodes containing TCN, TAC, consignee, gross weight, and RDD. Hazardous materials must comply with DOT HMR and OSHA HazCom standards, including proper labeling and SDS submission. Wood packaging must meet ISPM-15 requirements. Inspection and acceptance occur at the destination, with the vendor responsible for 100% compliance. Invoicing is required through electronic systems, and all vendors must provide valid CAGE codes and meet registration prerequisites to be considered for award.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

NSN 5120-01-334-3162 (LIFTER, BOWL SHELL)The General Services Administration’s Supply Chain Management Contracting Division is soliciting quotes for NSN 5120-01-334-3162, a brand-name-only item known as a LIFTER, BOWL SHELL, under solicitation number 47QSSC-26-Q-0214. This procurement is not a small business set-aside and will be awarded using the Lowest Price Technically Acceptable (LPTA) method, meaning vendors must first meet all administrative and technical compliance requirements—including submitting complete RFQ and MIL-STD-129 forms, IPD, and brand name justification—to be considered, after which the lowest responsive and responsible offeror will be selected. Deliveries must be made FOB Destination within the Continental United States, with ultimate consignees potentially located OCONUS via consolidation points, and all shipments must strictly adhere to MIL-STD-129R marking and labeling standards, including accurate NSN, CAGE code, contract number, preservation details, and 2D PDF417 barcoding on all containers. The contractor must also ensure compliance with packaging standards such as ASTM D-3951 for non-hazardous items and GSAM 552.223-73 for hazardous materials, and must be registered or willing to register with the EDI or OMS vendor portal for electronic order receipt. The solicitation closes on July 31, 2026, and submissions must be emailed to erin.ji@gsa.gov; incomplete or late submissions will be disqualified. Although no formal FAR contract clauses are cited, the procurement is governed by GSAM provisions and DoD directives including DODM 4100.39 and DODI 4140.69, which underpin the brand-name justification and supply chain integrity requirements. No contract value or line-item pricing is provided in the solicitation, and payment, invoicing, and contracting officer representative details are not explicitly stated, with communication and submission oversight centralized through the designated point of contact.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Combination Wrench Set SupplyNashville Electric Service is seeking proposals for the supply of 4-piece combination wrench sets featuring a six-point design, specifically engineered to meet the mechanical and safety standards required for use in electrical utility operations. The contract is issued as a subcontract with a North American Industry Classification System code of 332216, indicating the focus on forged steel tool manufacturing. Proposals must be submitted by July 30, 2026, at 7:00 PM Eastern Time, following a posting date of July 24, 2026. The tools are intended for performance in Nashville, Tennessee, and must comply with industry-grade durability and precision requirements to ensure safe handling in high-risk electrical environments. Interested vendors can access further details and submit responses through the official bidding portal at the provided URL.

Nashville Electric Service

POSTED

DEADLINE

Combination Square SupplyNashville Electric Service is seeking suppliers to provide 18 individual combination squares under a subcontract arrangement, with the requirement tied to a prime contract. The solicitation, posted on July 24, 2026, has a response deadline of July 30, 2026, at 7:00 PM, and is classified under NAICS code 332216, indicating it relates to the manufacturing of metalworking machinery and tools. The place of performance is specified as Nashville, though no further geographic details are provided. The contract does not indicate a set-aside designation or organization type, and no point of contact is listed. Interested parties must submit responses through the vendor portal accessible via the provided link.

Nashville Electric Service

POSTED

DEADLINE

Insulated Nut Driver Set SupplyNashville Electric Service is seeking qualified suppliers to provide 10-piece insulated nut driver sets that meet ASTM F1505 standards for electrical safety, ensuring protection for workers in live electrical environments. The contract is structured as a subcontract and requires full compliance with the specified safety certification to guarantee performance and reliability under high-voltage conditions. The solicitation was posted on July 24, 2026, with responses due by July 30, 2026, and the products must be delivered to perform in Nashville, Tennessee. The North American Industry Classification System code 332216 identifies this as a manufacture of hand tools procurement, indicating the need for manufacturers or authorized distributors with proven capability in producing industry-compliant tooling. Interested parties must access the vendor portal via the provided link to submit proposals, and no set-aside preferences are designated for this opportunity.

Nashville Electric Service

POSTED

DEADLINE

Nut Driver, Steel Blade & WrenchThe contract solicits four distinct hand tools for use by Nashville Electric Service, all requiring compliance with industry safety standards and approved manufacturer specifications. Included are two insulated nut drivers—one sized at 7/16 inch and another at 5/8 inch—each featuring a hollow shaft of six inches, an insulated handle rated for 1000 volts, and certification to ASTM F1505 standards. Approved manufacturers for these nut drivers include Salter, Jameson, Cementex, and Wiha, with specific part numbers listed for procurement. Also required is a 12-inch combination square with a coated steel blade, equipped with a level vial and scriber, sourced exclusively from approved suppliers such as Stanley, Westward, and Johnson. Additionally, a 7/16 inch six-point combination wrench with either chrome or satin finish is needed, with authorized vendors including Armstrong, Proto, and Snap-on. The quantities specified are two units of the 7/16 inch nut driver, four of the 5/8 inch nut driver, eighteen of the combination square, and four of the combination wrench. The solicitation, identified as Z4862, was posted on July 24, 2026, with a response deadline of July 30, 2026, and is managed by the Nashville Electric Service under the Tennessee state agency framework. The procurement is classified under SLED (State, Local, and Education) and requires delivery to Nashville, Tennessee. Only the listed approved manufacturers and part numbers are acceptable, with exact quantities tied to specific item numbers and unit of issue designations. The primary point of contact for procurement inquiries is K. Kegley, reachable via email and phone. All items must meet the stated technical and safety requirements to qualify for award, and bids must be submitted through the designated vendor portal before the closing date.

Nashville Electric Service

POSTED

DEADLINE

INTRENCHING TOOL,HANDThe Department of National Defence is seeking to procure 1,000 hand entrenching tools under GSIN 5120 and NSN 5120-25-1456953, or an equivalent approved substitute, with part number 27510 and NCAGE code N0065. The tools are to be delivered in equal quantities of 500 units each to two Canadian Force Supply Depots: 25 CFSD Montreal at 6363, rue Notre-Dame Est, Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd St., Building 236, Edmonton, Alberta. All deliveries must be completed within 90 days of contract award. Bidders proposing an equivalent or substitute product must clearly identify the brand name, model, part number, and NCAGE code of the alternative item. This procurement is conditionally set aside under the federal government’s Procurement Strategy for Aboriginal Business, requiring bidders to comply with the specific eligibility and reporting criteria outlined in Annex 9.4 of the PWGSC Supply Manual. The solicitation, numbered W8486-270869/A, was posted on July 24, 2026, with responses due by August 14, 2026, and all documentation may be submitted in either English or French. The Crown reserves the right to negotiate terms with any supplier, and inquiries should be directed to Contracting Authority Luca Falsetto at the provided contact information.

Department of National Defence

POSTED

DEADLINE

Precision Manufacturing of Roller Tube AssemblyThe contract involves the manufacture of a precision roller tube assembly identified by NSN 3456-01-693-5486, requiring strict adherence to Defense Logistics Agency technical standards for material, packaging, and quality. The specified material code RA001, packaging requirement RP001, and quality standard RQ011 must be fully met to ensure compliance and performance under military specifications. This is a subcontract opportunity issued by the Department of Defense through the Defense Logistics Agency, with the place of performance listed as FPO, ZIP 34085. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, with the NAICS code 332216 indicating classification under Other Fabricated Metal Product Manufacturing. Contractors must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Calibration Fixture Manufacturing and DeliveryThe contract requires the manufacture and delivery of one precision calibration fixture with Part Number 152D5256 and NSN 5220-01-289-6319, fully compliant with technical and quality standards set by the Defense Logistics Agency. The work must be performed to meet all DLA specifications, ensuring the fixture meets exacting requirements for calibration accuracy and reliability in defense applications. The subcontract is solicited under NAICS code 332216, which classifies it within the precision forging and stamping industry, indicating a high-precision manufacturing capability is essential. The response deadline for submission is August 3, 2026, and the contract is set to be performed at a place of performance in Fort Worth, Texas, with ZIP code 76127-5000. The contract was posted on July 23, 2026, and is issued under the Department of Defense through the Defense Logistics Agency. No set-aside provisions or specific organizational type requirements are indicated, suggesting the opportunity is open to eligible contractors without demographic or size restrictions. The detailed technical parameters and performance expectations are outlined in the DLA specifications, with the successful bidder responsible for full compliance and timely delivery.

Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The Township of Langley is inviting bids from qualified firms to supply mower blades and hardware for their mower fleet throughout the year 2026, operating on an as-needed basis. The contract covers the period from January to December 2026, with the highest demand anticipated during the mowing season from March to November. Suppliers must register as Plan Takers on the Township's bidding system to obtain documents and receive any addenda, ensuring their eligibility to submit a bid. The solicitation, identified as BC26-127_TOL, was posted on January 2, 2026, with a submission deadline of January 29, 2026. This opportunity is managed by the Township of Langley under the Government of Canada framework, with all communications directed through the designated Contracting Authority via the provided email. Bidders should note that any changes to bid dates will not be updated on BC Bid. The place of performance is within the Township, though specific location details are not disclosed. Prospective vendors interested in serving the Township’s seasonal supply needs for mower blades and flails should follow the outlined registration and bidding procedures to participate fully in the selection process.

General Info

Township of Langley seeks bids for mower blades supply, January-December 2026, seasonal demand March-November.

Agency

Government of Canada → Township of Langley

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 2

Solicitation

Response DeadlineJan 29

Deadline has passed

Submission Closed

01/29/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Township of Langley

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Township of Langley

Office AddressN/A

Contacts

Contracting Authority

contact@example.gov

Full Description

The Township of Langley is seeking a firm to supply Blades & hardware for their mower fleet, from January 2026 – December 2026, on an “an and when requested” basis. This is a seasonal requirement, with higher demand during the mowing season (March – November)To obtain documents, please visit our Bidding System https://tol.bidsandtenders.ca. Note: In order to submit a response to this Bid the proponent MUST register as a Plan Taker for this opportunity. Only by being registered, can a proponent be certain to receive addenda notifications. Dates The Township will not update BC Bid of any date changes related to this Bid.