Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MUFFLER, EXHAUST

Active
SPE7L5-26-T-4728Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a muffler and exhaust component identified by NSN 2990-01-366-7020 and part number 88-21109, supplied by NELSON GLOBAL PRODUCTS, INC. with contract number SPE7L5-26-T-4728. The item must strictly conform to the source-controlled drawing and technical specifications referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. All items must meet configuration control standards and require adherence to strict environmental restrictions including a complete prohibition of Class I ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific authorized applications such as batteries, fluorescent lights, and instrument sensors as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract mandates packaging in accordance with ASTM D3951, but DLA requirements supersede this standard, and all packaging must be labeled per MIL-STD-129 and palletized per DLA Packaging Requirements. Items are to be delivered FOB origin, with no variance allowed in quantity, inspected and accepted at destination, and must be ready for delivery by February 3, 2026, under a 61-day delivery schedule. Packaging and shipping details are governed by DLA procedures including designated delivery address in New Cumberland, Pennsylvania. The contract also identifies the item as a critical application item with potential covered defense information, and all substitutions or deviations require formal engineering change proposals and approval.

General Info

Procurement of muffler and exhaust component NSN 2990-01-366-7020, compliance with DLA specs, no mercury or ozone-depleting chemicals, FOB origin, delivery by February 3, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L5-26-T-4728 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
RANDY ITH
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MUFFLER,EXHAUST
MUFFLER, EXHAUST
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SPE7L5-26-T-4728
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
NELSON GLOBAL PRODUCTS, INC. 4NWG5 P/N 22907-A
TDP Rev A Gen 1 IAW BASIC DRAWING NR 30554 88-21109 REVISION NR L DTD 03/04/2015 PART PIECE NUMBER: P/N 88-21109
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 30554 88-21109 REVISION NR DTD 09/30/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 30554 88-21109 REVISION NR L DTD 03/04/2015 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7013268810 0001 EA 19.000
NSN/MATERIAL:2990013667020
DELIVERY (IN DAYS):0061
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
SPE7L5-26-T-4728
SECTION B
PR: 7013268810 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/03/2026 Original Required Delivery Date:01/21/2026
SPE7L5-26-T-4728 NSN/Part Number: 2990-01-366-7020 Quantity: 19 EA Purchase Request: 7013268810QTY: 19 Delivery: 61 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
REFILL BLADE, WIPER
Solicitation # SPE7L3-26-T-144P
This contract specifies the procurement of wiper blade refills under the NSN 2540014540415, with a total quantity of 264 units to be delivered FOB origin within 78 days of contract award. The items must comply with DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129, with individual commercial skin packs acceptable as the unit packaging method. No ozone-depleting chemicals are permitted in the manufacture or incorporation of these items, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract identifies specific approved part numbers from Trico Products Corporation, AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP, all corresponding to the same NSN. Delivery is directed to the DLA Distribution center in New Cumberland, Pennsylvania, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and all shipments must adhere to DLA transport and freight protocols outlined in procedural notes C19 and C20. The solicitation number is SPE7L3-26-T-144P, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office, with a response deadline of August 13, 2026, and a posted date of August 2, 2026. The NAICS code 336390 identifies the classification as Other Transportation Equipment Manufacturing. The primary point of contact is Amber Rohly, reachable via email and phone provided. Packaging must be palletized in accordance with DLA requirements, and the special marking code indicates no additional special markings are required. The original required delivery date is December 17, 2025, with a need ship date of December 9, 2025, aligning with the 78-day delivery window. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements govern performance unless modified by solicitation amendment, and simplified acquisition rules apply with the Master List revision in effect on the solicitation issue date controlling compliance.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-318T
The contract specifies the procurement of a single unit of a wire rope assembly identified by NSN 4010-01-515-0994 and part number 2HA913 for OSHKOSH DEFENSE LLC and 4000056-013 for MANITEX INC, under solicitation SPE4A5-26-T-318T. Delivery is required within 120 days to the DLA Distribution Barstow receiving facility in Barstow, California, with FOB origin terms and zero tolerance for quantity variance. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging standards. Inspection and acceptance both occur at the destination, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major with verification levels aligned to AQLs of 0.1, 1.0, and 4.0. The unit of issue is EA, with a total price of one unit at the contracted rate, and the required ship date is December 9, 2026. All transportation logistics are to follow DLAD Proc Notes C19 and C20, and the point of contact for the contract is Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336390
New
DIBBS
PIPE, EXHAUST
Solicitation # SPE7L5-26-T-4729
The contract pertains to the procurement of four exhaust pipes identified by NSN 2540015662444 and part number 3642499 under solicitation SPE7L5-26-T-4729, with a unit price of $4.00 per unit and a total contract value of $16.00. Delivery is required within 116 days from the contract award, with FOB origin terms and no tolerance for quantity variance—exactly four units must be delivered. Inspection and acceptance occur at the destination, which is the DLA Distribution facility in New Cumberland, Pennsylvania, with specific shipping instructions outlined in DLAD Proc Note C19 and C20. Packaging must comply with DLA Master List requirements, prioritizing any technical or quality specifications referenced by R or I numbers over standard commercial practices; if the item is non-hazardous under Fed-Std-313, it must be packaged per ASTM D3951, otherwise per TQ requirement IP025, and all packaging must be labeled per MIL-STD-129. The unit of issue is each, and palletization must adhere to DLA packaging standards. The original required delivery date was November 23, 2026, but the need ship date is set for December 8, 2026, reflecting a flexible timeline under the 116-day delivery window. The contract falls under NAICS code 336390 and is administered by the Department of Defense’s Land Supplier Operations Engines office, with Bradley Evans listed as the primary point of contact.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5943
The contract pertains to the procurement of a single unit of a box and accessories designated by NSN 2540016429281 and part number B38, supplied by SIEMENS ENERGY AND AUTOMATION INC, under solicitation SPE7L4-26-T-5943. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must conform to RP001 specifications. Hazardous materials, if applicable, must meet TQ requirement IP025 per FED-STD-313, while non-hazardous items must be commercially packaged. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly authorized by specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated military address at Fort Hood, Texas, with specific marking and shipment instructions including the TCN W80XYJ62080280 and project code TP 1. The required delivery date is July 30, 2026, and all government-specific identifiers and codes must be accurately applied for tracking and compliance.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
VALVE, BRAKE PNEUMAT
Solicitation # SPE7L3-26-U-0667
The contract solicitation SPE7L3-26-U-0667 is for the procurement of 30 units of the pneumatic brake valve identified by NSN 2530015765332 and part number BW K031485, issued by the Defense Logistics Agency under a Total Small Business Set-Aside. The contract is structured as an Indefinite Delivery Contract with a ceiling value of $350,000 and a guaranteed minimum of four units, though the quantity of 30 is estimated and not guaranteed. Delivery is required within 75 days after order placement under FOB Origin terms, with inspection and acceptance occurring at the destination point. Packaging and labeling must strictly comply with MIL-STD-129 for marking, barcoding, and shipment identification, while commercial packaging for non-hazardous items must meet ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. Hazardous materials must be packaged per TQ Requirement IP025 in accordance with FED-STD-313. Palletization is governed by RP001 DLA Packaging Requirements, and all packaging must be marked per the specified unit of issue and quantity per unit pack. The contract includes a comprehensive set of clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards, subcontracting, inspection, default, and compliance with NIST SP 800-171 for safeguarding covered defense information. Invoicing must be submitted electronically through WAWF, and the contractor must comply with all representations and certifications regarding small business status, unique entity identifiers, CAGE codes, and prohibitions on the use of covered defense telecommunications equipment. The point of contact for this solicitation is Aaron Moore of the Department of Defense’s Land Supplier Operations Vehicle Support, and responses must be submitted via the DLA Internet Bid Board System by the August 17, 2026 deadline.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-11EF
The contract specifies the procurement of 117 units of screw cap hexagon head with NSN 5305015742999 under solicitation SPE4A6-26-T-11EF, requiring delivery within 152 days to DLA Distribution Barstow in California. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged and labeled according to MIL-STD-129 and RP001 packaging guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Packaging must be palletized per DLA requirements and conform to the prescribed Unit of Issue and Quantity per Unit Pack. Transportation details are governed by DLAD PROC NOTES C19 and C20, and the required ship date is January 10, 2027, matching the original delivery deadline. The contract identifies Oshkosh Defense LLC and Plasan North America, Inc. as manufacturers with respective part numbers, and the point of contact is Antonia Willcox with the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336390
New
DIBBS
GUARD SPLASH
Solicitation # SPE7L4-26-U-1047
This contract pertains to the procurement of 112 left rear mudguards, designated as GUARD SPLASH, for use on the M1 tank, identified by NSN 2540-01-456-0508. The requirement is part of a solicitation issued under number SPE7L4-26-U-1047, with a response deadline of August 17, 2026, and a delivery expectation within 80 days after order. The acquisition is set aside exclusively for Women-Owned Small Businesses under NAICS code 336390 and managed by the Department of Defense’s LSO Combat Vehicles and Armament office. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the procurement size. The item contains technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer to foreign persons or entities, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging must adhere to DLA procurement standards, and the vendor must be a CMMC Level 2 certified third-party assessment organization to meet cybersecurity requirements. All communications and inquiries should be directed to the primary point of contact, Heather Kessler, via provided email and phone number.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
MAT, FLOOR
Solicitation # SPE7L1-26-U-0537
The contract pertains to the procurement of a floor mat with NSN 2540-01-577-3475 and part number 18-62801-001, under solicitation SPE7L1-26-U-0537, issued by the Department of Defense’s Land Supply Chain. A total of 10 units are required at a fixed unit price, with delivery expected within 80 days FOB origin under a DLA Direct, CONUS coverage arrangement. The quantity is firm with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master requirements, prioritizing specifications from the DLA Master List of Technical and Quality Requirements over ASTM D3951, and all packaging must be marked and labeled per MIL-STD-129. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. Palletization must adhere to RP001 standards, and the unit of issue is each (EA). This solicitation is a total small business set-aside under NAICS code 336390, with responses due by August 17, 2026, and was posted on August 2, 2026. Primary point of contact is Dov Sneward at DLA Land Post Award.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L1-26-U-0533
The contract pertains to the procurement of 32 vehicular rear mirror assemblies with part number A22-67809-001 and NSN 2540-01-605-0285 under solicitation SPE7L1-26-U-0533, issued by the Department of Defense through the Land Supply Chain organization. The requirement is a total small business set-aside under NAICS code 336390, with delivery due within 80 days FOB origin and no variance allowed in quantity. All items must be packaged in strict compliance with DLA’s Packaging Requirements for Procurement and MIL-STD-129, and all technical and quality specifications referenced under the DLA Master List of Technical and Quality Requirements take precedence over any other standards such as ASTM D3951. Packaging must adhere to Fed-Std-313 guidelines, with hazardous materials requiring compliance with TQ requirement IP025. Inspection and acceptance occur at the destination point. The unit of issue is each, with a total price of $32.00, and the contract mandates that all packaging be labeled with correct unit of issue and quantity per unit pack as specified. The solicitation window closed on August 17, 2026, and the contract is managed by Dov Sneward at DLA Land Post Award.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
BUMPER, VEHICULAR
Solicitation # SPE7L1-26-U-0541
The contract is for the procurement of a vehicular bumper with NSN 2540-01-604-7831 and part number A21-28518-100 from Daimler Truck North America LLC, under solicitation SPE7L1-26-U-0541, issued as a total small business set-aside under NAICS code 336390. The quantity is seven units, with delivery required within 80 days FOB origin, and no variance is permitted in the quantity ordered. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must also adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 standards. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. The unit of issue is each, and all packaging must reflect the specified quantity per unit pack. The contract is part of a DLA direct, CONUS procurement, and removal of government identification is required from any non-accepted supplies prior to return. Contract data indicates it was posted on August 2, 2026, with a response deadline of August 17, 2026, and the primary point of contact is Dov Sneward at DLA Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
VENTILATOR, AIR CIRC
Solicitation # SPE7LX-26-U-9123
The contract specifies the procurement of 188 units of a ventilator for air circulation with NSN 2540-01-576-7334 and part number 22-72184-000 under solicitation SPE7LX-26-U-9123, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 80 days at FOB origin with no tolerance for quantity variance, meaning exactly 188 units must be provided. Inspection and acceptance occur at the destination, and the equipment must be packaged in strict compliance with DLA’s packaging requirements referenced as RP001, including MIL-STD-129 labeling and palletization standards. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging aligned with DLA requirements applies. The procurement is a Total Small Business Set-Aside under NAICS code 336390, and the contract mandates complete removal of government identification from non-accepted supplies. The sole point of contact is Theodore Misiolek, with a response deadline of August 17, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
KIT SERVICE 5KW Supply and DeliveryThe contract entails the supply and delivery of the KIT SERVICE 5KW with National Stock Number 2940016273978, ensuring full compliance with military logistics standards and DPAS requirements. The scope includes proper packaging, labeling, and shipment protocols aligned with Department of Defense specifications to support timely and accurate distribution within the military supply chain. This subcontract is issued under NAICS code 336390 and managed by the Defense Logistics Agency, indicating its critical role in sustaining defense operations through reliable technical support assets. The award is tied to a specific delivery contract referenced through the DIBBS system, and performance is expected to meet stringent federal procurement and logistical mandates.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 333618
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L5-26-T-4727
The contract is for the procurement of a fuel injection nozzle with part number 1W8207 and NSN 2910012064532, supplied by CATERPILLAR INC, under solicitation SPE7L5-26-T-4727. Four units are required to be delivered within 45 days of contract award with a strict zero variance in quantity, delivered FOB origin to the designated receiving warehouse in Tracy, California. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951; packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including proper palletization. The units must be labeled and marked correctly per contract specifications, with the Unit of Issue as a single unit and Quantity per Unit Pack set to one. Inspection and acceptance occur at the destination, and delivery is required by June 5, 2026. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the point of contact is Randy Ith with the Department of Defense.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L5-26-T-4732
The contract pertains to the procurement of one bracket, angle item with NSN 5340016060220 and purchase request number 7016785760, totaling four units across two line items—one unit and three units respectively—with a firm fixed price of $3.00 total and no quantity variance permitted. Delivery is required within 88 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, while hazardous materials require compliance with TQ requirement IP025. All items must be palletized per RP001 guidelines and packed with a quantity per unit pack of one. Two delivery addresses are specified: one for New Cumberland, Pennsylvania, and one for Barstow, California, with corresponding parcel post and freight shipping instructions. The required ship date is November 10, 2026, with the original delivery deadline set for January 25, 2027. Transportation directives reference DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L5-26-T-4732, categorized under NAICS code 332510, managed by the Department of Defense’s Land Supplier Operations Engines, with primary contact Bradley Evans.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L5-26-T-4726
This contract pertains to the procurement of five units of a covered access item identified by NSN 5340011800621 and part number P12613027N from Fairbanks Morse, LLC, to be delivered within 189 days from the contract award with a required ship date of February 19, 2027. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination warehouse located in Tracy, California. Packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation methods and container codes outlined, and palletization must comply with DLA packaging requirements. The item is classified as a critical application item, and all packaging, preservation, and marking processes are prohibited from containing mercury or mercury compounds, with exceptions only for approved functional uses in batteries, lighting, instruments, sensors, weapon systems, or specific chemical reagents as defined by NAVSEA. Portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List, and documentation for source approval must meet RC001 requirements. Government identification must be removed from non-accepted supplies, and the contract falls under DLA’s simplified acquisition procedures with terms controlled by the revision of the Master List in effect on the solicitation issue date. All shipments must comply with hazardous materials handling procedures and use the designated parcel post and freight shipping address.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L5-26-T-4725
The contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-546-9412 and part number 00085140708, supplied by Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4725. Delivery is required within 173 days, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required and no use of mercury or mercury compounds in preservation, packaging, or marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must meet RC001 standards. Mercury-containing components are prohibited except in specific instances such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any such devices must include a secondary containment. The items are subject to a zero variance in quantity and must be palletized per DLA packaging requirements. The point of contact for inquiries is Christopher Walker, and the solicitation closed on August 10, 2026, with a required delivery date of January 31, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
PACKING RING ASSEMB
Solicitation # SPE7L5-26-T-4733
This contract pertains to the procurement of a packing ring assembly identified by NSN 2825-00-421-7496 and part number 571L146PC43, with a total quantity of 13 units under unit of issue AY. The requirement is governed by stringent packaging and preservation standards per MIL-STD-2073-1E and MIL-C-16173, mandating immediate preservation of ferrous metal labyrinth packing rings with P-2 preservative after cleaning, while nonferrous materials are exempt. Each ring segment must be individually bagged and overwrapped with quarter-inch thick cushioning material conforming to PPP-C-850, Type II, Class 1, segregated by ASTM D4727 fiberboard separators and cushioned within the container with at least one inch of compliant cushioning material. Sets weighing under 40 pounds must be packaged in ASTM D5118 fiberboard boxes, while those 40 pounds or heavier require overseas-style wood boxes per ASTM D6251 or PPP-B-621, closed and strapped with flat steel strapping conforming to ASTM-D-3953 Finish C. All packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with no allowance for quantity variance. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the required delivery date is 86 days from the contract award, with a need ship date of August 4, 2026, and original delivery due by September 11, 2026. The item is designated as a critical application and is subject to DLA’s technical and quality requirements referenced through the DLA Master List, and the supplier must comply with mercury restrictions, prohibiting intentional addition or direct contact unless exempted for specific functional uses such as batteries or sensors, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Additionally, the contractor must maintain CMMC Level 2 cybersecurity self-assessment compliance and fulfill all terms under a Total Small Business Set-Aside, with performance addressed to the DLA San Joaquin Distribution Center in Tracy, California.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
CONNECTING ROD, PIST
Solicitation # SPE7L5-26-T-4737
The contract is for the procurement of 168 connecting rods for pistons, identified by NSN 2815-01-271-5119 and part numbers 2DR678 from OSHKOSH DEFENSE LLC and 5266243 from CUMMINS INC. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The item may involve casting or forging processes, and contractors are directed to submit a Casting and Forging Assistance Request if they lack necessary tooling or materials. Delivery must be made FOB origin within 79 days of contract award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and be marked per MIL-STD-129 with special marking code 24 indicating openness for inspection. Packaging must align with DLA’s initiative to reduce plastic use while ensuring adequate protection. The contract is a total small business set-aside under NAICS code 333618, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The required ship date is November 1, 2026, and the solicitation closed on August 13, 2026, with prime contact Bradley Evans at DLA.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L5-26-T-4731
The contract pertains to the procurement of a wiring harness with NSN 6150-01-514-1692 and part number 3462464, for a quantity of six units, under solicitation SPE7L5-26-T-4731. Delivery is required within 88 days of the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking requirements per MIL-STD-129. Special handling applies as the item is designated as protected cargo, requiring omission of all item nomenclature on shipping containers to ensure security and confidentiality. The packaging must also indicate reusable container status per MIL-STD-2073-1 Appendix C, with clear labeling for reuse. Cables must be coiled to minimize volume without compromising functionality or damaging connectors, and secured to prevent kinking. The delivery address is DLA Dist San Joaquin in Tracy, California, and transportation follows DLA procurement notes C19 and C20. This item is classified as a repairable component and must be packaged in containers that allow for return and reuse. The unit price is $6.00 per unit, with a total contract value of $36.00. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the original required delivery date is January 25, 2027, though the need ship date is November 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the controlling revision determined by the solicitation or award date. The point of contact for this procurement is Bradley Evans of the Department of Defense, reachable via email and phone listed in the contract data.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L5-26-T-4730
This contract specifies the procurement of a special-purpose electrical cable assembly with part number 1771530W and NSN 6150-01-320-0719, issued under solicitation SPE7L5-26-T-4730 for OSHKOSH DEFENSE LLC. A quantity of 298 units is required at a unit price of $298.00, totaling $88,804.00, with delivery mandated within 32 days after award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including labeling per MIL-STD-129 with no special marking. The item is designated as a critical application item, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Technical and quality standards referenced are contained in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. Delivery is to DLA Distribution Red River, Building 499, Texarkana, TX, with a required ship date of September 15, 2026, and an original delivery deadline of November 3, 2026. Transportation and freight procedures follow DLA procurement notes C19 and C20, and the solicitation was posted on August 2, 2026, with responses due by August 13, 2026. The point of contact is Bradley Evans of the Department of Defense, LAND SUPPLIER OPNS ENGINES.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE7L5-26-T-4736
The contract pertains to the supply of spacer sleeves identified by NSN 5365-01-547-5873 and part number 26001900088, with a total quantity of twelve units to be delivered within five days. All items are classified as commercial off-the-shelf and must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. Packaging must be palletized according to DLA guidelines, and shipment must occur via the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The item is designated as a critical application component, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except in specific sanctioned uses such as batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as mandated by NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. All documentation references the DLA Master List of Technical and Quality Requirements, and the solicitation number SPE7L5-26-T-4736 is a total small business set-aside under NAICS code 332999. Delivery is directed to the U.S. Naval Station in National City, California, with the original required delivery date set for July 24, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
FITTING ASSEMBLY, AI
Solicitation # SPE7L5-26-T-4734
The contract is for a fitting assembly designed for an air flow sensor, identified by NSN 4730-01-297-8354, with a quantity of 35 units required under purchase request 7013880302. The item is subject to strict export control regulations due to the presence of technical data governed by either the International Traffic in Arms Regulations or the Export Administration Regulations, making unauthorized disclosure to foreign persons—regardless of location—a violation. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA authority. The Defense Logistics Agency enforces these restrictions under DFARS 252.225-7048 to ensure compliance with national security requirements. Delivery is mandated within 93 days after order issuance, with performance located at Cherry Point, North Carolina, 28533-5040. The solicitation, issued under number SPE7L5-26-T-4734, was posted on August 2, 2026, with responses due by August 13, 2026, and falls under NAICS code 332996 for other miscellaneous fabricated metal product manufacturing. The contracting entity is the Department of Defense via the Land Supplier Operations Engines organization, with Paul Doerfler listed as the primary point of contact for inquiries, reachable via email and phone provided. The solicitation is classified as a federal procurement with no set-aside designation, and all interested parties must navigate the DIBBS portal to access full documentation and submit proposals. Compliance with packaging requirements as defined by DLA and strict adherence to export control protocols are mandatory conditions for participation and contract award.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, ACTUATOR
Solicitation # SPE7L5-26-T-4735
The contract is for the procurement of 50 units of a PLUG, ACTUATOR with NSN 4730-00-549-3599 and part number 41001053 manufactured by WOODWARD HRT INC, classified as a critical application item. Delivery is required within 132 days of the award, with the original required delivery date set for August 1, 2026, and the need ship date specified as April 21, 2026. The item is to be delivered FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require an Engineering Change Proposal or Request for Variance, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA) at a unit price of $50.00, totaling $2,500.00, and all shipments must be sent to the designated receiving warehouse in Tracy, California, with transportation details governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7L5-26-T-4735, with a response deadline of August 13, 2026, and the contract is managed under NAICS code 332996.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details