Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Multiple Leg Sling Fabrication (Critical Application)

Active

Federal

Response Deadline10/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of 167 multiple leg slings for prime contractors supporting DLA Troop Support ordnance handling projects. The work must be performed in accordance with TDP Rev A Gen 1 and Basic Drawing 53711 7516578, with strict adherence to MIL-STD-130N for identification marking and RP0001 for packaging. Due to the critical nature of the application, the use of mercury-free materials is mandatory. The project is a total small business set-aside under NAICS code 314994 and is managed by the Department of Defense. To be eligible, the contractor must maintain JCP Certification, CMMC Level 2, and full ITAR/EAR compliance. Performance of the contract will take place in New Cumberland, Pennsylvania.

General Info

Fabricate 167 multiple leg slings for DLA projects in New Cumberland, Pennsylvania.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8EE-27-Q-0017.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLING, MULTIPLE LEG

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

subcontract

Response DeadlineOct 17

Submission deadline

Response Deadline

10/17/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates multiple leg slings for prime contractors on DLA Troop Support ordnance handling projects. Performs assembly per TDP Rev A Gen 1 and Basic Drawing 53711 7516578, including identification marking per MIL-STD-130N and packaging per RP0001. Requires JCP Certification, CMMC Level 2, and ITAR/EAR compliance. Utilizes mercury-free materials for critical application items. Delivers 167 completed and marked slings.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E9-27-Q-0038

Solicitation SPE8E9-27-Q-0038 is a firm-fixed-price request for quotations issued by the Department of Defense, DLA Troop Support, Construction and Equipment MRO SVC I. The requirement is for the procurement of fibrous manila rope, specifically Type M, Class 2, with a 1-1/2 inch circumference and standard lay. The rope must be mildew resistant treated in accordance with T-T-616B and supplied in coils of 2,700 feet. The total quantity requested is 68 coils, divided into two line items of 28 and 40 coils, to be delivered to DLA Distribution centers in Tracy, California, and New Cumberland, Pennsylvania. Delivery is required within 60 days after order, with inspection and acceptance occurring at the destination. This acquisition is a total small business set-aside and mandates strict adherence to technical and quality requirements found in the DLA Master List. Packaging and palletization must comply with RP001 and MIL-STD-129, with a specific directive to avoid plastics for wrapping or cushioning whenever possible. Quality assurance involves sampling per MIL-STD-1916 or ASQ standards, and product verification may be satisfied via a Certificate of Conformance. The contract incorporates various FAR and DFARS clauses covering cybersecurity, child labor, and the Buy American program, and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SLING, MULTIPLE LEG

Solicitation # SPE8EE-27-Q-0017

Solicitation SPE8EE-27-Q-0017 is a total small business set-aside issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 167 multiple leg slings (NSN 3940-01-541-0894). Classified as a critical application item, the requirement includes the delivery of the slings and the performance of First Article Testing and Production Lot Testing. The contract specifies a delivery timeline of 700 days after order and requires the contractor to coordinate with the Naval Surface Warfare Center Indian Head Division Detachment Picatinny immediately upon award to obtain necessary serial numbers. The contractor must adhere to strict technical and quality standards, including basic drawing 53711 7516578, MIL-STD-130N for identification marking, and MIL-STD-129 for shipment and storage. Packaging must comply with RP0001 and PHST-177 5.1. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Additionally, the contractor must comply with CMMC Level 2 cybersecurity standards and ensure that no mercury is intentionally added to the hardware. Inspection and acceptance will occur at the source, and all invoicing must be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Fibrous Rope (NSN 4020014539398)This subcontract involves the supply of specialized fibrous rope for prime contractors working on DLA Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing rope that strictly adheres to NSN 4020014539398 and the DLA Master List of Technical and Quality Requirements. A total of 8 units are to be delivered to Randolph AFB in Texas. The contract mandates strict adherence to domestic sourcing regulations, specifically the Berry Amendment and the Buy American Act. Additionally, the provider must comply with DFARS 252.204-7012 standards to ensure the proper safeguarding of defense information. The opportunity is categorized under NAICS code 314994 and is managed through the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0127

Solicitation SPE8EE-27-T-0127 is issued by the Department of Defense, DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 8 units of fibrous rope under NSN 4020014539398. The requirement is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The original required delivery date is October 6, 2026, with a delivery window of 20 days after order. Inspection and acceptance will occur at the destination, specifically Randolph AFB, Texas. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements and RP001 for palletization take precedence. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing processes unless specifically authorized.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0126

Solicitation SPE8EE-27-T-0126 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of six units of fibrous cord. The required item is identified by NSN 4020012750258 and part number 30401 from L and R Manufacturing Company. The original required delivery date is May 19, 2026, with a delivery lead time of 20 days after order. Delivery is FOB Destination to the 0001 SF BN CO A GSB located at Fort Lewis, Washington. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted via the DIBBS portal by October 19, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CHAIN, STUD LINK

Solicitation # SPE4A5-27-T-0299

Solicitation SPE4A5-27-T-0299, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of two units of Stud Link Chain (NSN 4010016766463). This commercial off-the-shelf item is designated as a critical application item and must be delivered within 20 days after order. Delivery is FOB Origin, with both inspection and acceptance occurring at the origin. Shipping must be conducted via traceable means to the 2D Force Storage BN in Albany, Georgia, with parcel post strictly prohibited. The contractor must adhere to rigorous quality and technical standards, including the DLA Master List of Technical and Quality Requirements and sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and the use of Wide Area Workflow for invoicing. Offers produced using additive manufacturing are ineligible for award, while certified HUBZone small businesses may receive a price evaluation preference.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-27-Q-0016

Solicitation SPE8EE-27-Q-0016 is a firm-fixed-price request for quotations issued by DLA Troop Support for the procurement of one reel of fibrous rope, NSN 4020-00-106-9335. The required item must have a circumference size of 7.5 inches and be supplied in 600-foot reels, with multiple lengths per unit strictly prohibited. Technical compliance is governed by MIL-R-24337A and MIL-DTL-24337B, and the procurement is designated as a first-time buy. Delivery is required within 128 days after order to the USS Comstock LSD 45, with both inspection and acceptance occurring at the destination. Eligibility for award is restricted to manufacturers or distributors listed on the Qualified Suppliers List (QSLM/QSLD) for FSC 4020. The contractor must adhere to strict quality assurance standards, including QAP EQ003 and sampling methods per MIL-STD-1916 or ASQ H1331, and provide a Certificate of Quality Compliance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Fibrous Rope Manufacturer/Supplier (NSN 4020-01-524-8286)This subcontract involves the manufacture and supply of specialized fibrous rope matching NSN 4020-01-524-8286 for prime contractors supporting DLA Troop Support projects. The requirement specifies the delivery of 600 ft reels, with a total of two reels to be shipped FOB Origin to Mayport Naval Station, Florida, and Fort Hood, Texas. The supplier must ensure strict adherence to the Berry Amendment, the Buy American Act, and the Balance of Payments Program. Additionally, all materials must be packaged according to MIL-STD-2073-1E, marked per MIL-STD-129, and palletized in accordance with RP001 standards. This opportunity is managed under NAICS code 314994 for the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Type M Class 2 Fibrous Rope SupplyThis subcontract involves the supply of Type M Class 2 fibrous rope for prime contractors supporting DLA Troop Support contracts under the Department of Defense. The required product is a mildew-resistant rope with a 4-inch circumference and standard lay, featuring internal kraft paper twine or water repellent cotton tape markers. The specific delivery requirement consists of six coils of 900ft rope, accompanied by a Certificate of Conformance. Compliance with strict military standards is mandatory, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129. Additionally, the provider must maintain a QSLM/QSLD listing for FSC 4020. This opportunity falls under NAICS code 314994 and was posted by Construction & Equipment Manu & Con.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

in about 15 hours

Supplier of Pneumatic Tire Wheel Assemblies (NSN 2530-01-723-0184)This subcontract involves the supply of 21 pneumatic tire wheel assemblies for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. The finished assemblies must strictly adhere to NSN 2530-01-723-0184 and Hutchinson Industries PN AS-1609-080 specifications. All items must be packaged and marked according to MIL-STD-129 and RP001 standards, with final delivery designated as FOB Destination to Tracy, California. The agreement mandates strict adherence to the Buy American Act and requires the implementation of DFARS 252.204-7012 safeguarding protocols. This opportunity falls under NAICS code 314994 and is managed by the Department of Defense. Interested parties must respond by October 19, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

WIRE ROPE ASSEMBLY, SIN

Solicitation # SPE4A5-27-T-0164

Solicitation SPE4A5-27-T-0164, issued by the Defense Logistics Agency Weapons Support ASC Supplier Oper OEM Division, is for the procurement of two single leg wire rope assemblies with a 1.5 inch diameter, identified by NSN 4010-00-202-2427. The required delivery date is July 5, 2027, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS). The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, a price evaluation preference is available for certified HUBZone Small Business Concerns, and the submission of a Safety Data Sheet is mandatory for any hazardous materials to ensure award eligibility.

Defense Logistics Agency

POSTED

DEADLINE

SLING, MULTIPLE LEG

Solicitation # SPE8EE-27-Q-0013

Solicitation SPE8EE-27-Q-0013 is a firm fixed price request for the procurement of 46,000 multiple leg slings, identified by NSN 3940-01-449-4241. This effort is a total small business set-aside managed by the Department of Defense through DLA Troop Support. The contract requires adherence to Technical Data Package Rev A Gen 1 and specific Quality Assurance Provisions, including QAP 14153 SQAP-FAT3 and SQAP-PLT3. Delivery is set for 500 days after the date of order, with a specific schedule for First Article Testing that allows 90 days for unit delivery, 45 days for government testing, and 15 days for final approval. The contractor must comply with strict packaging and marking standards per MIL-STD-2073-IE and MIL-STD-129, with inspection and acceptance occurring at the point of origin. Key regulatory requirements include the Buy American and Balance of Payments Program, DFARS safeguarding of covered defense information, and strict export controls under ITAR and EAR. Additionally, the contract prohibits the intentional addition of mercury to hardware and requires the use of the Wide Area Workflow system for all invoicing and receiving reports. Award will be based on a best-value determination considering past performance, offered delivery, and price.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Destructive and Non-Destructive Testing (FAT/PLT)This subcontract opportunity involves performing First Article Testing and Production Lot Testing for prime contractors supporting DLA Troop Support ordnance handling projects. The scope of work focuses on conducting load and destructive testing on preproduction samples to ensure critical application safety standards are met, utilizing specialized high-capacity tension meters and load rigs. The successful contractor will be responsible for delivering certified test reports and must maintain JCP Certification to gain necessary access to Technical Data Packages. The project is designated as a Total Small Business Set-Aside under NAICS code 335999 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 17, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

High-Strength Sling Hardware and Textile SupplyThis subcontract opportunity, titled High-Strength Sling Hardware and Textile Supply, involves providing high-strength hardware and textiles for prime contractors working on DLA Troop Support ordnance handling projects. The scope of work includes the delivery of hooks, rings, and webbing in accordance with Basic Drawing 53711 7516578. A critical requirement is that all hardware must be mercury-free per NAVSEA 5100-003D, and the supplier must provide full material certifications and Mill Test Reports for all certified raw materials and hardware components. The project is designated as a Total Small Business Set-Aside under NAICS code 332510 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 17, 2026, to be considered for this supply contract.

Hardware Manufacturing

POSTED

DEADLINE

CARGO NET, TRAILER

Solicitation # SPE8EE-26-T-2704

Solicitation SPE8EE-26-T-2704 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment Manu and Con for the procurement of 12 trailer cargo nets, identified by NSN 3940-01-494-1543. The requirement is issued under the First Destination Transportation program with a need ship date of March 15, 2027, and an original required delivery date of August 10, 2027. Delivery is set as FOB Destination Other to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination based on FAR 52.246-1, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. The contract contains strict technical data export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Compliance with the Berry Amendment, Buy American Act, and other domestic material restrictions is mandatory. Packaging and palletization must adhere to RP001 and MIL-STD-129 standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. A price evaluation preference is available for SBA-certified HUBZone small business concerns.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Defense-Compliant Packaging and Shipping Services

Other Support Activities for Road Transportation

POSTED

DEADLINE

Manufacture and Supply of Sheaves and Flag Fairlead (NSN 3940-01-644-2941)

POSTED

DEADLINE

Defense-Compliant Packaging and Freight ServicesThe Defense-Compliant Packaging and Freight Services subcontract involves providing specialized military-grade packaging and transportation for prime contractors supporting DLA Troop Support procurement projects. The scope of work requires the packaging of rope in accordance with ASTM D3951, marking and labeling per MIL-STD-129 using compliant equipment, and palletization following RP001 standards. The contractor is responsible for managing First Destination Transportation logistics to ensure the secure delivery of materials to Randolph AFB, Texas. This effort is categorized under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

DEADLINE

Defense-Compliant Packaging and Shipping Services

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Fabrication of Technical Sheet (NSN 7610-01-682-7610)

Sheet Metal Work Manufacturing

POSTED

DEADLINE

SHEET, TECHNICAL

Solicitation # SPE8EE-27-T-0128

Solicitation SPE8EE-27-T-0128 is a request for one Technical Sheet (NSN 7610-01-682-7610) issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office. The requirement is fully competitive and based on military and federal specifications, specifically referencing Technical Data Package Rev A Gen 1 and Basic Drawing 18876 13675054. Delivery is required within 20 days after order (ADO) with shipping terms set as FOB Origin, destined for Worcester, Massachusetts. Inspection and acceptance will occur at the destination per FAR 52.246-1. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331, requiring zero non-conformances if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Key compliance requirements include CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS