N00019-16-G-0005 H53 In Support of CJ&A

INTRODUCTION The Naval Air Systems Command (NAVAIR), in support of PMA-261 H-53 Heavy Lift Helicopter Program Office, intends to solicit and negotiate with only one source, under the authority of FAR 6.302-1 - Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements, for the following efforts: The T64-416/416A/419 engines and the T408-GE-400 engines. NAVAIR intends to negotiate these sole source efforts under Basic Ordering Agreement (BOA) N00019-16-G-0005. PLACE OF PERFORMANCE Place of Performance Percentage of Effort Government (On-Site) Contractor (Off-Site) Lynn, MA 100% 0% 100% THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible businesses capable of providing the supplies/services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this announcement. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND General Electric (GE) T64-GE-416/416A/419 turboshaft engines have powered U.S. Navy and Marine Corps' H-53 Heavy Lift Helicopters since 1964. Since in the mid-1980's, the T64 has suffered from a lack of sustained investments which has led to component aging (tired iron), component obsolescence, and excessive parts reuse/rework. These issues, in turn, have resulted in a steady decrease in engine reliability, resulting in higher demand for T64 rework, overhaul, and procurement of new engines to maintain the fleet's readiness posture. The GE T408-GE-400 turboshaft engine was designed and developed from the T64 engine and other GE engines (T700/CT7, GE27, T407, and CFE-738) to power the U.S. Marine Corps' CH-53K Heavy Lift Helicopter. The T408 uses increased compressor efficiency, erosion resistant coatings, increased airflow, higher turbine temperatures and efficiency, and design techniques to achieve the increased shaft horse power necessary to meet the increased tactical range, payload, and survivability of the CH-53K Helicopter. ELIGIBILITY The applicable NAICS code for this requirement is 336412 with a Small Business Size Standard of 1,000. The Product Service Code (PSC) is 2850. ANTICPATED PERIOD OF PERFORMANCE Assume an earliest contract award date of January 2019 and expiration date of December 2023. ANTICIPATED CONTRACT TYPE Fixed-price and cost-reimbursement contract types are anticipated. REQUIRED CAPABILITIES The H-53 Air Vehicle is a three (3) engine aircraft, which the US Navy and Marine Corps will employ to transport cargo, equipment and troops, and in amphibious assault and subsequent operations ashore. The H-53 Air Vehicle will operate at distances, airspeeds, and gross weights that support Expeditionary Maneuver Warfare (EMW), Operational Maneuver from the Sea (OMFTS), and Sea basing concepts. When equipped with approved kits, the helicopter may be used for vertical on-board delivery of cargo and equipment from ship-to-ship, ship-to-shore, and shore-to-ship. The helicopter will be equipped to be operationally compatible with the LHA, LHD, LHA(R)), air capable ships, and CV/CVN vessels. H-53 engines must meet or exceed minimum key performance criteria as established by the engine specification for each configuration. Additionally, the anticipated efforts will include, but not limited to, studies, design, non-recurring engineering, prototype and testing of improved systems, engineering change proposals and modification/installation/production kits. SUBMISSION INFORMATION It is requested that interested businesses submit to the contracting office a brief capabilities statement package (no more than 10 pages in length, single spaced, 12-point font minimum) demonstrating ability to perform the service listed under the required capabilities. This documentation must address at a minimum the following: - 1. Company Name; Company Address; Company Business Size, and Point-of-Contact (POC) name, phone number, fax number, and e-mail address. - 2. Company profile to include number of employees, annual revenue history, office location(s), DUNS number, and a statement regarding current small/large business status; - 3. Prior/current corporate experience performing efforts of similar size and scope within the last three years, including contract values, Government point of contract with current telephone number, and a brief description of how the referenced contract related to the services described herein; - 4. Management approach to staffing this effort with qualified personnel; - 5. Statement regarding capability to obtain the required industrial security clearances for personnel; - 6. Company's ability to begin performance upon contract award. - 7. What type of work has your company performed in the past in support of the same or similar requirement? - 8. Can or has your company managed a task of this nature? If so, please provide details. - 9. Can or has your company managed a team of subcontractors before? If so, please cite contracts and teaming arrangement. - 10. What specific technical skills does your company possess which ensures capability to perform the tasks? - 11. If you are a small business, provide an explanation of your company's ability to perform at least 50% of the tasking described in required capabilities. - 12. Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office location, CAGE code, DUNS number, etc. - 13. Respondents to this notice must also indicate whether they are a large business or qualify as a Small, Small Disadvantaged, Small Disadvantaged Veteran Owned Small Business Women-Owned, 8(a), Hub Zone or Service Disabled Veteran-Owned Small Business Concern. - 14. Include in your response your ability to meet the requirements in the Facility and Safeguarding requirements. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted via email to the Contract Specialist, Randal Bradum at randal.e.bradum@navy.mil and the PCO, Brittany Reynolds at brittany.s.reynolds2@navy.mil, in either Microsoft Word or Portable Document Format (PDF). The deadline for response to this request is 4:00 p.m., Eastern Standard Time, 3 December 2018. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Information and materials submitted in response to this request WILL NOT be returned. Classified material SHALL NOT be submitted. No phone calls will be accepted. All questions must be submitted via e-mail. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to these Sources Sought.