Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

N00164-24-RFPREQ-CR-WXS-0130

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of the Navy, through Navair, has issued a forecast for the Next Generation Electronic Attack Unit Full Rate Production. This procurement effort falls under NAICS code 334511 and is focused on the large-scale manufacturing of electronic attack capabilities. The performance for this contract is designated to take place in Minneapolis, Minnesota. This initiative represents a critical step in transitioning the electronic attack unit from development into full rate production to support naval operations.

General Info

Navair forecast for Next Generation Electronic Attack Unit full rate production in Minneapolis.

Agency

Department Of The Navy → Navair

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

MINNEAPOLIS, MN, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navair

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navair

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Next Generation Electronic Attack Unit (NGEAU) Full Rate Production (FRP)

Similar Contracts

Same NAICS industry code

WET WALL CYCLONE

Solicitation # SPE7M1-27-T-0243

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

SENSOR HEAD, MINE DETEC

Solicitation # SPE7M1-27-T-0239

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture of Optoelectronic Display (NIIN: 015626905)This subcontract involves the manufacture of Optoelectronic Display assemblies (NIIN: 015626905) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must fabricate units in strict accordance with TDP Version O07 and ensure all physical identification and marking comply with MIL-STD-130, REV N. Additionally, the contractor is responsible for coordinating Government source inspections to verify quality and compliance. Operational requirements include the possession of specialized optoelectronic assembly equipment and strict adherence to OSHA and FED STD 313 standards for the handling of hazardous materials. This opportunity falls under NAICS code 334511, with a response deadline set for October 22, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Nanopositioner Control System and Rack SupplyThis subcontract for the Nanopositioner Control System and Rack Supply involves the provision of electronic control racks and interfaces for prime contractors working on Department of Energy projects at Argonne National Laboratory. The scope of work includes the delivery of complete AMC300 Control Racks, DS4 remote controllers, and specific AMCC interface cables, along with necessary Ethernet cables and USB2ethernet adapters. Performance will take place in Lemont, Illinois, under NAICS code 334511. The contractor is required to strictly adhere to laboratory safety standards and the ANL-71COM counterfeit parts prevention guidelines to ensure the integrity and safety of the supplied hardware.

Argonne National Labor - DOE Contractor

POSTED

about 14 hours ago

DEADLINE

Supply of Analog I O Module, A (NSN 7RH 6130-01-589-2473 P8)This subcontract involves the supply of Analog I O Module, A, part number 73030 1709965A, for prime contractors supporting DLA Aviation supply contracts. The selected provider is responsible for manufacturing or sourcing this Critical Application Item in strict accordance with ISO 9001 standards. All deliverables must be shipped FOB Destination and comply with Buy American program requirements. Rigorous packaging and handling standards are mandated, including adherence to MIL-STD-2073 and MIL-STD-129, with specific ESD protection as defined by ANSI/ESD S20.2020. The contract is managed under NAICS code 334511 for the Department of Defense via the DLA Aviation office in Philadelphia, with a response deadline set for October 23, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 14 hours ago

DEADLINE

AN/BYG-1 Applications Re-Architecture

Solicitation # N0002426R6222

Solicitation N0002426R6222, issued by the Naval Sea Systems Command (Navsea HQ), seeks a contractor for the AN/BYG-1 Applications Re-Architecture. This effort involves the re-architecting of applications associated with the AN/BYG-1 system. The solicitation was posted on October 7, 2026, with a response deadline of November 5, 2026. The primary point of contact for the effort is Michael Ravnitzky, with Matthew C. Hedrick serving as the Contracting Officer. Due to the sensitive nature of the work, strict security and data handling requirements are in place. Offerors must possess a SECRET security clearance and provide a verified DD Form 2345 Military Critical Technical Data Agreement and a signed Terms of Use Agreement to access Government Furnished Information, source code, and technical documents. All data must be handled in accordance with NISPOM standards, and the transmission of information to foreign nationals or outside the United States is prohibited without a valid export license. Furthermore, the use of public cloud repositories or external AI tools for processing technical data is strictly forbidden. Contractors are required to destroy all provided data within 180 days of the RFP closing and maintain destruction records for five years.

POSTED

about 14 hours ago

DEADLINE

Request for Information (RFI)

Solicitation # W912P627QA001

W072 Endist Chicago

POSTED

about 14 hours ago

DEADLINE

66--INERTIAL MEASURING, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RUC39

Solicitation N0010426RUC39 is a request for proposals issued by NAVSUP Weapon Systems Support Mechanicsburg for the repair of Inertial Measuring units. The government is seeking a single award based on a firm-fixed price (FFP) model, with the evaluation prioritizing past performance over price for technically acceptable offerors. The scope of work requires the contractor to perform all repairs, inspections, and testing in accordance with original manufacturer specifications and standard overhaul practices. Key requirements include adherence to MIL-STD-130 for physical identification, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. The government requests a Repair Turnaround Time (RTAT) of 192 days after receipt of assets, with a potential price reduction penalty for inexcusable contractor delays. Assets are to be managed via the Commercial Asset Visibility (CAV) system, and the induction period expires 365 days after the contract award date. The solicitation includes a prospective option for the government to unilaterally increase the order quantity by up to 100 percent within one year. Proposals must be submitted electronically to the designated contracting officer by November 6, 2026, and must include detailed pricing for repairs, new units, and test and evaluation fees for items determined to be beyond economical repair.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

66--ALTIMETER,ENCODING, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB22

Solicitation N0038326QBB22, issued by NAVSUP Weapon Systems Support on October 7, 2026, is a competitive request for quotation for the teardown, evaluation, repair, and modification of Encoding Altimeters, part number 7RH 6610 01 259 0251, NSN 6610-01-259-0251. The objective is to return these units to a Ready For Issue condition through comprehensive inspection, component replacement, and testing. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Key technical constraints include a prohibition on the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead, and a requirement for personnel to be certified to IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Evaluation will include risk assessments from the Supplier Performance Risk System regarding item, price, and supplier performance. Awarded contractors must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Deliveries are required within 90 days, FOB Destination, with a warranty period of one year after the issuance of the award. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Specific protocols are established for items determined to be Beyond Economical Repair, defined as repair costs exceeding 75 percent of the replacement price, and for items Missing on Induction, both of which require written concurrence from DCMA. Packaging and marking must strictly adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and Item Unique Identification. Compliance with Buy American and Balance of Payments programs, as well as DFARS cybersecurity standards for safeguarding covered defense information, is mandatory.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

operational handheld explosive and drug detection systems

Solicitation # 80NSSC26944182Q

Solicitation 80NSSC26944182Q is a small business set-aside request for quotation issued by the NASA Shared Services Center for the procurement, delivery, and support of two DetectaChem SEEKER Pro-Full handheld explosive and drug detection systems. These systems are intended for the NASA Glenn Research Center Office of Protective Services and must utilize Spectrum Matrix Analysis technology, be compatible with the ApexR7 Raman Spectrometer, and feature a startup time of less than 30 seconds. Technical requirements specify that the devices must be IP66 water-resistant and meet MIL-STD-810H ruggedization standards. The contractor is responsible for providing the hardware, accessories, 20 test cards, technical documentation, and a minimum one-year manufacturer warranty. The contract is a firm-fixed-price agreement with a delivery timeline of 30 days from procurement, shipped FOB Destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, where offers are evaluated first for technical acceptability and then by price. Quotes must be submitted via email to McKenzie Hanson by October 14, 2026, at 3:00 p.m. CT. Offerors must be registered in the System for Award Management and provide two points of contact within their submission. All deliverables must undergo government inspection and acceptance to verify operational readiness and baseline configuration.

NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

Export Variant (XV) Second Generation Forward Looking Infrared (2GF) Thermal Receiver Units (TRUs) and Imager Assemblies Repair

Solicitation # W909MY27R2GFT

W6QK Acc-Apg Cont Ct Wash Ofc

POSTED

about 14 hours ago

DEADLINE

Laser Alignment System Supplier/IntegratorThis subcontract opportunity is for a Laser Alignment System Supplier and Integrator to support prime contractors on equipment procurements for British Columbia Ferry Services Inc. The selected provider will be responsible for the supply, installation, and calibration of laser alignment sensors, mounting hardware, and calibration software. The primary objective is to ensure high levels of cutting precision and machine accuracy for CNC tables, delivering fully integrated and calibrated systems. The procurement is managed under the Province of British Columbia with a response deadline of November 3, 2026. Falling under NAICS code 334511, the contract focuses on the technical delivery of precision alignment systems to meet strict operational standards for the agency's equipment.

British Columbia Ferry Services Inc

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navair

Same awarding agency

EBAD CAD PAD Requirements

Solicitation # N00421-26-RFPREQ-WPM202-03XX

Explosives Manufacturing

POSTED

DEADLINE

N00164-26-RFPREQ-CR-WXS-0040The Department of the Navy, specifically Navair, has issued a forecast for a Power Supply Upgrade Contract under the identification N00164-26-RFPREQ-CR-WXS-0040. Posted on July 2, 2026, this requirement falls under the NAICS code 335999, which covers all other miscellaneous electrical equipment and components manufacturing. This procurement action is currently categorized as a forecast, indicating the government's intent to solicit these services or supplies in the future. Interested parties can find further information through the Secretary of the Navy's small business portal.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

N00164-25-RFPREQ-CR-JXW-0196This forecast, identified as N00164-25-RFPREQ-CR-JXW-0196, concerns the organic depot capability and activation for MQ-4C Flight Controls and Electrical Systems. The project is managed by Navair under the Department of the Navy and is focused on establishing necessary maintenance and support infrastructure at the Fleet Readiness Center Southeast. The initiative aims to integrate specialized technical capabilities to sustain the flight control and electrical systems of the MQ-4C aircraft. As a forecast notification, this indicates the government's intent to pursue these requirements to ensure long-term operational readiness and organic support for the platform.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

N00164-25-RFPREQ-CR-WXS-0421The Department of the Navy, specifically Navair, has issued a forecast for the CAES San Diego Integrated Microwave Assemblies and Repairs contract. This requirement focuses on the procurement and maintenance of integrated microwave assemblies, with the place of performance located in San Diego, California. The project is categorized under NAICS code 334511, which pertains to the manufacturing of microwave and radio frequency equipment. This forecast serves as a notification of upcoming needs for specialized microwave assembly services and repairs to support naval operations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N00164-25-RFPREQ-CR-JXW-0089The Department of the Navy, specifically Navair, has issued a forecast for a contract titled Boeing Basic for Spares, Repairs and Engineering Services. This procurement effort is designed to secure essential maintenance support, replacement parts, and technical engineering expertise to sustain operational readiness. The performance of these services will take place across multiple locations. While specific solicitation numbers and set-aside details are not currently listed, the forecast serves as a notification of the government's intent to acquire these critical aviation support services.

Engineering Services

POSTED

DEADLINE

N00164-24-RFPREQ-CR-JXN-0008The Cable and Harness MAC Follow-On is a forecast opportunity issued by the Department of the Navy under the Navair agency. This requirement is designated as a Total Small Business Set-Aside in accordance with FAR 19.5, targeting vendors under the NAICS code 334418. The contract is intended for performance across multiple locations. Interested parties can find further information through the Secretary of the Navy small business portal, with the official posting dated July 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

N00164-24-RFPREQ-CR-JXW-0041The Department of the Navy, specifically Navair, has issued a forecast for a contract regarding general micro systems spares, repairs, and engineering services. This requirement is categorized under NAICS code 334511 and is intended to support technical operations and maintenance. The performance of these services is expected to take place in California. Interested parties can find further information through the Secretary of the Navy's small business portal.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N00164-26-RFPREQ-CR-WXS-0041The Department of the Navy, through Navair, is forecasting a requirement for Fleet Service Representative support for Airborne Electronic Attack systems. This contract involves providing technical expertise and maintenance support for AEA systems across both CONUS and OCONUS locations to ensure operational readiness and system performance. Classified under NAICS code 334511, the effort focuses on specialized electronic assembly and system support. The procurement is currently in the forecast stage, indicating a future need for qualified contractors to provide on-site representative services to support naval aviation electronic warfare capabilities.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N00164-23-RFPREQ-CR-WXS-0066The Department of the Navy, through Navair, has issued a forecast for the off-site depot repairs of Airborne Electronic Attack weapon systems. This requirement falls under NAICS code 334511 and is focused on maintaining and repairing critical electronic attack capabilities outside of primary depot facilities to ensure operational readiness. The procurement is identified by the reference number N00164-23-RFPREQ-CR-WXS-0066 and was posted on July 2, 2026. Interested parties can find further information regarding small business opportunities and naval aviation requirements through the Secretary of the Navy's small business portal.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N00164-25-RFPREQ-CR-JXW-0091The Department of the Navy, specifically Navair, has issued a forecast for contract N00164-25-RFPREQ-CR-JXW-0091 titled CPI Radant for Spares, Repairs and Engineering Services. This procurement is intended to secure essential spare parts, repair services, and specialized engineering support to maintain operational readiness. The performance of these services is slated to take place in Massachusetts. While specific set-aside details and NAICS codes are not currently listed, the opportunity was officially posted on July 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

N00164-27-RFPREQ-CR-WXS-0003The Department of the Navy, specifically Navair, has issued a forecast for the Interference Cancellation System (INCANS) Repair Contract under solicitation number N00164-27-RFPREQ-CR-WXS-0003. Posted on July 2, 2026, this requirement is categorized under NAICS code 811210, which pertains to commercial and industrial machinery and equipment repair and maintenance. This procurement action focuses on the specialized repair and maintenance of interference cancellation systems to ensure operational readiness. Interested parties can find further information through the Secretary of the Navy small business portal.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

N00164-26-RFPREQ-CR-JXW-0002The Department of the Navy, specifically Navair, has issued a forecast for contract N00164-26-RFPREQ-CR-JXW-0002 regarding repair, maintenance, and engineering support for PMA-290. This requirement serves as a follow-on to contract 23GJW51 and is intended to ensure continued technical and operational support for the program. The performance of this contract will take place in Crane, Indiana. The forecast was officially posted on July 2, 2026, to notify potential contractors of the upcoming procurement needs for these specialized engineering and maintenance services.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS