Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

N00164-26-RFPREQ-CR-JXW-0038

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract action, identified as N00164-26-RFPREQ-CR-JXW-0038, is issued by the Department of the Navy under the Strategic Systems Programs. The primary objective of the requirement is to adapt existing land-based sensing technologies for use in subsurface base applications to support the SENSEI program. The project is categorized under NAICS code 334511, focusing on the manufacturing of radiotelemetry and telemetry measuring devices. While currently listed as a forecast, the place of performance is designated as Washington.

General Info

Navy contract to adapt land-based sensing technologies for subsurface SENSEI program applications.

Agency

Department Of The Navy → Ssp

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

Washington, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Ssp

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Ssp

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Contract action to adapt land-based sensing to subsurface base application in support of SENSEI.

Similar Contracts

Same NAICS industry code

Automated Traffic Enforcement Trailer

Solicitation # W911S226U4411

Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.

W6QM Micc-Ft Drum

POSTED

about 3 hours ago

DEADLINE

66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB18

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

58--THERMAL IMAGING SYS

Solicitation # N0010426RQA81

Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm fixed price negotiated procurement for the manufacture of Thermal Imaging Systems under NSN 5855-01-499-1240. The government is seeking a single award based on the most advantageous offer, with past performance weighted as more important than price. The evaluation process utilizes the DoD Supplier Performance Risk System for quality ratings, and the government reserves the right to award to other than the lowest priced offer. Proposals must be submitted via NECO or email, and the current requested delivery date is 180 days after award. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with Buy American and Balance of Payments program certificates, and adherence to cybersecurity standards for covered defense information. Offerors must be authorized distributors of the original manufacturer to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB19

Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RQA79

Solicitation N0010426RQA79, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted negotiated request for proposal for the teardown, evaluation, repair, and modification of 41 Thermal Imaging Systems (NSN 5855-01-499-1240). The government contemplates the award of a firm-fixed-price contract with a requested delivery date of 180 days after award. All repair work must adhere to contractor standard practices and approved technical directives, with physical identification required per MIL-STD-130 and packaging conducted according to MIL-STD-2073. The contractor is responsible for all inspection and testing at the point of origin, maintaining records for 365 days post-delivery. Any critical or major design or material variances must be submitted via DCMA or SUSHPIP and approved through a formal contract modification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be authorized distributors of the original manufacturer and comply with various federal and defense acquisition regulations, including cybersecurity requirements for covered defense information and Buy American certifications.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.

Dalton Utilities

POSTED

about 18 hours ago

DEADLINE

Searchlight Unit Supplier (NSN 6230123124633)This subcontract involves the supply of three specialized searchlight units for prime contractors delivering to the Defense Logistics Agency. The hardware must strictly adhere to NSN 6230123124633 and the DLA Master List of Technical and Quality Requirements RA001. A critical manufacturing constraint is that the parts must not be produced using additive manufacturing processes. Eligible suppliers are required to maintain a valid UEI and CAGE code. The project falls under NAICS code 334511 and is associated with the Department of Defense. The response deadline for this requirement is November 9, 2026, with the place of performance located at FPO 09573.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Supply of Display Units (NSN 7025-01-686-3479)This HUBZone set-aside subcontract involves the procurement of 21 new, unused, and non-refurbished display units under NSN 7025-01-686-3479 for prime contractors supporting DLA Troop Support. The Department of Defense requires genuine OEM materials sourced through authorized distributors, with a strict prohibition against the use of additive manufacturing for production. Deliverables must be shipped FOB Origin to Tracy, California, and must adhere to specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. The opportunity is categorized under NAICS code 334511, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

Electrical Sub-Assembly and IntegrationThis subcontract for Electrical Sub-Assembly and Integration involves the supply and integration of electrical components for prime contractors supporting DLA aviation lighting projects. The scope of work includes soldering, wiring harness assembly, and the installation of light sources and lenses into housings in strict accordance with Reference Drawing 78286 SS3995. The final deliverables are fully wired and assembled light units that must comply with MIL-STD-129 standards for marking and labeling. Managed by the Department of Defense through the Jacksonville Building, the project falls under NAICS code 334511 and will be performed in Jacksonville, Florida. Interested parties must note the response deadline of November 9, 2026, for this specific procurement effort.

JACKSONVILLE BLDG

POSTED

about 22 hours ago

DEADLINE

Supply of Navigational Lights (NSN 6220-01-568-5419)This subcontract involves the manufacture or sourcing of three navigational light assemblies, identified by NSN 6220-01-568-5419, to support prime contractors fulfilling DLA supply contracts. The project falls under NAICS code 334511 and is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. The contractor is responsible for ensuring all units are packaged and labeled according to strict military and industry standards, including ASTM D3951 for non-hazardous materials, TQ Requirement IP025 and FED-STD-313 for hazardous materials, and MIL-STD-129 for shipment labeling. Additionally, the provider must maintain full compliance with the Buy American Act to successfully deliver the three required units.

DLA DIST SAN JOAQUIN

POSTED

about 22 hours ago

DEADLINE

Aircraft Landing Light Supplier (NSN 6220016458829)This subcontract through Depot Hill for the Department of Defense requires the manufacture or sourcing of four aircraft landing light assemblies under NSN 6220016458829. The supplier is responsible for ensuring all units meet strict aviation lighting quality control standards and adhere to packaging requirements specified by MIL-STD-129 and the DLA Master List. Performance will take place at Hill AFB. To be eligible, contractors must provide a CMMC Level 2 Self-Assessment and maintain full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 9, 2026.

POSTED

about 22 hours ago

DEADLINE

Supply of Display Units (NSN 7025016587076)This subcontract involves the manufacture or procurement of two Display Units meeting the specifications of NSN 7025016587076 for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the production, packaging, and coordination of shipment via the First Destination Transportation program, with final delivery to DLA Dist San Joaquin in Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334511 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, to fulfill the requirements for this specific hardware supply contract.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of The Navy → Ssp

Same awarding agency

N00164-26-RFPREQ-CR-GXP-0012This contract is a forecast for non-personal engineering, technical, logistical, and program management support services to benefit the Metrology and Calibration Branch of the Strategic Systems Guidance, Navigation and Control Division at the Naval Surface Warfare Center, Crane Division. Serving as a follow-on to Seaport Task Order N0016423F3007, the requirement is managed by the Department of the Navy under the agency SSP. The opportunity is designated as a total small business set-aside under NAICS code 541330. Performance for these services is expected to take place in Yorktown, Virginia. The forecast was posted on July 2, 2026, under the reference number N00164-26-RFPREQ-CR-GXP-0012.

Engineering Services

POSTED

DEADLINE

N00164-27-RFPREQ-CR-GXW-0013The Department of the Navy, specifically the SSP agency, has issued a forecast for contract N00164-27-RFPREQ-CR-GXW-0013 regarding the HVAC Refresh for IFTE - Lockhart. This project focuses on the comprehensive refreshing of the existing HVAC system to ensure operational efficiency and environmental control. The requirement is categorized under NAICS code 238220, which pertains to central heating air conditioning and refrigeration contractors. The forecast was posted on July 2, 2026, and serves as a preliminary notification for potential contractors interested in providing these specialized mechanical services.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

N00164-27-RFPREQ-CR-GXP-0004This forecast is for a total small business set-aside contract under NAICS code 541330, providing non-personal professional services to the Department of the Navy. The scope of work involves engineering, technical, logistics, configuration management, data management, and program management support for the NSWC Crane Strategic Systems Guidance, Navigation and Control Division, Code GXP. This requirement serves as a follow-on to Seaport Task Order N0016421F3017. The performance of these services is designated for Springfield, Virginia. The opportunity is managed by the Strategic Systems Programs agency and was posted on July 2, 2026, under the reference number N00164-27-RFPREQ-CR-GXP-0004.

Engineering Services

POSTED

DEADLINE

N00164-26-RFPREQ-CR-GXT-0001This forecast outlines a requirement for non-personal professional services to support the Strategic Missions Systems Engineering Division at NSWC Crane. The scope of work encompasses a broad range of technical disciplines, including engineering, logistics, configuration management, data management, and program management support. This effort serves as a follow-on to Seaport Task Order N0016422F3002. The contract is being issued by the Department of the Navy under the SSP agency, with the primary place of performance located in Reston, Virginia. Classified under NAICS code 541330, the requirement is identified by the reference number N00164-26-RFPREQ-CR-GXT-0001 and was posted on July 2, 2026.

Engineering Services

POSTED

DEADLINE

N00164-26-RFPREQ-CR-GXM-0003The Department of the Navy, specifically the SSP, has issued a forecast for a Combined Environment Testing IDIQ contract under the identification N00164-26-RFPREQ-CR-GXM-0003. This procurement is categorized under NAICS code 541380, indicating a focus on technical testing and evaluation services. The opportunity was posted on July 2, 2026, and is intended to establish an indefinite delivery, indefinite quantity framework for environmental testing requirements. Further details regarding set-asides and specific performance locations are not currently specified in the forecast.

Testing Laboratories and Services

POSTED

DEADLINE

N00164-25-RFPREQ-CR-GXT-0010The Department of the Navy, specifically the Strategic Missions Systems Engineering Division, is forecasting a SeaPort contract for the SP2012 Strategic Weapons System Ashore and Shipyard Installation Test Program support services. This effort serves as a follow-on to Task Order N0016420F3017 and is categorized under NAICS code 541330. The contract is managed by the SSP agency and will be performed in Washington, DC. This procurement is intended to provide essential technical and program support to ensure the continued functionality and testing of strategic weapons systems across both ashore and shipyard environments.

Engineering Services

POSTED

DEADLINE

N00164-27-RFPREQ-CR-GXP-0006The Department of the Navy's Strategic Systems Programs is forecasting an acquisition for Sonar Dome Rubber Windows and Sonar Composite Domes. This requirement encompasses the procurement of hardware along with essential support services, including installation, repair, engineering technical assistance, and field services. This effort serves as a follow-on to contract N0016420DGP57. The project is categorized under NAICS code 326291 and is expected to be performed in Jacksonville, Florida. Interested parties can find further information through the Secretary of the Navy's small business portal.

Rubber Product Manufacturing for Mechanical Use

POSTED

DEADLINE

N00164-25-RFPREQ-CR-GXW-0204The Department of the Navy, specifically the SSP, is forecasting a new Other Transaction Authority project for the design, development, and production of a Multi Mission Trailer. This initiative falls under NAICS code 336212, focusing on the creation of specialized trailers capable of supporting diverse operational requirements. The project is currently listed as a forecast with a posted date of July 2, 2026. Interested parties can find further information through the Secretary of the Navy's small business portal.

Truck Trailer Manufacturing

POSTED

DEADLINE

N00164-27-RFPREQ-CR-GXP-0002The Department of the Navy, specifically the SSP agency, is forecasting a requirement for the procurement of TR-333 Hydrophone Syntactic Discs. This action serves as a follow-on to contract N0016422DGP71 and is categorized under NAICS code 334511. The anticipated procurement is associated with solicitation number N00164-27-RFPREQ-CR-GXP-0002 and was posted on July 2, 2026. The designated place of performance for this contract is located in Canton, Massachusetts.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

N00164-28-RFPREQ-CR-GXP-0008The Department of the Navy, specifically the SSP agency, is forecasting a requirement for the procurement of TR-343 Transducer Band Clamps. This action serves as a follow-on to contract N0016423DGP74 and is categorized under NAICS code 332722. The anticipated performance for this contract will take place in Denver, Colorado. The opportunity was posted on July 2, 2026, under the reference number N00164-28-RFPREQ-CR-GXP-0008.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

N00164-25-RFPREQ-CR-GXW-0248The Department of the Navy, specifically the SSP, is forecasting a new Other Transaction Authority project titled Phased Launch Test Demonstration (PLTD). This initiative is categorized under NAICS code 928110 and is intended to support specialized testing and demonstration efforts. The project was posted on July 2, 2026, as a forecast to notify potential industry partners of the upcoming requirement. Further details regarding the solicitation and specific performance locations are expected to be released through the Secretary of the Navy's small business portal.

National Security

POSTED

DEADLINE

N00164-27-RFPREQ-CR-GXW-0012The Department of the Navy, specifically the SSP agency, has issued a forecast for the Gen Set Refresh - IFTE - Lockhart project under contract number N00164-27-RFPREQ-CR-GXW-0012. This requirement is categorized under NAICS code 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance. The opportunity was posted on July 2, 2026, and serves as a notification of upcoming needs for generator set refreshing services. Interested parties can find further information through the Secretary of the Navy small business portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

N00164-25-RFPREQ-CR-WXP-0058

Department Of The Navy

POSTED

DEADLINE

N00164-25-RFPREQ-CR-WXP-0558

Department Of The Navy

POSTED

DEADLINE

N00164-26-RFPREQ-CR-JXW-0033

POSTED

DEADLINE

FY25 - 0255 - IWS 2 - SEWIP Block 2 FRP extension (C)

IWS-2.0 - IWS-2.0 - Navsea

POSTED

DEADLINE

15 - DT-700C Hydrophone Production Contract

POSTED

DEADLINE

FY27 IWS6 NAV AN/WSN-12 FRP ISM/NPM Combined (C)

IWS-6.0 - IWS-6.0 - Navsea

POSTED

DEADLINE

N00164-25-RFPREQ-CR-WXP-0061

Department Of The Navy

POSTED

DEADLINE

STANDARD RANGE SENTRY TOWERS

Cjtf-Horn Of Africa (hoa)

POSTED

DEADLINE

MK 54 MOD 2 Low Rate Initial Production

PMS-404 - PMS-404 - Navsea

POSTED

DEADLINE

MK 48 MOD 8 Guidance and Control

PMS-404 - PMS-404 - Navsea

POSTED

DEADLINE

N00164-25-RFPREQ-CR-WXP-0275

Department Of The Navy

POSTED

DEADLINE

N00164-26-RFPREQ-CR-WXR-0041

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS