Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Nafion 1110

Active
41-0293Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center Philadelphia Division plans to procure six rolls of Nafion 1110 totaling 118.20 square meters through a sole-source procurement from Proton Energy Systems Inc. / Nel Hydrogen US, under the authority of FAR 6.302, as the item is a specific part-numbered product available only from this single supplier. This action is not subject to competition and is justified by the unique characteristics of the material required for government use. The solicitation number is 41-0293, with a posted date of August 4, 2026, and a response deadline of August 19, 2026, at 4:00 PM. The place of performance is in Philadelphia, Pennsylvania, with the contract being managed by the Department of Defense through the NSWC Philadelphia Division office located at 19112-1403. All inquiries must be submitted via email to joseph.w.aprile2.civ@us.navy.mil; phone calls will not be accepted. The NAICS code for this procurement is 333998, and there is no set-aside designation. Point of contact for this opportunity is Joseph Aprile, who can be reached by email or phone at 267-965-1737. The procurement is categorized as a special notice, and the official details can be accessed through the SAM.gov link provided.

General Info

Navy to sole-source procure six Nafion 1110 rolls from Nel Hydrogen US for Philadelphia performance.

Agency

Department Of Defense → Nswc Philadelphia DivisionView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Philadelphia Division
Contacts1 person available
OfficePHILADELPHIA, PA, 19112-1403, USA
Organization / Agency
Department Of Defense → Nswc Philadelphia Division
View Agency Profile
Office AddressPHILADELPHIA, PA, 19112-1403, USA

Full Description

Show more

The Naval Surface Warfare Center Philadelphia Division inteds to procure six (6) rolls (118.20 square meters) of Nafion 1110 on a sole source to Proton Energy Systems, Inc/ Nel Hydrogen US.


The proposed action is for part-numbered items for which the Government intends to solicit and award to only one source under the authority of FAR 6.302


Any questions regarding this notice should be e-mailed to:


joseph.w.aprile2.civ@us.navy.mil


Phone Calls will NOT be accepted. 

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9223
This contract is for the procurement of 724 fluid filter elements with NSN 4330015342361 and part number 19431541 under solicitation SPE7LX-26-U-9223, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is a total small business set-aside under NAICS code 333998, with delivery due within 78 days from the award date and FOB origin terms. The entire quantity must be delivered in exact accordance with the specified 724 units, as zero variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers from the DLA Master List take precedence over any other standard. The unit of issue is each, and all packaging must be properly marked and labeled for government identification as per contractual directives. Inspection and acceptance occur at destination. The contract stipulates that government identification must be removed from any non-accepted supplies, and the supplier must adhere strictly to DLA’s packaging and handling protocols. The point of contact for inquiries is Theodore Misiolek, with contact information provided. This solicitation, posted on August 4, 2026, with a response deadline of August 19, 2026, is managed through the DIBBS platform, and the DLA’s authoritative technical and quality requirements—effective as of the solicitation or award date depending on acquisition size—govern all aspects of compliance. The estimated quantity noted does not guarantee purchase by the IDC, but the awarded contract requires exact fulfillment of 724 units with no adjustment allowed. All deliverables must be presented in accordance with the specified unit of issue and packaging data QUP:001, fully aligned with DLA’s procurement directives.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
DIBBS
RING, CONTROL, FLUID
Solicitation # SPE7M1-26-T-249B
The contract pertains to the procurement of a RING, CONTROL, FLUID with NSN 4330-01-470-6033 and part number 7527, manufactured by Better Engineering Manufacturing Inc, under solicitation SPE7M1-26-T-249B. A single unit is required to be delivered within 20 days FOB destination, with no tolerance for variance in quantity. Delivery must be made to USS NEW YORK LPD 21 at FPO AA 34092 using the fastest traceable means, explicitly prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Acceptance occurs at the destination point, and the original required delivery date is July 30, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date as applicable. The contracting officer is Michael Reese, reachable at michael.reese@dla.mil, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7LX-26-U-9237
This contract pertains to the procurement of a fluid filter identified by NSN 2940015465058 and part number 129150-35153, sourced from Yanmar America Corporation and Komatsu America Corp, with a total quantity of 1,727 units. The procurement is governed by DLA packaging and technical requirements, including strict prohibitions against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, certain instruments, weapon systems, and chemically specified reagents. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The item is classified as a critical application item and is covered under DLA Direct, CONUS delivery with FOB origin terms, zero variance permitted in quantity, and a delivery window of 167 days. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA’s packaging standards. Inspection and acceptance occur at the destination point. The solicitation, issued under SPE7LX-26-U-9237, was posted on August 4, 2026, with a response deadline of August 19, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 333998, managed by the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
Federal
COUPLING ASSY, 1/4
Solicitation # N0010426QFC38
This contract involves the procurement of a 1/4 Inch Coupler Assembly designed for critical shipboard systems where failure could result in severe personnel injury, loss of life, or major equipment damage. The assembly is classified as Special Emphasis material (Level I, Scope of Certification) and must adhere to stringent material, manufacturing, and quality standards. The coupler includes non-metallic materials that require compliance with NAVSEA toxicity and flammability standards, and all materials and processes such as oxygen cleaning, welding, brazing, and thread inspection must follow detailed military and industry specifications. Thorough documentation, including certificates of compliance and certifications for chemical, mechanical, and non-destructive tests, is mandatory and must accompany shipments. The contract enforces tight traceability controls from raw materials through final assembly to ensure full conformance with approved specifications. Quality assurance requirements are extensive and include mandatory government quality system audits, source inspections, and strict control over subcontractors and government-furnished materials. Sampling plans for inspections follow prescribed standards with zero-defect criteria for lot acceptance. Engineering changes, waivers, or deviations require formal approvals, and all changes affecting product configuration must be documented and controlled. Packaging and marking must meet military standards, and deliveries are subject to acceptance only after certification data is reviewed and approved via the Wide Area Work Flow system. The contract also incorporates priority rating under the Defense Priorities and Allocations System for national defense and embodies emergency acquisition flexibility provisions. The overall intent is to assure the delivery of fully verified, high-reliability components essential to Navy ship safety and operational readiness.
Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
Federal
LNB
Solicitation # SPRMM126QGF63
This contract concerns the procurement of an LNB under a fixed-price arrangement, issued in accordance with FAR Part 12 for commercial products and services, with the solicitation number SPRMM126QGF63 and a response deadline of August 19, 2026. The item must strictly conform to the specified CAGE code 4NN85 and part number TLNB7500X.0002, and must be marked in compliance with MIL-STD-130 Rev N. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitutions classified under specific code designations detailing interchangeability and replacement criteria. The contractor is solely responsible for all inspection and quality assurance activities, maintaining complete records for 365 days after final delivery, and must ensure all supplies meet contract requirements regardless of explicit inspection clauses. Packaging must adhere to MIL-STD-2073 as referenced in the schedule, and if packaging occurs off-site, the facility’s address must be disclosed. Electronic submission via PIEE-WAWF is mandatory for invoices and receiving reports, and compliance with RFID requirements is contingent upon the Ship To code being listed under DFARS 252.211-7006, though no such locations are active at this time. Only authorized distributors of the original manufacturer are eligible for award, requiring proof of authorization submitted with the quote. Suppliers of surplus, new surplus, or new manufactured material must include a surplus certificate or their quote will be voided. All technical documents referenced are to be obtained through designated government sources such as DODSSP or NAVSUP-WSS, with special handling required for NOFORN and classified materials. The contractor must register with EDA on PIEE to access orders and modifications and provide a valid email for communications. Offer validity must extend at least 90 days, and the government considers contractual documents officially issued upon electronic or mailed delivery. The place of performance and inspection points are undefined in this document, leaving those details to be determined.
SPRMM1 DLA Mechanicsburg

POSTED

about 15 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
Federal
CMIDS PLATE
Solicitation # N0038326QTB96
The contract pertains to the procurement of CMIDS PLATE under solicitation number N0038326QTB96, issued by the Naval Supply Systems Command Weapon Systems Support within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, and is classified under NAICS code 333998. The primary point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil and telephone at 215-697-3528, with the office located in Philadelphia, Pennsylvania. Contractual documents are considered officially issued upon electronic transmission, including email, fax, or mail, and government acceptance of the contractor’s proposal forms a binding agreement. Early and incremental deliveries are encouraged and preferred. The contract incorporates multiple mandatory federal clauses and compliance requirements, including the mandatory use of Workflow Pro (WFP) Mod Assist Module, adherence to Buy American and Free Trade Agreements, and certification for Balance of Payments Program compliance. Security prohibitions and exclusions, equal opportunity provisions for workers with disabilities, and specific naval directives regarding AbilityOne contractor information release are fully applicable. The contract also enforces Notice of Priority Rating for national defense and emergency preparedness purposes, and requires strict compliance with Item Unique Identification and Valuation standards effective January 2023. Payment instructions are linked to Wide Area Workflow, with invoice and receiving report details to be confirmed, and royalty information and annual representations are required per applicable deviations and amendments effective through 2026.
Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333998
New
Federal
TRANSMITTER,PRESSURE
Solicitation # 70z08026QDE027
The U.S. Coast Guard Surface Forces Logistics Center is soliciting bids for 20 pressure transmitters, part number 0025353231, manufactured by Rolls-Royce Solutions GmbH, for use on 87 WPB vessels. The items must be sourced as brand name products, with no substitutions allowed unless they meet all salient physical, functional, and performance characteristics and are approved by the Coast Guard. Each transmitter must be individually packaged in compliance with MIL-STD-2073-1E Method 10 and marked according to MIL-STD-129R, using ISO/IEC-16388-2007 Code 39 symbology for barcoding; failure to comply will result in rejection and return of the shipment. The solicitation is issued under FAR Subpart 12.6 as a commercial item acquisition using simplified acquisition procedures, with award based on the lowest price technically acceptable model under a firm fixed price contract. Delivery is required to 2401 Hawkins Point Road, Baltimore, MD, 21226. Vendors must be registered in SAM, possess a valid DUNS number, provide their Tax Identification Number, and submit quotes via email to Eric.I.Goldstein@uscg.mil by August 11, 2026, at 9:00 AM Eastern Standard Time. All quotes must include a completed FAR 52.212-3 form and a disclosure regarding inverted domestic corporation status. The contract incorporates numerous FAR clauses related to ethics, labor standards, equal opportunity, anti-trafficking, Buy American, export controls, cybersecurity, and supply chain security. Of particular note, clauses prohibiting contracting with Kaspersky, ByteDance, and certain foreign entities, along with requirements for electronic funds transfer and compliance with human rights and labor protections, are binding. The set-aside designation is for total small business, and a HUBZone price evaluation preference applies. Vendors must explicitly confirm their ability to meet the mandatory packaging and marking requirements; standard commercial packaging is unacceptable. The NAICS code is 333998, and the small business size standard is 500 employees.
Sflc Procurement Branch 1(00080)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

NAICS: 541330
New
Federal
DMS Tech Manual Updates
Solicitation # N64498-26-RFPREQ-PD-42-0187
The Naval Surface Warfare Center, Philadelphia Division is seeking to update Technical Manuals for the LCS 6-38 class of ships under a sole-source procurement from Defense Maritime Systems, the Original Equipment Manufacturer, due to their exclusive knowledge and capability to perform the work. The contract will be issued as a Firm-Fixed-Price Basis of Agreement under FAR 6.302-1, with no competitive bidding, and services will be performed at the contractor’s facility in Chesapeake, Virginia. The effort is classified under NAICS code 541330 with a small business size standard of 1,250 employees and falls under Product Service Code R425. All offerors must be registered in the System for Award Management, and proposals must include both technical and price components. The solicitation, identified as N64498-26-RFPREQ-PD-42-0187, was posted on July 31, 2026, with a response deadline of August 14, 2026. The work is managed by the Department of Defense through the NSWC Philadelphia Division office located in Philadelphia, Pennsylvania. Primary point of contact is Taylor Sloan, reachable via phone or email, with Michael R. Sommeling listed as secondary contact. The requirement is not set aside for small businesses, and the procurement follows a presolicitation process leading to formal RFP issuance in August 2026, aligning with the anticipated timeline for contract award and execution.
Engineering Services

POSTED

5 days ago

DEADLINE

in 10 days
View Details