Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

National Flag Manufacturing and Supply

Active

Federal

Response Deadline08/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through C AND T Supply Chain for the Department of Defense involves the manufacture and supply of 80 national flags. All deliverables must strictly comply with MIL-DTL-2692 specifications, including all requirements for packaging, preservation, and marking according to established military standards. The opportunity falls under NAICS code 313310 and was posted on August 11, 2026. Interested parties must submit their responses by the deadline of August 18, 2026.

General Info

C AND T Supply Chain subcontract for 80 DoD flags per MIL-DTL-2692 specifications.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

313310 - Textile and Fabric Finishing MillsView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-26-Q-0416.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAG, NATIONAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 05:00:00 PM UTCin about 24 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → C AND T SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 80 national flags compliant with MIL-DTL-2692, including packaging, preservation, and marking per military standards.

Similar Contracts

Same NAICS industry code

Manufacture of Medical Litter Extension (Patient’s Pillow Support-Backrest)This subcontract involves the manufacture of two fire-resistant patient backrest units designed for use as medical litter extensions. The units must be constructed from a Nomex and Kevlar blend fabric and be fully compatible with both the Talon Litter and Raven Model 90C systems. The project is managed by the Department of Defense under the Medical Supply Chain FSH. Performance of the contract will take place at Fort Campbell, Kentucky. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026, falling under NAICS code 313310.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Domestic Textile Material SupplyThe Department of Defense, through C and T Supply Chain, is seeking a subcontractor for the domestic supply of textile raw materials, including thread, fabric, and backing. All materials must be sourced from the United States or approved locations and must strictly adhere to MIL-DTL-14652B and ASTM D 3591 standards, with a total exclusion of prohibited foreign sources. This subcontract opportunity falls under NAICS code 313310 and was posted on August 14, 2026. Interested parties must submit their responses by the deadline of August 21, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Textile and Fabric Supply for Uniform ProductionTexas A&M University is seeking a subcontractor for the supply of raw fabrics intended for institutional uniform manufacturing. The required materials include worsted wool, poly-cotton blends, and other durable fabrics. This procurement falls under NAICS code 313310. The solicitation was posted on August 14, 2026, and the deadline for responses is August 28, 2026. Interested parties can find further details through the provided Texas SmartBuy link.

Texas A&M University

POSTED

DEADLINE

Textile Material Supply (Polyester/Nylon/Rubber Webbing)

DLA Troop Support

POSTED

DEADLINE

U.S.-Based Technical Fabric SupplyThe Department of Defense is seeking a subcontractor for the supply of technical fabrics intended for military softshell jackets. The required materials include domestically produced 4-way stretch laminated shell fabric that is Berry-compliant, as well as 100% polyester mesh inner fleece. This procurement is categorized under NAICS code 313310 and is designated as a total set-aside for small businesses. The opportunity was posted on August 13, 2026, with a response deadline of August 19, 2026. Performance for this contract is associated with zip code 95903. Interested parties must ensure all materials meet the specified domestic production and compliance standards to be eligible for the award.

FA4686 9 Cons Pk

POSTED

DEADLINE

Dynamic Ropes (60m) SupplyThe Department of Defense, specifically the FA4620 92 Cons Lgc agency, is seeking a subcontractor for the supply of 50 units of 60-meter dynamic climbing ropes. These ropes must be rated for lead climbing and rescue operations. This opportunity is designated as a total Small Business Set Aside under NAICS code 313310. The contract was posted on August 13, 2026, with a response deadline of August 21, 2026. The place of performance for this requirement is Fairchild Air Force Base, located in zip code 99011.

FA4620 92 Cons Lgc

POSTED

DEADLINE

Light-Colored, Decontamination-Ready Fabric SupplyThe National Institutes of Health Olao, under the Department of Health and Human Services, is seeking a subcontractor for the supply of specialized fabric. The required material must be lightweight, light-colored, and feature smooth seams designed to resist contamination retention while remaining compatible with chemical decontamination processes. This opportunity falls under NAICS code 313310 and is designated for performance in Latham, New York. Interested parties must submit their responses by August 21, 2026, at 1:00 PM.

National Institutes Of Health Olao

POSTED

DEADLINE

Uniform Component Supply (Fabrics, Patches, Fasteners)

US Embassy Jakarta

POSTED

DEADLINE

Domestic Material Sourcing & Berry Amendment ComplianceThis subcontract opportunity with C AND T SUPPLY CHAIN for the Department of Defense involves the procurement of U.S.-made scarlet broadcloth, gold thread, and backing materials. The primary objective is to ensure all supplied materials comply with the Berry Amendment and DFARS 252.225-7012 regulations for the production of military uniform components. The project falls under NAICS code 313310 and will be performed in Phoenix, Arizona. Interested parties must submit their responses by August 18, 2026, following the posting date of August 12, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

in about 24 hours

Domestic Textile Material SupplyThis subcontract opportunity is for the supply of domestically sourced cotton-polyester broadcloth fabric intended for the production of DLA pajama coats. The materials must adhere to specific federal specifications to ensure quality and compliance for the Department of Defense, specifically under the Medical Supply Chain FSH. The procurement is categorized under NAICS code 313310 and is managed by the Department of Defense. Interested parties must submit their responses by August 19, 2026, with the place of performance located at APO 09094-3219.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Textile Material Supply (Outer Shell, Insulation, Liners)This subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the procurement of specialized military-spec fabrics essential for parka production. The scope of supply includes windproof outer shells, thermal insulation, moisture-wicking liners, and camouflage textiles, ensuring the finished garments meet rigorous defense standards for protection and performance. Classified under NAICS code 313310, the agreement was posted on August 11, 2026. It establishes the necessary material pipeline to support the manufacturing of cold-weather gear, coordinating the delivery of technical textiles required for high-performance military apparel.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Fabric and Material Supply

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 24 hours

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

RIBBON ATTACHMENT, A

Solicitation # SPE1C1-26-Q-0435

This contract is a firm fixed price solicitation for the procurement of 11,000 ribbon attachments for the Army, Marine Corps, and Navy. The delivery is required within 191 days after the order is placed, with the destination for inspection and acceptance set at the delivery point. The contractor is required to provide five first article samples for testing, and the government will provide notification of the results within 30 calendar days of receipt. Compliance with several technical and quality standards is mandatory, including DLA packaging requirements, MIL-STD-129 for marking, and MIL-R-41819 for preservation and packaging levels. The contract specifies that any government identification must be removed from non-accepted supplies and notes that covered defense information potentially applies. Shipping and delivery are directed to Arizona Industries for the Blind in Phoenix, Arizona.

POSTED

DEADLINE

INSIGNIA, SHOULDER S

Solicitation # SPE1C1-26-Q-0434

This contract is a firm fixed price solicitation for the procurement of 9,300 units of shoulder insignia, specifically ribbon attachments for numerals used by the Army and Marine Corps, as well as strike flight ribbons for the Navy and Marine Corps. The delivery is required within 138 days after the order, with the inspection and acceptance points set at the destination. The contractor must provide five first article samples for testing, and the government will provide notification of the results within 30 calendar days of receipt. Compliance with several technical and quality standards is mandatory, including DLA packaging requirements, MIL-STD-129 for marking, and ASTM-D-3951 for packaging. Specific packaging instructions require insignia to be bundled in groups of 20, with larger bags containing 400 units, and a maximum of 14 bags per container. The shipment is destined for Arizona Industries for the Blind in Phoenix, Arizona, and must adhere to the specified DoD units of issue and palletization standards.

POSTED

DEADLINE

TROUSERS, FLIGHT DEC

Solicitation # SPE1C1-26-Q-0365

This contract is for the procurement of Navy Blue, flame-resistant flight deck trousers, manufactured in accordance with NCTRF PD 11-07E. The requirements include specific technical standards for fly slide fasteners, detailed labeling for identification and laundering instructions, and strict adherence to finished dimensions across various sizes. The contractor must provide supply chain traceability documentation and comply with CMMC Level 2 certification and other DLA quality and technical requirements. The items are to be delivered to the Pendergrass Distribution Center in Georgia within 163 days after the order. Packaging must utilize greaseproof, waterproof, heat-sealable barrier materials and double-wall fiberboard shipping containers, with 20 trousers of a single size and color per container. All marking and palletization must conform to MIL-STD-129 and RP001 standards to ensure protection against extreme naval aviation environments.

POSTED

DEADLINE

INSIGNIA, SHOULDER S

Solicitation # SPE1C1-26-Q-0433

This firm fixed price contract is for the procurement of 40,000 embroidered shoulder sleeve insignia for the 42nd Infantry Division of the Army. The insignia must be produced using OCP Bagby Green 67204 and Black Han 67138 threads with hook fastener tape backing and overedge stitching of 2,750 stitches each. The order must comply with specific technical and quality requirements, including CMMC Level 2 self-assessment and covered defense information standards. Delivery is required within 105 days after order, with inspection and acceptance occurring at the destination. Packaging must follow strict guidelines, with items bundled in groups of 20 in plastic bags, then grouped into larger bags of 400, and finally packed into containers of 5,600 units. All shipping and marking must adhere to MIL-STD-129 and DLA packaging requirements, with the final destination being Arizona Industries for the Blind in Phoenix, Arizona.

POSTED

DEADLINE

Solicitation # SPE1C1-26-Q-0437

This contract is for the procurement of 60 non-magnetic steel flagstaffs, each measuring 9 feet in length with a 2 inch diameter from base to top. The items must be one-piece construction and feature the letters NM stenciled on each staff. This is a firm fixed price agreement with a delivery requirement of 150 days after order, with both inspection and acceptance occurring at the destination. The contractor is required to submit two first article samples for visual, dimensional, and shade examination, with a 30 day evaluation period. Compliance with DLA packaging requirements, MIL-STD-129 marking, and specific mercury-free material restrictions is mandatory. The supplies are to be delivered to Arizona Industries for the Blind in Phoenix, Arizona.

POSTED

DEADLINE

BAG, SPECIFIC PURPOS

Solicitation # SPE1C1-26-T-1632

This contract is for the procurement of one large specific purpose bag, identified by NSN 8465-01-696-6691, from Mystery Ranch LLC. The delivery is required within 20 days after the order, with a final required delivery date of August 18, 2026. The item is to be delivered FOB destination to the Distribution Management Office at Camp Pendleton, California, using traceable shipping methods. Strict labeling and packaging requirements are mandated, including the use of individual bar-coded paper tags featuring both a 13-digit National Stock Number and a 12-digit Universal Product Code. Packaging must comply with DLA requirements and MIL-STD-129, with specific instructions for hazardous or non-hazardous materials. Inspection and acceptance will occur at the destination point in accordance with FAR part 52.246-2.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

POUCH, FACE PLATE ST

Solicitation # SPE1C1-26-T-1633

This contract, identified by solicitation number SPE1C1-26-T-1633, is for the procurement of 270 units of Pouch, Face Plate ST, identified by NSN 8465-01-568-9642 and Avox Systems Inc part number 806440-01. The requirement is issued by the Department of Defense under the C and T Supply Chain agency and is designated as a Total Small Business Set-Aside. Delivery is required within 111 days, with an original required delivery date of May 20, 2027. The contract specifies that delivery, inspection, and acceptance will all occur at the destination, with shipments directed to the Travis Association for the Blind in Austin, Texas. Compliance with several technical and quality standards is mandatory, including MIL-STD-129 for marking, ASTM-D-3951 for packaging, and RP001 for DLA packaging requirements. The agreement also incorporates specific quality requirements for manufacturers and non-manufacturers and notes that covered defense information may potentially apply.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

INSIGNIA, SHOULDER S

Solicitation # SPE1C1-26-Q-0439

This firm fixed price contract is for the procurement of 7,500 embroidered shoulder sleeve insignias for the Army 30th Infantry Brigade. The insignias must be produced using OCP Bagby Green 67204 and Black Han 67138 threads, featuring hook fastener tape backing, overedge stitching, and a minimum stitch count of 3,500. The items must adhere to technical specifications DD 22571 A-1-95 and comply with DLA packaging and quality requirements, including ANSI/ASQC Z1.4 standards. The contractor is required to provide five first article samples for testing, with notification of results provided within 30 calendar days of receipt. Delivery is set for 134 days after the order, with the destination and acceptance point located at Arizona Industries for the Blind in Phoenix, Arizona. Packaging requirements specify that insignias be bundled in groups of 20, with 400 units per sealed plastic bag, and a maximum of 14 bags per container in accordance with MIL-STD-129P and ASTM D 3951.

POSTED

DEADLINE

CARABINER, PULLEY

Solicitation # SPE1C1-26-T-1634

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

SERVICE RIBBON, AWARD

Solicitation # SPE1C1-26-Q-0432

POSTED

DEADLINE

Cybersecurity Compliance Implementation (NIST SP 800-171)This subcontract opportunity with C AND T SUPPLY CHAIN for the Department of Defense focuses on the implementation and maintenance of NIST SP 800-171 controls to ensure the protection of covered defense information. The scope of work includes performing system assessments, developing necessary documentation, and managing incident reporting to maintain cybersecurity compliance. The project is based at Camp Pendleton, zip code 92055-5761, and falls under NAICS code 541512. Interested parties must submit their responses by the deadline of August 27, 2026, following the posting date of August 16, 2026.

Computer Systems Design Services

POSTED

DEADLINE

Radioactive Materials Notification ComplianceThis subcontract opportunity with C AND T Supply Chain under the Department of Defense requires the identification and notification of any radioactive components within materials, in accordance with Clause 52.223-7. The scope of work may involve detailed material analysis and the submission of necessary regulatory reporting to the contracting officer. The project is based at Camp Pendleton, California, and falls under NAICS code 541620. Interested parties must submit their responses by the deadline of August 27, 2026, following the posting date of August 16, 2026.

Environmental Consulting Services

POSTED

DEADLINE