Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NDT Inspection and First Article Testing (FAT) Support

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for NDT Inspection and First Article Testing Support serves the DLA Weapons Support Fluid Handling Division within the Department of Defense. The selected contractor will perform non-destructive testing to identify internal flaws and utilize Coordinate Measuring Machines for dimensional verification on projects for prime contractors. All work is to be performed in New Cumberland, Pennsylvania, with a strict requirement for NADCAP accreditation for NDT services and adherence to AS9100 standards. The contractor is responsible for providing comprehensive test reports, dimensional worksheets, and calibration certifications for all measuring instruments used. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must submit their responses by November 16, 2026.

General Info

NADCAP accredited small business NDT and dimensional testing support in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M3-27-T-1174.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ADAPTER BUSHING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing and dimensional verification for prime contractors on DLA Weapons Support Fluid Handling Division projects. Conducts NDT to identify internal flaws and uses CMM for dimensional checks. Provides calibration certifications for all measuring instruments. Requires NADCAP accreditation for NDT and AS9100 standards. Delivers comprehensive test reports, dimensional worksheets, and calibration certifications.

Similar Contracts

Same NAICS industry code

Designated Substances Survey (DSS)This subcontract involves providing specialized sampling and analysis for hazardous materials on behalf of prime contractors for the Government of Ontario Ministry of Energy and Mines. The primary objective is to conduct Designated Substances Surveys across eight different mine sites to identify the presence of asbestos, lead, and PCBs. The selected provider must employ a certified hazardous materials surveyor and ensure all activities maintain strict compliance with the Occupational Health and Safety Act. The final deliverable for this engagement consists of comprehensive Designated Substances Survey reports for each of the eight designated sites.

Energy and Mines

POSTED

about 7 hours ago

DEADLINE

Quality Assurance Representative (QAR) Support/InspectionThis subcontract opportunity is for Quality Assurance Representative support and inspection services benefiting the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform specialized quality inspections and verifications for prime contractors, specifically focusing on critical gun parts and military-grade gun mounts. Work is conducted at the manufacturer's facility using precision measurement tools to ensure all unique requirements are met prior to formal acceptance or rejection. All activities must adhere strictly to DLA and DoD Quality Assurance Representative standards, culminating in the delivery of detailed inspection reports. The place of performance is located in Fort Campbell, Kentucky. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 541380.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Testing services supporting the DLA Weapons Support Land Supply Chain. The selected provider will validate manufacturing processes for prime contractors by testing sample units against the technical data package using strength testing and metrology equipment. A formal test report must be delivered within 30 calendar days of the contract date. The project is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Due to the nature of the work, the contractor must maintain ITAR and EAR compliance as well as CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Aerospace Dimensional Inspection and FAT ValidationThis subcontract opportunity, titled Aerospace Dimensional Inspection and FAT Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing dimensional verification and quality assurance services for prime contractors, specifically focusing on the validation of First Article Tests and production lots. Work is performed at Tinker AFB and requires the use of CMM or optical comparators to ensure compliance with ASME Y14.31 and MIL-STD-1916 standards, including the verification of Digital Mylar data and grid unit tolerances. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, providers must maintain ISO 9001:2015 certification and are responsible for delivering detailed inspection reports and certifications of conformance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Third-Party Quality Inspection and Certification (Zero-Based Sampling)This subcontract for Third-Party Quality Inspection and Certification involves providing independent inspection and acceptance services at the origin for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the execution of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to verify bare item marking and close tolerance specifications. To ensure accuracy, the contractor must utilize precision measurement tools such as optical comparators or CMM and deliver formal certification of acceptance along with detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing First Article Testing and Validation for Electrical Assemblies to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on executing test protocols for NSN 5995-01-731-1405 using calibrated Measurement and Test Equipment in accordance with requirement RT001. To access the necessary technical data, the performing party must hold US/Canada Joint Certification Program certification. The project is managed under NAICS code 541380 for the Department of Defense, with performance located in New Cumberland. The primary deliverable is a certified First Article Test Report, which must be submitted within 60 calendar days. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract, titled First Article Test (FAT) Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The primary objective is to perform initial quality and specification validation for prime contractors. The scope of work involves executing First Article Testing per CLIN 0002 to verify that dimensions and material properties align with the Technical Data Package using material analysis equipment and precision measurement tools. The successful contractor is responsible for ensuring all defined acceptance criteria are met and delivering a validated First Article along with a comprehensive test report. Performance will take place at Robins Air Force Base. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract involves providing technical testing and validation services for prime contractors under DLA supply contracts, specifically managed by the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament. The primary objective is to conduct First Article Testing to ensure that armor meets rigorous fragmentation and small arms resistance standards. These evaluations are performed using specialized ballistic testing ranges and fragmentation simulation equipment. The selected provider is responsible for delivering comprehensive test reports and validation data that adhere to DLA portal technical standards, culminating in the delivery of the FAT Certification. The work is designated under NAICS code 541380 and is to be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

Third-Party Quality Assurance and Source Inspection ServicesThis subcontract for Third-Party Quality Assurance and Source Inspection Services supports the Department of Defense DLA Weapons Support ASC. The selected provider will perform source inspections and quality verification for prime contractors, specifically focusing on Latch Assembly compliance. Technical requirements include the use of zero-based sampling plans according to MIL-STD-1916 or ASQ H1331 and the validation of dimensions against NAVSEA 80064 series drawings. The project is based in San Diego and requires the contractor to hold JCP certification to access export-controlled technical data. Key deliverables include signed inspection reports and certifications of compliance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) and Quality InspectionThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, focuses on First Article Testing and quality inspection services for prime contractors. The scope of work involves executing FAT per CLIN 0002 using zero-based sampling plans according to MIL-STD-1916 or ASQ H1331, as well as verifying mercury containment in compliance with NAVSEA 5100-003D. To ensure technical precision, the contractor must utilize RF signal analyzers, impedance testers, and continuity testers, while maintaining alignment with SAE AS9003 or ISO 9001 quality standards. The final deliverables include a comprehensive FAT Report and first article certification. The opportunity is a total small business set-aside under NAICS code 541380, with the place of performance located in Greensboro, North Carolina. Interested parties must adhere to the response deadline of November 13, 2026. This contract ensures that critical weapon support components meet rigorous military and quality specifications before full-scale production.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThe First Article Test Evaluation and Certification subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the performance of First Article Testing to validate the acceptability of items for prime contractors. The selected provider will conduct rigorous testing on the initial production unit to ensure compliance with technical specifications, utilizing specialized measurement equipment to verify tolerances. The scope of work includes close coordination with the Engineering Support Activity for final evaluations, culminating in the delivery of a comprehensive FAT report and a formal acceptability determination. This effort is categorized under NAICS code 541380 and is to be performed in Albany, Georgia.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) and Quality CertificationThis subcontract for First Article Testing and Quality Certification supports the Department of Defense DLA Weapons Support Land Supplier Operations Vehicle Support. The selected contractor will perform specialized testing on three initial units to validate aerospace manufacturing processes and ensure compliance with Air Force Critical Safety Item standards. Work will be performed at Tinker AFB using metrology equipment and testing rigs to verify technical specifications. The contractor must maintain AS9100 quality oversight and CMMC Level 2 certification for secure data transmission. The primary deliverables include certified test units and a formal First Article Test Report, both of which must be submitted within 30 calendar days. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of TEE, TUBE TO BOSSThis subcontract involves the manufacture and supply of TEE, TUBE TO BOSS hardware for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing or producing components that strictly adhere to technical specifications and ensuring all items are delivered to the designated performance location in New Cumberland. Compliance is a critical component of this agreement, requiring strict adherence to DFARS 252.225-7001 Buy American and Balance of Payments Program regulations. Additionally, all hardware must be packaged according to ASTM D3951, labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements to meet military standards.

POSTED

about 9 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720012242968)This subcontract involves the supply of 103 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing assemblies that meet the technical specifications for Danfoss P/N 1C12408HHH028AAA, Parker-Hannifin P/N 24221-8S-0280, or Safran P/N CCH12019. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The project falls under NAICS code 339999 and is centered in Barstow, California. Interested parties must respond by November 16, 2026, to provide the required compliant hose assemblies under NSN 4720012242968.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Loop Clamp SupplyThis subcontract involves the supply of 6,732 critical application loop clamps for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be manufactured or sourced in strict accordance with part standard SAE AS21919E Revision E and Part Piece Number AS21919WDG06. Performance will take place at Tinker AFB, with all deliverables adhering to MIL-STD-2073-1E packaging standards and the DLA Master List of Technical and Quality Requirements. The contract specifically manages TYPE I CODE Y items, which carry a non-extendable shelf life of 180 months. Interested parties must respond by November 16, 2026, regarding this requirement under NAICS code 332312 for the Department of Defense.

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

First Destination Transportation (FDT) Freight ServicesThe First Destination Transportation Freight Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the transportation of fluid handling hardware for prime contractors. The selected provider is responsible for coordinating pickups from suppliers on an FOB Origin basis and managing the entire transit process to the final government destination. Key operational requirements include the mandatory use of U.S.-flag vessels for all ocean transport and the provision of comprehensive freight documentation, specifically detailing the gross weight and port of loading. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the supply of 432 straight tube-to-boss adapters, identified by NSN 4730013542660, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for manufacturing or sourcing the adapters to meet strict technical specifications, ensuring all items are packaged according to MIL-STD-2073-1E and shipments are marked in compliance with MIL-STD-129. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.

POSTED

about 9 hours ago

DEADLINE

Manufacture of Straight Pipe-to-Hose Adapter (NSN 4730-01-330-3596)This subcontract involves the manufacture of one straight pipe-to-hose adapter, part number 1243-2294-2, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The component must be fabricated from copper alloy materials and strictly adhere to NAVSEA 5100-003D mercury-free requirements. The selected provider is required to supply comprehensive material traceability documentation and certify that the delivered part is in a new and unused condition. This procurement falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 9 hours ago

DEADLINE

Pipe Nipple Supply (NSN 4730001962037)This subcontract involves the supply of 16 pipe nipples for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the components in strict accordance with the dimensions and material standards specified by NSN 4730001962037. All deliverables must adhere to DLA quality standards and comply with the Nonmanufacturer Rule under FAR 52.219-33. Logistics for the contract are managed through the First Destination Transportation program, with the place of performance located in New Cumberland. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332996.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

Copper Alloy Pipe Tee SupplierThis subcontract involves the procurement of one Copper Alloy Pipe Tee to support prime contractors for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing a component that strictly adheres to NSN 4730-01-191-4102 specifications. Additionally, the contractor must ensure full compliance with the Buy American Act and RA001 quality requirements. The scope of work includes specialized packaging and marking in accordance with MIL-STD-129, MIL-STD-2073-1E, and DLA requirement RP001. Once processed, the final product must be delivered to the Trident Refit Facility located in Kings Bay. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Metallic Tubes (NSN 4710-01-541-1223)This subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the manufacture or distribution of 12 specialized metallic tubes identified by NSN 4710-01-541-1223. These components are intended for prime contractors working on Department of Defense FDT program projects and must be delivered to the designated destination in Tracy, California, within 168 days. All items must strictly adhere to established DoD transportation and shipping regulations. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332410. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Nonmetallic Hose AssembliesThis subcontract involves the manufacture and supply of 30 nonmetallic hose assemblies, specifically NSN 4720-01-339-8531, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the units in accordance with the DLA Master List of Technical and Quality Requirements and ensuring all items are packaged according to ASTM D3951 and MIL-STD-129 standards. The agreement requires strict adherence to the Buy American Act and the Hazard Communication Standard 29 CFR 1910.1200. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339113. The response deadline for this opportunity is November 16, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 9 hours ago

DEADLINE

Metal Tube Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 106 specialized metal tube assemblies for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing assemblies to precise technical specifications and part numbers 1MB902, 9081001, and 9081001P. Due to the nature of the components, the contractor must implement rigorous quality control for items designated as Critical Application Items and ensure all procurement packaging requirements are met. The project is categorized under NAICS code 332312 and will be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The final products are intended for prime contractors who are delivering on larger DLA supply contracts.

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the supply of two nonmetallic hose assemblies identified by NSN 4720016071563. The selected supplier is responsible for manufacturing or sourcing these items for prime contractors on DLA supply contracts, with performance taking place in New Cumberland. Strict compliance is required regarding environmental and documentation standards, specifically the prohibition of Class I ozone depleting chemicals during production. Additionally, the supplier must provide comprehensive supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. The response deadline for this opportunity is November 16, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Non-Destructive Testing (NDT): Fluorescent Penetrant Inspection

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

Third-Party Inspection and Zero-Based Sampling

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Aerospace Quality Inspection and Certification Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT) for Critical Safety Items

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) Production and Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

NDT Inspection and Certification for Critical Safety Items

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Laboratory Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Production Lot Testing (PLT) Support

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Airworthiness Certification Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) for Pressure Gages

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS