NEEDLE, HYPODERMIC
Active
SPE2DS-26-T-330GFederalResponse Deadline
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Show more
This contract is for the procurement of sterile, disposable, double-pointed hypodermic blood collecting needles, 20 gage and 1-1/2 inch, featuring a shut-off sleeve and yellow needle hub. The requirement is for two packages of 1,000 units each. The items must have a total shelf life of 60 months, with no more than 9 months elapsed from the date of manufacture to the date of delivery to the government. Packaging must adhere to commercial standards and ASTM D3951, ensuring each unit is in a sealed container to prevent damage. Markings must comply with Medical Marking Standard No. 1, including the lot number and manufacture date. Delivery is set for five days after order, with the destination being the Carrier Outfitting Material Support Center in Suffolk, Virginia. This is an FDA-regulated device, and the contract prohibits the intentional addition of mercury or mercury-containing compounds.
General Info
Procurement of 2,000 sterile 20-gauge blood needles for delivery to Suffolk, Virginia.
Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency
NAICS
339113 - Surgical Appliance and Supplies ManufacturingView NAICS
Place of Performance
6701 COLLEGE DRIVE, DOORWAY 71, SUFFOLK, VA, 23435-5000, USASet-Aside
NONE
Timeline
PhaseSolicitation
Response Deadline
Organization & Contact Information
Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA
Office AddressUSA
Contacts
Full Description
Show more
NEEDLE,HYPODERMIC
NEEDLE, HYPODERMIC, BLOOD COLLECTING, MULTIPLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLE, DOUBLE-POINTED, DISPOSABLE, 20 GAGE,
1-1/2 INCH, WITH SHUT-OFF SLEEVE, STERILE, 1000S
.
YELLOW NEEDLE HUB
.
U/I PACKAGE (PG) OF 1,000 EACH
.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NO MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
SPE2DS-26-T-330G
SECTION B
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERMENT.
.
9/11/2013
.
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED
BY "MFD".
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . FLEET PRIME VENDOR ITEM . BIDDER SHALL SPECIFY CO & P/N BEING SUPPLIED . . .
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
ICU MEDICAL SALES, INC. 85RR5 P/N 80205 BECTON DICKINSON AND CO BECTON 51965 P/N 367215 SHERWOOD MEDICAL CO 05963 P/N 8881-216025
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017811062 0001 PG 2.000
NSN/MATERIAL:6515010032368
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE2DS-26-T-330G
SECTION B
PR: 7017811062 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
M/F: (TCN) N2341062125063
RDD: 999
PROJ: ZD8 TP 1
SUPP ADD: N48253 SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: X9B ADV: 2A FC: MQ
Need Ship Date:00/00/0000 Original Required Delivery Date:08/13/2026
SPE2DS-26-T-330G NSN/Part Number: 6515-01-003-2368 Quantity: 2 PG Purchase Request: 7017811062QTY: 2 Delivery: 5 days ADO
NEEDLE, HYPODERMIC, BLOOD COLLECTING, MULTIPLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLE, DOUBLE-POINTED, DISPOSABLE, 20 GAGE,
1-1/2 INCH, WITH SHUT-OFF SLEEVE, STERILE, 1000S
.
YELLOW NEEDLE HUB
.
U/I PACKAGE (PG) OF 1,000 EACH
.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NO MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
SPE2DS-26-T-330G
SECTION B
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERMENT.
.
9/11/2013
.
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED
BY "MFD".
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . FLEET PRIME VENDOR ITEM . BIDDER SHALL SPECIFY CO & P/N BEING SUPPLIED . . .
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
ICU MEDICAL SALES, INC. 85RR5 P/N 80205 BECTON DICKINSON AND CO BECTON 51965 P/N 367215 SHERWOOD MEDICAL CO 05963 P/N 8881-216025
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017811062 0001 PG 2.000
NSN/MATERIAL:6515010032368
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE2DS-26-T-330G
SECTION B
PR: 7017811062 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
M/F: (TCN) N2341062125063
RDD: 999
PROJ: ZD8 TP 1
SUPP ADD: N48253 SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: X9B ADV: 2A FC: MQ
Need Ship Date:00/00/0000 Original Required Delivery Date:08/13/2026
SPE2DS-26-T-330G NSN/Part Number: 6515-01-003-2368 Quantity: 2 PG Purchase Request: 7017811062QTY: 2 Delivery: 5 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency