Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NEEDLE, HYPODERMIC

Active
SPE2DS-26-T-322TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of sterile, single-use hypodermic needles with a 27-gauge size, 1.5-inch length, precision bevel design, and a grey hub, all latex-free and packaged in quantities of 100 per unit. The item is identified by NSN 6515-01-562-0759 and is subject to a non-extendable shelf life of 60 months as mandated by RS023 requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. The item is covered under potential defense information controls and requires bidders to clearly state the source and part number being offered. The solicitation is issued under contract number SPE2DS-26-T-322T with a response deadline of August 17, 2026, and a delivery requirement of 20 days after order placement. The performing location is Fort Bragg, North Carolina, with the Department of Defense’s Medical Supply Chain as the procuring agency and Michael Kohlbrenner designated as the primary point of contact.

General Info

Procure 27-gauge, 1.5-inch latex-free hypodermic needles, NSN 6515-01-562-0759, 100 per pack, 60-month shelf life, delivery in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

BLD A5474 PRATT ST, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-322T Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Michael Kohlbrenner
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NEEDLE,HYPODERMIC
NEEDLE,HYPODERMIC
PRECISIONGLIDE; REG. BEVEL; LATEX FREE; 27GA; HUB COLOR: GREY; NEEDLE
LGTH: 1.500; STERILE, SINGLE USE; REG. WALL; PKG/100.
UNIT OF ISSUE: PACKAGE/100EACH
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-562-0759 Quantity: 1 PG Purchase Request: 7017773763QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
Supply of Radio Frequency Interference (RFI) FiltersThe contract specifies the procurement and delivery of 16 units of Radio Frequency Interference (RFI) filters designated by National Stock Number 5915011335911, intended for use under Department of Defense requirements. All items must comply with federal shipping, labeling, and documentation regulations, including full disclosure of any hazardous materials associated with the filters. The work is to be performed and delivered to a designated location in San Diego, California, with the zip code 92136-3581. The contract falls under the NAICS code 334511, indicating it pertains to the manufacturing of electronic components, and is classified as a subcontract. The solicitation was posted on August 9, 2026, with a mandatory response deadline of August 20, 2026. The contracting activity is managed by the Active Devices Division of the Department of Defense, and bidders must adhere to all associated federal procurement standards and timelines outlined in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Manufacture and Supply of Electronic Covers (NSN 5895-01-576-1316)The contract requires the manufacture, testing, packaging, labeling, and delivery of two electronic covers identified by NSN 5895-01-576-1316, ensuring full compliance with all applicable military and federal standards. The work must be performed in accordance with rigorous quality and technical specifications to meet operational requirements, with delivery targeted to the Tobyhanna location at zip code 18466-5050. The solicitation is classified as a subcontract under NAICS code 334511, indicating involvement in the manufacturing of electronic components. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and is administered by the Electrical Devices Division under the Department of Defense. All activities must align with the contractual obligations outlined in the official solicitation accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
COVER, ELECTRONIC CO
Solicitation # SPE7M8-26-T-5910
The contract covers the procurement of two units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 and part number G611721-1, under solicitation SPE7M8-26-T-5910, with a required delivery within five days of order issuance and a required delivery date of August 6, 2026. The unit price is $2.00 per unit, totaling $4.00, with no variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization guided by DLA Packaging Requirements for Procurement, and DLA’s Master List of Technical and Quality Requirements takes precedence over any conflicting standards. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. The goods must be shipped by the fastest traceable means, explicitly prohibiting parcel post, to the receiving facility at Tobyhanna Army Depot, Pennsylvania, with a designated freight address and marking instructions provided. The supplier must adhere to configuration change management, variance request protocols, and removal of government identification from non-accepted items. The unit of issue is each, and the contract references the DoD authorized unit of issue system. Government-specific identifiers, including IPD, DIC, DIST, and FC codes, are included for internal tracking. Contact for inquiries is Dondiego Boler at the provided phone and email, with full details accessible via the DIBBS portal.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
NON-NSN ITEM
Solicitation # SPE4AC-26-T-0079
A single unit of Instrumentation I IST, identified by CAGE code 78286 and part number 70500-52062-074, is being procured under contract SPE4AC-26-T-0079 for delivery to the U.S. Department of Defense facility in Corpus Christi, Texas. The item must be delivered within five days of contract award with no tolerance for variance in quantity, and delivery is FOB destination, where inspection and acceptance also occur. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements, and the unit of issue is one each. The shipment is designated as RDD 999/NMCS and must be sent by the fastest traceable method, explicitly excluding parcel post. The delivery address and mark-for location are both the U.S. Department of Defense facility at Corpus Christi, with the military freight identifier W45N7V621700RH and project code TP1. The original required delivery date is August 5, 2026, and the item is classified as a non-NSN item under NAICS code 334511, with the procurement managed by the CCAD Detachment under the Department of Defense.
CCAD DETACHMENT

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
PLUG, EAR
Solicitation # SPE2DS-26-T-324L
The product is a hypoallergenic medical-grade polymer ear plug, designated as NUDE, intended for medical use and subject to stringent procurement standards under the Federal Acquisition system. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transit by common carriers at the lowest applicable rate, with export packaging required when necessary. All items must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and markings must be applied per this standard, available through DLA Troop Support. The unit of issue is a box containing 25 pairs, with a total order quantity of 10 boxes, or 250 pairs. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies in accordance with RQ011, and packaging must adhere to DLA’s procurement packaging guidelines. The contract has a 20-day delivery window after award and carries the NSN 6515-01-606-4565 under solicitation SPE2DS-26-T-324L, issued by the Department of Defense’s Medical Supply Chain, with bids due by August 17, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
INTERCONNECTING BOX
Solicitation # SPE4A7-26-T-632R
The contract is for the procurement of an Interconnecting Box under solicitation SPE4A7-26-T-632R, with a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required FOB origin within 166 days, with no variance allowed in quantity. The item is identified by NSN 5895-01-579-4045 and must comply with DLA packaging requirements per MIL-STD-2073-1E, including packaging code U, E5 unit containers, and marking in accordance with MIL-STD-129. Bare items must be marked with the contract number, NAWC CAGE code, and part number per technical drawings, with no special marking required. The supplier must meet DLA’s technical and quality requirements as referenced in the DLA Master List, and all inspections and acceptances occur at origin. Sampling follows MIL-STD-1916 or comparable zero-based plans with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively, and zero non-conformances are required unless otherwise stipulated. Mercury and mercury-containing compounds are prohibited except in specific functional components like batteries or instruments, which must meet NAVSEA 5100-003D containment standards. The item is designated a Critical Application Item and must comply with NAVAIR aircraft launch and recovery equipment traceability requirements. The supplier must hold a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and follow configuration change management and variance procedures. All documentation, including Source Approval Requests, must adhere to specified DLA standards. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping and transportation governed by DLAD procedural notes. The original required delivery date is March 24, 2027, with a need ship date of January 31, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
IMAGE INTENSIFIER T
Solicitation # SPE4A6-26-T-14QM
The contract pertains to the procurement of one Image Intensifier T with NSN 5855-01-706-0138 and part number BNG-020-A21, issued under solicitation SPE4A6-26-T-14QM by the Department of Defense’s ASC Commodities Division. Delivery is required within 376 days from the contract award, with FOB origin terms and no variance in quantity allowed. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including prescribed methods for preservation, wrapping, and containerization, with no special marking required. The item is subject to DLA packaging requirements and must be palletized accordingly. Compliance with technical and quality requirements referenced by R and I numbers from the DLA Master List is mandatory. The contractor must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and handle Covered Defense Information appropriately. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated. Measuring and test equipment used must meet RT001 standards, and removal of government identification from non-accepted supplies is required. The unit of issue is each, and shipment must align with DLA Procurement Notes C19 and C20. All technical specifications, quality controls, and delivery directives are binding and must be met prior to the required delivery date of August 29, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CANISTER ASSEMBLY, SUCT
Solicitation # SPE2DS-26-T-323G
The contract specifies the procurement of a disposable surgical suction canister assembly with a 300 mL capacity, featuring a sealed design, internal filter, and blue connection fittings, all constructed from plastic and including a 3-foot tubing. The item is identified by NSN 6515-01-620-9271 and is regulated by the FDA, requiring bidder information including manufacturer part number and source to be submitted for FDA referral confirmation. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, ensuring protection against damage and safe transport via common carriers at the lowest cost to the designated delivery point at Cannon AFB, New Mexico. All packaging and marking must adhere strictly to DLA guidelines, and the contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE2DS-26-T-323G, with a response deadline of August 17, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4663
This contract specifies the procurement of a power supply under solicitation SPE7L7-26-T-4663, with a total quantity of 33 units to be delivered within 70 days to the DLA Distribution San Joaquin facility in Tracy, California. The item, identified by NSN 6130-01-552-9154 and part number 68-09762-003, is designated as a critical application item and must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129P, including specific requirements for containment, wrapping, and marking with no special marking codes. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The contract enforces zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with attributes assigned strict verification levels or AQLs, and prohibits intentional addition of mercury or mercury-containing compounds except in specified functional exceptions such as certain batteries, lights, or instruments, which must include secondary containment per NAVSEA guidance. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List. The acquisition is a total small business set-aside under NAICS code 334511, with the original required delivery date set for July 11, 2026, and a need ship date of May 5, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268D
The contract involves the procurement of two gas detectors identified by NSN 6665-01-608-4910 under solicitation SPE7M1-26-T-268D, with a required delivery within 20 days after award. The solicitation was issued on August 9, 2026, and responses must be submitted by August 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined based on the acquisition size and timing of amendments. For simplified acquisitions, the version in effect on the solicitation issue or award date applies, while large acquisitions follow the RFP issue date unless an amendment supersedes it. The alternate offeror must provide a complete data package including specifications for both the approved and alternate parts. The contracting agency is the Department of Defense through the Maritime Supply Chain office, with Michael Reese as the primary point of contact, reachable via email and phone. The NAICS code 334511 indicates classification within the instrumentation manufacturing sector, and the performance location is not specified beyond the United States.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
VALVE, RESUSCITATOR
Solicitation # SPE2DS-26-T-323L
The valve, resuscitator is a single-use barrier system designed for respiratory resuscitation, featuring three distinct filtration layers and a one-way duck bill valve to prevent contamination and ensure unidirectional airflow. It includes top and bottom ports and is adjustable between 5 to 20 cm H2O to accommodate varying patient needs. The device conforms to the ISO standard 22mm internal diameter connector, enabling universal compatibility with any resuscitation bag flow diverter that has a matching 22mm connection. Each unit is individually packaged to maintain sterility and readiness for immediate use. The unit of issue is a box of ten, with a minimum shelf life of 60 months from the manufacturer’s date, and no more than nine months may have elapsed between manufacture and delivery to the government to ensure optimal product integrity. The product is identified by NSN 6515-01-620-0444, with a procurement quantity of 11 boxes under purchase request 7017798103. Delivery is required within 70 days after order date. The solicitation, numbered SPE2DS-26-T-323L, was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF. The point of contact is Elizabeth Cruz, reachable via email and phone. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific references to RA001, RP001, and RQ011 covering technical standards, packaging, and removal of government identification from non-accepted supplies. The place of performance is specified as APO, ZIP 96260-5479, and the NAICS code 334511 classifies the product under medical equipment manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268G
This contract solicits two gas detectors under NSN 6665-01-627-8701 from Teledyne FLIR Unmanned Ground Systems and Honeywell Analytics Inc. with part numbers 4465401K and GVC03-0912-001 respectively, requiring full compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, including specific handling codes for dry storage, non-extendable 12-month shelf life, and hazardous materials labeling per OSHA’s Hazard Communication Standard and 29 C.F.R. 1910.1200. Suppliers must submit approved Safety Data Sheets and compliant hazard labels prior to award and ensure employee training on updated chemical communication requirements, with items subject to inspection and acceptance at destination and no variance allowed in quantity. The item is classified as a critical application with potential battery content and must meet CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment requirements. Delivery is FOB origin within 20 days of contract award, with the final destination being Misawa Air Base in Japan and the required delivery date set for August 10, 2026, under solicitation SPE7M1-26-T-268G. Packaging must adhere to DLA procurement guidelines and RP001 standards, with no special marking required and palletization following DLA guidelines. Transportation logistics reference DLAD procedural notes C19 and C20, and all materials must be shipped using the authorized DoD unit of issue. The contract is managed by the Department of Defense’s Maritime Supply Chain under NAICS 334511, with Michael Reese as the primary point of contact, and bids are due by August 20, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
HANDLE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-325V
The contract solicits a small pediatric laryngoscope handle made of chrome-over-brass, designed for use with a fiber optic laryngoscope blade and powered by a AA battery, with a unit of issue of one each. The item is identified by NSN 6515-01-396-4249 and is requested in a quantity of one unit for delivery within 20 days of award. The solicitation, numbered SPE2DS-26-T-325V, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 339112 for medical equipment manufacturing. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Laughlin AFB, Texas, and the primary point of contact is Michael Small. Bidders must specify the source and part number being offered and are required to comply with all referenced technical and quality specifications from the DLA Master List, packaging standards, and procedures for removing government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-324C
The contract specifies the procurement of a sterile disposable intravenous catheter and needle unit in 18 gauge size with a 1.25 inch length, identified by NSN 6515-01-718-5456 and packaged in boxes of fifty. The product must meet stringent shelf-life requirements, including a non-extendable 36-month shelf life from the date of manufacturer, with no more than five months elapsed between the manufacture date and delivery to the government. All packaging and labeling must comply with the latest revision of MMS1A, clearly displaying the date of manufacture, expiration or retest date, and the contract and lot number. The item is classified as a TYPE I (CODE Q) item under RS020 and must adhere to DLA packaging standards and other technical and quality requirements referenced in the DLA Master List. The contract requires bidders to clearly identify the source and part number being supplied and mandates removal of government identification from non-accepted supplies. Delivery is required within five days of award, with the place of performance specified as Fort Lewis, Washington. The solicitation was issued on August 9, 2026, with responses due by August 17, 2026, under contract number SPE2DS-26-T-324C, managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
DEFIBRILLATOR TEST, DIS
Solicitation # SPE2DS-26-T-323X
The contract pertains to the procurement of a defibrillator test and discharge resistor with two leads, specifically designed for discharging capacitors in the defibrillation circuit of the ZOLL PROPAQ MD device, used exclusively for troubleshooting purposes. The item is issued individually, with a single unit required under the NSN 6515-01-691-7585, and must be delivered within 20 days of award. Bidders are required to clearly state the source and part number being supplied to ensure compatibility and compliance with technical specifications. The solicitation, identified as SPE2DS-26-T-323X, is issued by the Department of Defense under the Medical Supply Chain MD Surg Fsf, with performance to occur at Scott AFB, Illinois. It incorporates technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must meet DLA standards, and government identification must be removed from rejected supplies. Covered defense information may apply, and all responses must be submitted by the deadline of August 17, 2026. Point of contact for inquiries is Brooke Webb, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-325A
The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
Family Planning Centers

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, COMPRESSION, T
Solicitation # SPE2DS-26-T-323C
This item is a sterile, flat-fold compression dressing designed for one-handed use in emergency trauma situations involving arterial bleeding and severe hemorrhaging in limbs. It features a 4-inch wide by 60-inch long elastic bandage and an 8-inch wide by 10-inch long absorbent pad, all packaged in a compact 4-inch by 6-inch by 0.6-inch unit weighing 3.6 ounces. The dressing meets TAA compliance standards and is intended for immediate, effective application under any condition to control life-threatening bleeding. Each unit is individually wrapped and must have a minimum 60-month shelf life, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6510-01-598-8418 and is being procured in quantities of 20 units under solicitation SPE2DS-26-T-323C, with a delivery deadline of 20 days after award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain division, with performance occurring at Fort Drum, New York. Technical and packaging requirements are governed by DLA’s Master List, and government identification must be removed from any non-accepted supplies. The contract point of contact is Kendall Jones at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL KNIF
Solicitation # SPE2DS-26-T-324X
The contract specifies the procurement of 3 packages, each containing 10 detachable surgical knife blades, totaling 30 units, under NSN 6515-01-538-8302, with delivery required within 5 days FOB destination to Camp Pendleton, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any general standards like ASTM D3951, and must adhere strictly to Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport by common carrier at the lowest cost. The blades must include a safety locking system for maximum protection during handling and use. Marking and labeling must follow MMS No. 1 guidelines, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The contract requires zero variance in quantity, with inspection and acceptance occurring at the destination. The solicitation number is SPE2DS-26-T-324X, with a response deadline of August 17, 2026, and the item is classified under NAICS code 339112 for surgical appliance and supply manufacturing. The delivery point is governed by government addresses provided, and the order is subject to covered defense information protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details