NEEDLE, SAILMAKER'S

NEEDLE,SAILMAKER'S
NEEDLE,UPHOLSTERER'S
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA
.
NSN 8315-00-163-1545; PGC11898
.
ITEM NAME: ,,NEEDLE,UPHOLSTERER'S
PART NUMBER: ,,A-A-55306
CAGE CODE: ,,58536
.
Shall be in accordance with (IAW) Commercial Item Description (CID) A-A-55306, NEEDLE,SAILMAKER’S dated 29 January 1997. . For use by sailmakers for sewing and repairing canvas. . Material: Forged or cast steel Standard Needle Industry Size Number: 10 Overall Length: 3.75 inches ± 0.19 (3/16) inches; 3.56 inches minimum to 3.94 inches maximum Shape: Triangular point and straight shank Procurement Group Code (PGC): 11898 . Unit of issue is a PACKAGE (PG) containing 25 EACH (EA). . 1 PG = 25 EA . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . Please note a Certificate of Compliance (CoC) may be submitted in lieu of physical testing and the certified test reports, provided the total cost of the contract does not exceed $100,000 (per page 14/45 of the DLA Troop Support Additional Quality Assurance Requirements dated August 2021) . Please note, however, use of the CoC in lieu of submitting the certified test reports, is subject to approval by the Contracting Officer identified on the solicitation, purchase order, and/or the contract. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT
SPE1C1-26-T-0853
SECTION B
BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT
WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP
SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION
TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS
RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)>
EXAMINATION, AND TEST REQUIREMENTS SPECIFIED
HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT.
THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY
OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS
DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES
CONFORM TO PRESCRIBED REQUIREMENTS.
.
RT001: MEASURING AND TEST EQUIPMENT
.
LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE
. Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.
Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial NSN/Part Number: 8315-00-163-1545 Quantity: 80 PG Purchase Request: 7016074214QTY: 160 Delivery: 83 days ADO