Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

New Inert Atmosphere Laboratory Glove Box

Active
26-58153International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council Canada (NRC) is seeking proposals for the acquisition, delivery, installation, and commissioning of a new inert atmosphere laboratory glove box system to support quantum dot synthesis. The system must provide a controlled environment with oxygen and moisture levels ideally below 1 ppm and include a main chamber, stand, gas purification system, and at least two electrical power connections for a hotplate and analytical balance. The contract is for an initial one-year term starting March 31, 2027, with an irrevocable option to extend for up to two additional one-year periods. All deliverables must be received by March 31, 2027, at the NRC facility in Ottawa, Ontario. This open tender is subject to the Policy on Reciprocal Procurement, limiting eligibility to Canadian suppliers and those from applicable trading partners. The contract will be awarded to the responsive bidder who meets all mandatory technical criteria and offers the lowest evaluated price. Proposals must be submitted as separate technical, financial, and certification volumes, including declarations regarding employment equity, reciprocal procurement, and the ineligibility and suspension policy. The contractor is required to adhere to strict green procurement standards for packaging and must certify that the work is not produced using forced labour. All invoices must be submitted electronically to the designated NRC email address.

General Info

NRC seeks proposals for an inert atmosphere glove box system for quantum synthesis.

Documents

5

NPP - New Inert Atmosphere Laboratory Glove Box (26-58153)

PDF, High priority: read this firstrfp
High

Solicitation 26-58153: Inert Atmosphere Laboratory Glovebox

PDF, High priority: read this firstrfp
High

Solicitation 26-58153: Inert Atmosphere Laboratory Glovebox

PDF, High priority: read this firstrfp
High

Solicitation 26-58153: New Inert Atmosphere Laboratory Glove Box

PDF, High priority: read this firstrfp
High

Solicitation 26-58153 - New Inert Atmosphere Laboratory Glove Box Q&A

PDF, Low priorityq-and-a
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts
Helen TranContracting Authority

Full Description

Show more
Title: New Inert Atmosphere Laboratory Glove Box Solicitation Number: 26-58153 Publication Date: October 1, 2026 Closing Date and Time: October 26, 2026 at 2:00 PM EDT Trade Agreements: Canadian Free Trade Agreement (CFTA) (formerly Agreement on Internal Trade [AIT]) Region of Opportunity: Canada Region of Delivery: Ottawa, ON GSIN: N6640 Notice Type: Request for Proposal (RFP) Tendering Procedure: Open Description: The National Research Council Canada (NRC) requires a New Inert Atmosphere Laboratory Glove Box. The contract period will be for one year from the date of contract with an irrevocable option to extend it for up to two additional one-year periods. The anticipated start date is March 31, 2027. All the deliverables must be received on or before March 31, 2027. Solicitation of Offer Submission Eligibility. This solicitation of offers is subject to the Policy on Reciprocal Procurement. This means that only Canadian Suppliers and Suppliers of an Applicable Trading Partner, are eligible for this solicitation of offers. Offers submitted by Suppliers of a Non-Trading Partner will be rejected. Basis of selection: The responsive bidder who meets all Mandatory Technical Criteria and offers the lowest price will be recommended for contract award. Tenders must be submitted to the NRC Bid Receiving Unit at: NRC.BidReceiving-ReceptiondesSoumissions.CNRC@nrc-cnrc.gc.ca Refer to the attached tender documents to obtain further information. Canada retains the right to negotiate with any supplier on any procurement. Documents may be submitted in either official language of Canada. Procuring Office: Helen Tran, Senior Procurement Officer, NRC, 236-464-0827, helen.tran@nrc-cnrc.gc.ca The NRC has adopted the Integrity Regime administered by Public Services and Procurement Canada. As a result, the integrity provisions are being applied in NRC contracting activities as outlined in this solicitation. Canada will make available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at https://canadabuys.canada.ca/en/tender-opportunities . Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties. In the event an NPP, bid solicitation or related documentation would be amended, Canada will not be sending notifications. Canada will post all amendments, including significant enquiries received and their replies, using GETS. It is the sole responsibility of the Bidder to regularly consult GETS for the most up-to-date information. Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party. Indigenous Procurement: The federal Indigenous Business Directory (IBD) is an online resource for all levels of government and the private sector to identify Indigenous business capacity. Having a business profile in the IBD will increase your company’s visibility and may provide additional business. A profile in the IBD can also allow you to compete for federal government contracts that are set-aside for Indigenous businesses through the Procurement Strategy for Indigenous Businesses. For more information and to review eligibility criteria and register, visit: www.canada.ca/indigenousbusinessdirectory.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
WATERS TECHNOLOGIES DYNAMIC MECHANICAL ANALYZER
Solicitation # 80NSSC27946703Q
The NASA Shared Services Center is seeking to acquire a TA Instruments DMA 850 dynamic mechanical analyzer and associated equipment to support flight and research projects involving dynamic mechanical analysis, creep testing, and fatigue testing of coupons. The procurement includes the analyzer, a standard furnace, filter/regulator, penetration probe and stage, gas cooling accessory upgrade kit, computer, monitor, and a loyalty support plan. The contractor is also required to provide installation and operator training. The equipment must meet specific technical standards, including a dynamic frequency range of 0.001 to 200 Hz, a load capacity up to 18 Newtons with 0.001 Newton resolution, and a displacement up to 25 mm with 0.1 nm resolution, all while maintaining environmental temperature control. This effort is being conducted as a sources-sought notice under NAICS code 334516, with the government intending to issue a sole source contract to Waters Technologies Corporation under FAR 12.102(a), as they are the sole provider of the required equipment. Performance will take place at the NASA Goddard Space Flight Center in Greenbelt, Maryland, with a required delivery lead time not to exceed 60 days from purchase. The acquisition follows FAR Part 12 for commercial items and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman. Interested organizations must submit capability statements to the primary point of contact, Cara Craft, by October 20, 2026.
NASA Shared Services Center

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
LT-SPM
Solicitation # BSA475591
Brookhaven Science Associates, LLC, operating Brookhaven National Laboratory for the Department of Energy, is soliciting quotations under RFQ 475591 for the design, fabrication, and installation of a Low-Temperature Scanning Probe Microscope (LT-SPM). This Firm Fixed Price contract, categorized under NAICS 334516 for non-commercial items, requires the integration of an LT-SPM into an existing multiprobe ultra-high-vacuum surface analysis system to enable scanning tunneling microscopy from 5 K to 500 K and atomic force microscopy at approximately 5 K. Key deliverables include a new SPM scanner, a sample stage with seven electrical contacts, a removable magnetic field assembly, and necessary internal electronics. The estimated contract value is 212,600 USD. The procurement process has undergone several amendments, with the final quotation deadline set for October 23, 2026, at 4pm Eastern Time. Award will be granted to the responsive and responsible offeror providing the lowest total price while meeting all technical requirements. Mandatory qualifiers for offerors include ISO 9001 certification or an equivalent quality system, a US-based service engineer network, and references for at least three successfully delivered LT-STM/QPlus AFM systems of comparable complexity. Performance timelines include design completion within 3 weeks after receipt of order, fabrication and delivery by 29 weeks, and on-site installation between weeks 37 and 42. Shipping must be FOB BSA National Laboratory, Freight Prepaid, adhering to ASTM Standard D 3951-10 packaging guidelines.
Brookhaven National Labor -Doe Contractor

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 334515
New
International
Fast and High-resolution Oscilloscope
Solicitation # 26-58164
The National Research Council of Canada is soliciting offers for the purchase of one new, current-production, real-time mixed-signal oscilloscope. This equipment is required for a pulsed-mode measurement set-up to characterize quantum cascade lasers and extract key parameters at cryogenic temperatures. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria. All equipment must be delivered to the National Research Council Canada Building M50 in Ottawa, Ontario, on or before March 31, 2027, under Incoterms 2020 DAP. The contract term extends from the date of award until one year after delivery and acceptance. The successful contractor must adhere to strict compliance standards, including Canada's Code of Conduct for Procurement, the Ineligibility and Suspension Policy, and the Canadian Electrical Code Part 1. Packaging must be environmentally preferable, utilizing materials that are reusable, returnable, or recyclable. Proposals must be submitted electronically by November 13, 2026, divided into technical, financial, and declaration sections. Payment for undisputed invoices will be made within 30 days of receipt. Security requirements are governed by the Security Requirements Check List, and the procurement is classified as unclassified.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 335999
New
International
Uninterruptible Power Supply (UPS)
Solicitation # 26-58072-B
The National Research Council Canada (NRC) is issuing Request for Proposal 26-58072-B for the procurement of one Uninterruptible Power Supply (UPS) system to support Biologic BCS-815 battery cyclers at the NRC Boucherville laboratory in Quebec. This solicitation is a reissue that cancels and supersedes solicitation 26-58072. Under the Policy on Reciprocal Procurement, eligibility is restricted to Canadian Suppliers Partners. The contract will be awarded to the compliant offer with the lowest evaluated price. The final delivery of the equipment to Boucherville, Quebec, must be completed by March 31, 2027, with the overall contract term extending to that date. To be considered compliant, the UPS must meet several mandatory technical criteria, including a minimum rated power of 15 kW, three-phase input and output voltage of 208 V at 60 Hz, and a minimum runtime of 5 minutes at 100 percent rated output load. The system must operate within an ambient temperature range of 0 to 40 degrees Celsius and not exceed maximum dimensions of 60 cm width, 100 cm depth, and 170 cm height. Additionally, the equipment must feature a visible approval certification label from a body accredited by the Standards Council of Canada and comply with Part 1 of the Canadian Electrical Code. Offers must be submitted electronically by October 16, 2026, at 14:00 EDT, divided into three distinct sections: a technical offer, a financial offer, and the required submission and declaration forms. Financial information must be kept exclusively within the financial proposal to avoid non-compliance. Packaging must align with the Policy on Green Procurement, utilizing reusable, returnable, or recyclable materials. Payment will be made via direct deposit, EDI, or wire transfer within 30 days of receiving an undisputed invoice.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS