Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

New Manufacture - LINER,AUGMENTOR COM - 2840014559138NZ - F100 Engine

Active
SPRTA122R1048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of liners for the Augmentor Component of the F100 engine, identified by NSN 2840014559138NZ and part number 4084791. The estimated quantities total 154 units distributed among different designations (DPK002, DPT006, DEG005, and DCI002), with deliveries destined for Foreign Military Sales (FMS). The contract includes a first article testing requirement where three units must undergo contractor testing. This acquisition is controlled for export, requires qualification of sources, and does not accept surplus or overhauled materials. It is a total small business set-aside and follows a non-competitive acquisition approach due to the limited number of responsible sources able to meet the specification, in accordance with FAR guidelines and statutory authority. The solicitation was issued on January 27, 2022, with a closing date of February 26, 2022, and offers must be submitted electronically, with no hard copies provided. While the government does not intend to compete broadly, all responses within the specified timeframe will be considered to assess whether competition is feasible. Contract award will factor in price, technical capability, and past performance. An ombudsman has been designated to address concerns from potential offerors confidentially during proposal development. Questions and communications are directed to the contracting officer at Tinker Air Force Base. The solicitation and relevant documents are accessible on the SAM.gov website.

General Info

Procurement of 154 F100 engine liners for FMS; small business set-aside, testing required.

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

OK, USA

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhasePresolicitation
Posted

Presolicitation

Notice updated

The notice description changed.

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Office AddressTINKER AFB, OK, 73145-3070, USA

Full Description

Show more
PRE-SOLICITATION NOTICE - SPARES PURCHASE PR NUMBER: FD2030-21-01048 SOLICITATION NUMBER: SPRTA1-22-Q-1048 EST. SOLICITATION ISSUE DATE: 27 JAN 2022 EST. SOLICITATION CLOSING DATE: 26 FEB 2022 AMC: 1/C ITEM DESCRIPTION (NOUN): LINER, AUGMENTOR COM (F100) NSN: 2840014559138NZ P/N: 4084791 CURRENT BEST EST. QUANTITY: 78 EA - DPK002, 45 EA - DPT006, 30 EA - DEG005, 1 EA - DCI002 DESTINATION: FMS (See above FMS destinations) REQUIRED DELIVERY: TBD FIRST ARTICLE REQUIREMENT: YES, Contractor Test (3 EA - 1 EA expended, 2 EA Part of Production + Test Plan and Test Report) CEMS REQUIREMENT: NO QUALIFICATION REQUIREMENTS: YES EXPORT CONTROLLED: YES SURPLUS/OVERHAULED MATERIAL ALSO SOLICITED: NO PURCHASE HISTORY: SPRTA121C1985; 13 SEP 2021; ACMT, Inc.; CAGE 0JWE8 In accordance with FAR 5.207(c)(16)(ii), all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation regarding eligible sources (e.g. if this is a small business set aside foreign sources may not participate as prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in FAR Part 12 (acquisitions of commercial items) in its solicitation for the described supplies. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the contracting officer for this contract and until the contractor receives notice of such availability, to be confirmed in writing by the contracting officer. Authority: 10 U.S.C. 2304(c)(1). Justification: supplies required are available from only one or a limited number of responsible sources and no other supplies will satisfy agency requirements. The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 60 days (30 days if the award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price, technical and past performance factors as detailed in the solicitation. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the ombudsman at +1 (555) 000-0000, facsimile +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download at sam.gov no earlier than 15 days after the posting of this notice. Questions concerning this synopsis or subsequent solicitation can be directed to the Contracting Officer, Kevin Howe +1 (555) 000-0000, contact@example.gov.

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
BELLOWS, PRESSURE
Solicitation # SPE7L3-27-T-1580
Solicitation SPE7L3-27-T-1580 is a small business set-aside procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 21 units of pressure bellows, identified by NSN 3010012005475 and Woodward Inc. part number 5216-146. This critical application item is classified as a commercial product under NAICS code 336412. The contract specifies a delivery timeline of 666 days after order, with a need ship date of September 6, 2028, and an original required delivery date of May 24, 2029. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical requirements take precedence. Palletization must comply with RP001. Key regulatory requirements include a prohibition on Class I ozone-depleting chemicals and mandatory compliance with CMMC Level 2 self-assessment and NIST SP 800-171 standards for cybersecurity. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
HOUSING ASSEMBLY
Solicitation # SPE4A5-27-T-2088
Solicitation SPE4A5-27-T-2088 is a request for quotation issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of one Housing Assembly, identified by NSN 2840001690069 and part number 3020137. This is a Foreign Military Sales requirement for Turkey, with a required delivery date of October 27, 2026, and a delivery lead time of 20 days after order. The item is designated as a critical application item, and the contract specifies FOB Origin terms. Shipping is coordinated through A.J. Worldwide Services in Secaucus, New Jersey, for final delivery to the 5th Main Maintenance Factory Directorate in Guvercinlik, Turkey. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement is governed by a variety of FAR and DFARS clauses, including those related to cybersecurity, safeguarding covered defense information, and the prohibition of hexavalent chromium.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336412
New
Federal
Multiple NSNs for OEM Pratt & Whitney, addition to Pacer Talon Long Term Contract_End_Item_F100_NSN_Multiple NSNs_PN_Multiple PNs
Solicitation # SPE4AX27R0005
The Department of the Air Force, specifically the 421st SCMS at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis (Notice ID SPE4AX27R0005) to identify potential sources for the procurement of new spares for the F100 platform. This effort is an addition to the Pacer Talon Long Term Contract and focuses on the manufacture of multiple National Stock Numbers (NSNs) for OEM Pratt & Whitney. The specific requirements include 373 units of PN 4089078-03, 7 units of PN 4079076, 7,054 sets of PN 4085092, 1,123 units of PN 4083716-01, and 15 units of PN 4088313. Potential sources must be capable of providing all labor, materials, and equipment for the manufacture, inspection, testing, packaging, and shipping of these items. This is not a formal solicitation, and no funds are currently available for the information requested. The government is using this process to determine the best acquisition strategy and to evaluate if the requirement should be a competitive bid or a Small Business Set-Aside. Interested vendors, including large and various small business categories under NAICS code 336412, must submit their business information and a Source Approval Request (SAR) package via DoD SAFE by November 28, 2026. Qualification requires adherence to Manufacturing Qualification Requirements (MQR) and Engineering Data Lists (EDL), and vendors may be responsible for nonrecurring engineering costs to become an approved source. Performance will take place at Tinker AFB, Oklahoma.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS