NIPPLE, TUBE

NIPPLE,TUBE
NIPPLE, TUBE. CADMIUM PLATED STEEL MATERIAL.
A LOCKHEED LICENSE AGREEMENT 11 RESTRICTED TECHNICAL DATA PACKAGE EXISTS
FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION CONDTIONS APPLY.
VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN THE "11 LOCKHEED
C-5" LICENSE AGREEMENT FOLDER AVAILABLE AT
https://tdmt.dla.mil/TDMT/Client
FULL AND OPEN COMPETITION APPLY
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) DRAWING NOTES: 201416605 Reference MRB statement 5.1.1" ESTDCP01 LIMITED DRAWING.
ENGINEERING NOTES APPLY:
1. Use ds5173 for fitting end specifications
2. Material specification and general requirements iaw stsps003
When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation. Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity. Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein. Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel. When prime design source specifications require or provide for participation by that prime source quality<(>,<)> manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance. The contractor is responsible for assuring that all dimensions<(>,<)> conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by
SPE7M3-27-T-1135
SECTION B
themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such.
NOMINAL THREAD SIZE IS 0.438 INCHES W/ CLS 3 THDS. Exception Data: 1. 201416605 LANDING GEAR REQUIREMENTS DOCUMENT "Reference MRB statement 5.1.1" 2. ESTDCP01 CLEANING AND PACKAGING STANDARD FOR FLUID SYSTEM L is a LIMITED DRAWING and will be FURNISHED BY PCO UPON REQUEST. NOTE TO ALL SUPPLY CHAIN PERSONNEL: THE ENGINEERING NOTES ARE PROVIDED ON AIR FORCE DRAWING 201416605, CAGE CODE 98747, AND ADVANCED ENGINEERING SUPPLEMENTAL ORDER(S) (AESO'S). THE HILL AFB FORM 462<(>,<)> ENGINEERING DATA REQUIREMENTS (ATTACHMENT A / ENGINEERING NSN/Part Number: 4730-00-613-8557 Quantity: 333 EA Purchase Request: 7019029327QTY: 333 Delivery: 93 days ADO