Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

NIST Boulder Building 4 Generator and ATS Replacement

Active
1333ND26RNB190034Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Institute of Standards and Technology (NIST) at its Boulder Campus is seeking a firm-fixed-price contractor to remove and replace the existing standby emergency generator and Automatic Transfer Switch (ATS) serving Building 4. The contractor must supply all labor, materials, equipment, supervision, and incidentals required to remove the old systems and install a new standby emergency generator capable of operating on both natural gas and diesel fuel, along with a compatible ATS. The scope includes all associated electrical modifications, conduit and wiring installation, testing, commissioning, and documentation, all in strict compliance with the Statement of Work, applicable national codes and standards, and NIST’s own site-specific requirements. The project aims to ensure uninterrupted emergency power supply for critical operations within the building. The solicitation, identified as 1333ND26RNB190034, was posted on July 10, 2026, and is a Total Small Business Set-Aside under NAICS code 238210. A mandatory site visit is scheduled for July 23, 2026, at 1 p.m. in Building 4, following a list of individuals approved for the visit on July 21, 2026. Questions from prospective bidders must be submitted by July 30, 2026, and proposals are due no later than August 12, 2026. The contract will be performed at the Boulder, Colorado location, with primary point of contact Lauren Lopez and secondary contact Travis Zoellner available via email for inquiries. The official solicitation can be accessed through the SAM.gov portal.

General Info

Remove and replace emergency generator and ATS at NIST Boulder with dual-fuel capability, compliant with codes and site requirements.

Agency

Department Of Commerce NistView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Boulder, CO, 80305, USA

Set-Aside

SBA

Documents

(3)

Section+J+Attachments.zip

ZIP

Solicitation 1333ND26RNB190034 - Building 4 Generator and ATS Replacement

PDFrfp

1333ND26RNB190034+001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseCombined Synopsis
Posted

Combined Synopsis

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Nist
Contacts1 person available
OfficeGAITHERSBURG, MD, 20899, USA
Organization / Agency
Department Of Commerce Nist
View Agency Profile
Office AddressGAITHERSBURG, MD, 20899, USA
Contacts
Travis Zoellner Contracting Officer

Full Description

Show more

The National Institute of Standards and Technology (NIST), Boulder Campus, intends to solicit a firm-fixed-price contract for the removal and replacement of the existing standby emergency generator and Automatic Transfer Switch (ATS) serving Building 4. The contractor shall provide all labor, materials, equipment, supervision, and incidentals necessary to remove the existing generator and ATS, furnish and install a new standby emergency generator (with natural gas and diesel options) and compatible ATS, perform all associated electrical modifications, conduit and wiring installation, testing, commissioning, and documentation in accordance with the Statement of Work, applicable codes and standards, including NIST Site Standards.


Important Dates:


List of Individuals Due for Site Visit: Tuesday, July 21, 2026


Site Visit: Thursday, July 23, 2026 at 1pm, Building 4


Questions Due: Thursday, July 30, 2026


Proposals Due: Thursday, August 27, 2026

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
Replacement Fiber Line
Solicitation # Replacement Fiber Line
The contract requires the replacement of existing multi-mode fiber optic cabling with a new 12-strand single-mode fiber optic cable system connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work includes removing retired multi-mode aerial fiber lines and splice boxes from utility poles and installing new 12-strand OS2 OSP fiber using center-owned poles, with specific equipment requirements including Belden FS3L0024NS fiber, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors or approved equivalents. All labor, tools, equipment, and materials are the contractor’s responsibility, except for SFPs, which will be provided by Job Corps. The project is structured as a fee-for-service contract with a lump sum pricing model, and the contractor must submit weekly or bi-weekly invoices detailing purchase order numbers, service dates, itemized pricing with extended totals, and invoice references. The place of performance is clearly defined at the Job Corps Center, and acceptance occurs upon delivery at the MTC-designated point after final inspection, with the contractor warranting all work and materials to conform to specifications, be merchantable, of good workmanship, and free from defects. The solicitation is limited to small business set-asides including SBA-recognized categories such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238210 and a size standard of $19.0 million. The contractor must comply with Service Contract Labor Standards under WD# 2015-4687 (Rev 31), the Contract Work Hours and Safety Standards Act for overtime compensation, and DBA wage requirements, with full responsibility for ensuring subcontractors adhere. Compliance with FAR clauses includes reporting executive compensation, clauses incorporated by reference from February 1998, and data rights provisions. First-tier subcontractors exceeding $30,000 must disclose debarment status, and all contractors must provide proof of insurance with $1 million per occurrence/$3 million aggregate general liability, $1 million auto coverage, and $500,000 workers’ compensation, naming MTC as the certificate holder and additional insured. The contractor must indemnify MTC against liabilities arising from their
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
Federal
CA-MERCED NWR-Solar Distribution Panel Replacement
Solicitation # 140FC326Q0046
The U.S. Fish and Wildlife Service is soliciting bids to replace a failed 400-amp solar electrical panel and associated components at the Merced National Wildlife Refuge, located at Hwy 140 Snowbird Lane in Livingston, California. The project is critical to restoring reliable power for a deep well system that supports groundwater pumping, wetland water level regulation, and wildlife habitat management. The new electrical distribution panel and related equipment must meet all applicable codes and standards, ensuring safe, long-term operation of the solar-powered infrastructure. The estimated project cost ranges between $15,000 and $25,000, and the work must be completed within 60 calendar days after contract award. This is a total small business set aside under NAICS code 238210 with a size standard of $19 million, and only registered small businesses in SAM.gov are eligible to respond. The solicitation requires a firm-fixed-price contract based primarily on price, with bidders expected to demonstrate proven experience in solar installation, familiarity with common solar brands, and full compliance with California state and local regulations. All proposals must be submitted on company letterhead with a completed Pricing Form, SAM.gov UEI code, and contact information, and must include the FAR provisions 52.212-1 and 52.212-4 with applicable sections filled out. Due to the project value exceeding $150,000, both payment and performance bonds are required within ten calendar days of award. Proposals must adhere to strict formatting standards: 8.5 x 11 inch pages, 12-point font, one-inch margins, and no decorative elements. All questions must be emailed to terrence_anderson@fws.gov with the solicitation number included, and site visits must be scheduled in advance. The deadline for submissions is August 28, 2026, at 12:00 pm PST.
Fws Construction & A/e - Bil/disaster

POSTED

about 6 hours ago

DEADLINE

in 22 days
View Details
NAICS: 238210
New
Federal
Audio System Modernization
Solicitation # 030ADV26R0049
The Library of Congress is seeking a contractor to modernize the audio system in the historic Coolidge Auditorium, a 485-seat venue originally built in 1925 for chamber music performances. The existing analog infrastructure, upgraded in the 1990s but now largely inoperable, is being replaced with a fully digital audio system to eliminate the need for portable equipment and visible cable runs, while preserving the auditorium’s original acoustics. The scope includes a comprehensive site survey, system design, removal of outdated components, installation of new hardware and technical furniture, programming, commissioning, and delivery of detailed wiring diagrams in PDF and DWG formats. The contract is firm-fixed-price with a base period of performance from September 29, 2026, through September 28, 2027, followed by a mandatory one-year warranty period. Key deliverables are defined in the Statement of Work and detailed in the Deliverables Price Schedule, though specific pricing figures are not provided in the solicitation and must be submitted by offerors. Proposals must be submitted in two separate volumes: a technical proposal containing the approach, corporate experience, and past performance, and a price proposal aligned with Attachment J-2. The evaluation is based on a best-value trade-off process where technical merit—including understanding of requirements, personnel qualifications, subcontracting plans, and corporate experience—combined significantly outweighs price. Only electronic submissions via email to designated contacts are accepted, with strict formatting rules including 8.5×11-inch pages, Times New Roman 12-point font, no hyperlinks, and no zipped or password-protected files. A mandatory site visit is required, and all proposals must be received by August 25, 2026. Performance must comply with stringent security protocols including NIST SP 800-53 for Controlled Unclassified Information, FIPS 140-3 encryption for data at rest and in transit, annual IT security training, and NDAs for all personnel. Key personnel must be CTS-certified with five years of relevant experience or ten years without certification. Deliveries to the Capitol Hill Campus require pre-notification, adherence to vehicle clearance limits, and U.S. Capitol Police authorization. Invoicing is exclusively through the Invoice Processing Portal, and all contractor activities must conform to Library-specific clauses covering government property, changes, disputes, prompt payment, whistleblower protections, ethics, and records management.
Contracts Services

POSTED

about 6 hours ago

DEADLINE

in 19 days
View Details
NAICS: 238210
New
Federal
N--NOAA Western Regional Center H32 Electrical Repair
Solicitation # 1305M326Q0317
The contract, identified by solicitation number 1305M326Q0317, is a small business set-aside for commercial construction services to perform electrical repairs at the NOAA Western Regional Center in Seattle, Washington. The scope encompasses demolition, installation, replacement, and testing of electrical systems across multiple hangar bays, including wiring, panels, lighting, emergency power circuits, and grounding upgrades, with a 6-month performance period beginning at Notice to Proceed. Amendment 0001, issued July 28, 2026, updated the Statement of Work for CLIN 0002 and added CLIN 0007, which includes new technical exhibit pictures in the attachments. All work must comply with OSHA standards, applicable building and electrical codes, and hazardous material handling protocols for asbestos, PCBs, and mercury, with strict packaging, labeling, and chain-of-custody requirements for contaminated materials. The contract requires submission of detailed technical documentation such as single-line diagrams, as-built records, and certification of no asbestos-containing materials, alongside a job-specific safety plan and a one-year work guarantee. The solicitation is issued as a firm fixed-price, all-or-none purchase order under a trade-off evaluation process where non-price technical factors—technical approach and capability, experience in electrical repairs, and past performance—are significantly more important than price; no numerical weighting is assigned among these three technical factors, but failure to provide two relevant references results in a neutral rating. Offerors must be certified small businesses registered in SAM with a valid UEI or CAGE code and must self-certify their size status. Personnel are subject to security screening based on contract duration—NACI for contracts over 180 days or SAC for shorter durations—with required forms submitted within three days of award. Contractors must designate a contract manager and alternate, provide proof of identity for site access, conduct a pre-mobilization site visit, and assume full liability for unanticipated conditions. Invoices must be submitted via the IPP system with Net 30 payment terms, and final acceptance occurs at the NOAA facility in Seattle with 100% compliance required for all deliverables. The government does not accept responsibility for non-receipt of quotes, and all submissions must be sent via email to Jamie.Rosales@noaa.gov with PDF or Word attachments.
Department Of Commerce Noaa

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 238210
New
Federal
RFQ 19MK8026Q0012 FAC- 7901- Tier III OEM Breaker Service & Replacement
Solicitation # 19MK8026Q0012
The U.S. Embassy in Skopje is soliciting quotations for Tier III OEM breaker service and replacement under RFQ number 19MK8026Q0012, with a response deadline of August 24, 2026, at 8:00 AM. The work is classified under NAICS code 238210 and is not subject to any set-aside provisions, meaning all eligible contractors may respond. Proposals must be submitted electronically via the completed SF-1442 form to the designated email address, with no oral submissions permitted, and email attachments must not exceed 20 MB in size. All contractors are required to be actively registered in the System for Award Management (SAM) database prior to submission, as mandated by FAR provision 52.204-7. The supplies must be of U.S. domestic origin unless otherwise specified by the vendor, and all representations and certifications included in the RFQ must be fully completed. The contract will be awarded based on the lowest evaluated price, and the government will not reimburse any costs incurred during the bidding process or guarantee a contract award. The place of performance is Skopje, North Macedonia, with a postal code of 1000, and all inquiries or submissions should be directed to Michael J. Fundahn, the primary point of contact at fundahnmj@state.gov, or Ivan Tashovski as the secondary contact at tashovskii@state.gov. The solicitation is accessible through the U.S. Embassy Skopje website, where the full RFQ document can be downloaded, and prospective bidders are advised to review all terms carefully before submitting. The office administering this procurement is part of the Department of State, headquartered in Washington, D.C., but the service and replacement work will be performed directly at the Embassy facility in Skopje. Failure to comply with submission requirements, including deadline, format, or SAM registration, will result in disqualification.
US Embassy Skopje

POSTED

about 6 hours ago

DEADLINE

in 18 days
View Details
NAICS: 238210
New
Federal
Response to Queries_19NP4026Q0027_Supply, Installation and Commissioning of UPS systems
Solicitation # 19NP4026Q0027
The U.S. Embassy in Kathmandu, Nepal, through the Department of State, is seeking qualified contractors to supply, install, and commission Uninterruptible Power Supply (UPS) systems at its facility located at 2976 Narayan Gopal Marg, Brahma Cottage, Maharajgunj, Kathmandu-3. This procurement is issued under solicitation number 19NP4026Q0027 with a NAICS code of 238210 classifying it under Electrical Contractors and Other Wiring Installation Contractors. The contract will be awarded on a firm fixed price basis, meaning the contractor assumes all cost risks and is responsible for delivering the complete solution within the quoted price. All offerors must be registered in the System for Award Management (SAM) database in compliance with FAR 52.204-7, and no socioeconomic set-asides apply to this solicitation. Proposals must be submitted electronically via email to KTMContracts@state.gov by the deadline of August 7, 2026, in MS-Word, MS-Excel, or Adobe Acrobat PDF format, with individual files not exceeding 20MB; larger submissions must be split into multiple emails under the size limit. The contracting officer for execution is located in Kathmandu, with primary and secondary points of contact available for operational coordination, while administrative inquiries are handled from Washington, D.C. The scope requires the contractor to provide all personnel, tools, equipment, transportation, and materials necessary for full installation and commissioning, though detailed performance specifications, delivery schedules, pricing structures, and inspection criteria are not yet included as the solicitation is still in pre-release status and has not yet been formally issued.
US Embassy Kathmandu

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 238210
New
Federal
Repair Emergency Power, B720
Solicitation # W50S9726BA001
The Tennessee National Guard is seeking qualified small businesses to bid on a firm-fixed-price contract to repair and upgrade the emergency power system at Building 720 on Berry Field Air National Guard Base in Nashville, Tennessee. The scope of work includes retrofitting existing generators with paralleling equipment, installing a new generator docking station, extending new and existing generator feeds, and connecting all new electrical feeds to the automatic transfer switch panels. The contractor must ensure uninterrupted power to the facility during all phases of work by providing temporary electrical service to maintain 100% operational continuity for the 118th Wing’s missions. All work must comply with the statement of work, construction plans, specifications, and applicable building codes. The contract has a fixed duration of 120 calendar days after notice to proceed and is set aside entirely for small businesses under NAICS code 238210, with a size standard of $19 million. The estimated contract value ranges between $250,000 and $500,000. The solicitation, numbered W50S9726BA001, is scheduled to be released on or about July 24, 2026, with bids due on or about August 27, 2026. A mandatory pre-bid conference is planned for August 13, 2026, followed by a site visit; all questions must be submitted by August 7, 2026, to the designated email addresses. Interested contractors must be registered in SAM.gov at no cost and must access all solicitation materials exclusively through the Contract Opportunities page on SAM.gov. The contract includes a strict limitation on subcontracting, prohibiting the prime contractor from paying more than 85 percent of the total contract value, excluding materials, to non-similarly situated subcontractors. Any work performed by similarly situated subcontractors counts toward this 85 percent cap. The government will not issue paper copies of the solicitation or amendments, and bidders are solely responsible for monitoring the website for updates. No agency-specific policies govern equitable adjustments for change orders, and the government disclaims liability for information obtained from unofficial sources.
W7N1 Uspfo Activity Tnang 118

POSTED

about 6 hours ago

DEADLINE

in 21 days
View Details

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 334516
New
Federal
Combined Sources Sought Notice and Notice of Intent to Award a Sole Source Contract for Mid-Wave Infrared Distributed Feedback Laser Systems
Solicitation # NIST-SS26-CHIPS-172
The National Institute of Standards and Technology (NIST) is conducting market research to evaluate potential sources for Mid-Wave Infrared Distributed Feedback (DFB) laser systems critical to its Chemical Sciences Division’s precision spectroscopic and chemical measurement research. The requirement specifies two integrated laser systems: one operating at 2700 nm ± 10 nm and another at 3000 nm ± 10 nm, each requiring a DFB laser diode, thermoelectric cooler, NTC thermistor, anti-reflection coated window, lens cap compatibility, heatsink, and appropriate electronic and optical connectors. NIST has identified Nanoplus America, Inc. as a potential supplier but explicitly states that this does not commit to a sole-source award; the government is actively seeking alternative sources capable of meeting the technical specifications to allow for competitive procurement if viable options exist. Responses must be submitted by August 10, 2026, and should include company details, compliance with SAM.gov registration, size status under NAICS code 334516, product specifications, origin, and pricing, as well as assessments on whether offerings qualify as commercial products or COTS items and commercial services under FAR definitions. Respondents are expected to provide comprehensive information on their ability to meet or exceed the stated requirements, including standard commercial pricing, terms and conditions, warranty details, and supply chain compliance with federal acquisition regulations such as FAR Clause 52.219-14 on subcontracting limitations. NIST is particularly interested in feedback that improves clarity, promotes competition, and supports domestic manufacturing under “Made in America” principles. While this notice seeks voluntary input to inform future acquisition decisions, no obligation is created for NIST to award a contract or compensate respondents. Responses must be submitted via email in specified formats without proprietary or classified content, and failure to provide complete, detailed information may result in exclusion from consideration. NIST intends to use all received data to refine requirements and determine whether a competitive solicitation will be issued on SAM.gov or eBuy, with any subsequent procurement requiring a separate, formal response.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334515
New
Federal
Combined Sources Sought Notice and Notice of Intent to Award a Sole Source Contract for ScanWave Pro electronic controller for a Vero AFM
Solicitation # NB643090-26-01166
NIST is seeking market input to identify alternative commercial suppliers capable of providing a single integrated scanning Microwave Impedance Microscopy (sMIM) electronic controller to replace its existing modular microwave assembly on a Government-owned Vero Atomic Force Microscope. The controller must be fully compatible with the existing ScanWave 2.0 Probe Interface module without requiring hardware modifications and must deliver at least a tenfold improvement in measurement sensitivity while enabling seamless integration with the AFM’s multimodal capabilities, including electrical, mechanical, thermal, and piezoelectric characterization. The system must support direct nanoscale impedance measurements and preserve all current workflows tied to the Vero AFM’s customized holder and instrumentation. NIST is not committed to a sole source procurement with Primenano, Inc., and is actively exploring competition if capable alternatives exist; the acquisition strategy remains undetermined pending market feedback. Respondents are requested to provide detailed information including company profiles, product specifications, manufacturing origins, commercial pricing, warranty terms, and compliance with federal regulations such as the FAR clause on subcontracting limitations. Responses must indicate whether the product qualifies as a commercial item or COTS and include standard commercial terms and conditions. NIST is particularly interested in input on whether the requirements could be refined to encourage domestic manufacturing and broader competition. All submissions must be received by August 12, 2026, and should not include proprietary or classified information. This notice is purely for market research and does not obligate NIST to award a contract or compensate respondents. Information gathered will inform the development of a potential future solicitation that may be posted on SAM.gov or eBuy, and responses to this notice do not substitute for formal bid submissions.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
Federal
5G Cellular Base Station (BRAND NAME Ericsson)
Solicitation # NB675030-26-01810
The National Institute of Standards and Technology (NIST) is conducting market research to identify vendors capable of supplying a single 5G Cellular Base Station under the brand name Ericsson, along with full warranty and support services, as outlined in the attached specifications. This sources sought announcement is strictly for information gathering and does not constitute a solicitation, request for quotation, or commitment to award a contract. NIST is evaluating potential suppliers of all sizes, including small businesses, small disadvantaged businesses, woman-owned small businesses, HUBZone businesses, service-disabled veteran-owned small businesses, and veteran-owned small businesses, with no obligation to compensate respondents for their submissions. The acquisition is classified under NAICS code 334220 with a small business size standard of 1,250 employees, and if at least two qualified small businesses respond, the procurement may be set aside exclusively for small businesses. Interested parties must submit a capability statement, not exceeding five pages, containing key details such as company profile including employee count, office locations, Unique Entity Identifier, and CAGE code; the name of the entity providing the product versus the manufacturer with its country of origin; specification sheets and product examples that meet NIST’s requirements; typical lead time for delivery, installation, and training; and verification of small business status. Additional relevant information may be included to assist in shaping the final acquisition strategy. Responses are due by July 23, 2026, and should be sent to the point of contact listed, Clifford Nicholson. NIST will use the information gathered to determine whether to proceed with a competitive procurement on SAM.gov and to evaluate potential set-aside opportunities under small business programs. Sales brochures and marketing materials will not be accepted or considered.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
Federal
145 GHz Photodiode
Solicitation # NB672030-26-02283
The National Institute of Standards and Technology (NIST) is conducting market research to identify capable vendors for the procurement of a single 145 GHz photodiode, as outlined in attached technical specifications. This sources sought notice is not a solicitation or request for quotation and does not obligate the government to award a contract; it is solely intended to gather information on potential suppliers, assess market capability, and determine if a small business set-aside is feasible. NIST is seeking responses from all responsible sources, including small businesses, small disadvantaged businesses, women-owned small businesses, HUBZone firms, service-disabled veteran-owned small businesses, and veteran-owned small businesses, as well as large businesses. The requirement falls under NAICS code 334413, with a small business size standard of 1,250 employees. Responses must be submitted electronically and are limited to five pages, including company profile details, entity identifiers, manufacturing origin information, product specification compliance, typical delivery and installation timelines, verification of small business status, and any additional relevant information. NIST will use the submissions to evaluate whether at least two qualified small businesses can meet the technical requirements, which could lead to a competitive small business set-aside procurement on SAM.gov. The agency will not compensate respondents for their submission, and marketing materials or sales brochures will not be considered. The response deadline is July 16, 2026, and submissions must include the company name providing the product, the entity responsible for manufacturing, the country of origin, and documented evidence that the product meets the specified 145 GHz photodiode requirements. All responses should be directed to Clifford Nicholson at NIST via the provided contact details, and information gathered will assist in finalizing the acquisition strategy, including potential solicitation issuance and contract award methodology.
Semiconductor and Related Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
Federal
Assembled Circuit Boards
Solicitation # 1333ND26QNB030365
The National Institute of Standards and Technology (NIST) is seeking proposals for the procurement of Assembled Circuit Boards at its Gaithersburg, Maryland campus, under solicitation number 1333ND26QNB030365. This requirement is classified under NAICS code 334412 and is open to all eligible vendors without any specific set-aside designation. The solicitation was posted on August 5, 2026, with responses due by August 19, 2026, at 2:00 PM Eastern Time. All technical specifications, design files, and contractual clauses are detailed in the attached Statement of Work, Sample Design Files, and Applicable Provisions and Clauses, which must be reviewed in full by interested parties to ensure compliance with NIST’s requirements. Performance of the contract will be conducted at the Gaithersburg, MD facility with a zip code of 20899. Primary point of contact for this opportunity is Nina Lin, reachable at nina.lin@nist.gov, with Donald Collie as the secondary contact at donald.collie@nist.gov. The procurement is categorized as a combined solicitation, indicating it may include elements of both purchase and service contracts. Interested vendors can access the full solicitation and related documentation through the SAM.gov portal via the provided UI link. All submissions must adhere strictly to the instructions and technical criteria outlined in the supporting documents to be considered for award.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 236220
New
Federal
Building 215 Clean Room HEPA Filter Replacement
Solicitation # 1333ND26RNB190014
The National Institute of Standards and Technology (NIST) in Gaithersburg, Maryland, is soliciting bids from qualified small businesses for the replacement of HEPA filters in Building 215’s cleanroom, under solicitation number 1333ND26RNB190014, which is a total small business set-aside pursuant to FAR 19.5 and NAICS code 236220. The scope of work involves comprehensive cleanroom rebalancing, including the replacement of all terminal supply HEPA filters, repair or modification of exhaust and supply ductwork, installation of new exhaust air valves, rebalancing of air handling units and exhaust fans, and full recertification of the cleanroom environment to ensure proper pressurization and airflow compliance. The project requires adherence to strict technical standards such as ANSI A13.1 for labeling, FS L-P-387 for signage materials, and a two-year field-use history for all materials and equipment. Key deliverables include final air balance reports, pressure test reports with 11x17 fold-out drawings, redline drawings, calibration certificates, and a deficiency remediation report. All submittals must be properly labeled with project details, firm information, revision numbers, and specification references, and must be transmitted via an approved transmittal form. The Contractor is responsible for maintaining a daily and weekly reporting regimen, including construction logs, material delivery records, and field condition updates, and must use CPM scheduling with monthly updates, where all float belongs to the Contracting Officer. Equipment delivery schedules must be submitted within ten days of award and updated monthly or as directed by the Contracting Officer’s Representative (COR). Pre-award activities include a mandatory site visit scheduled for June 15, 2026, with registration required, and an additional site visit added via Amendment 0003 on July 27, 2026. Amendments have extended the quotation submission deadline to August 7, 2026, and the RFI submission deadline to July 29, 2026, while revising Sections L and M of the solicitation to align evaluation and instruction criteria. The COR and COTR will oversee submittal approvals, equipment schedules, comparable product requests, and final inspections, which include rechecking up to 25% of certified data points and requiring full acceptance by the A/E for all TAB reports. Contractors must comply with
Commercial and Institutional Building Construction

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Brand Name Only: FLIR Thermal Camera Bundle
Solicitation # 1333ND26QNB730401
This solicitation, identified as 1333ND26QNB730401, is a Firm Fixed Price Request for Quotation issued under the Revolutionary FAR Overhaul Part 12 for the acquisition of commercial products, specifically FLIR thermal imaging camera bundles, for use by the National Institute of Standards and Technology’s Fire Research Division in Gaithersburg, Maryland. The requirement is non-competitive and based solely on brand-name FLIR equipment due to critical interoperability needs with existing infrastructure, including proprietary software, data workflows, and calibration protocols; switching to a different manufacturer would incur prohibitive costs and delays in research continuity. Only small businesses under the NAICS code 334516, with a size standard of 1,000 employees, are eligible to respond, as this is a total small business set-aside. The deliverables include new, unaltered FLIR T865, T560, and E96 cameras with specified lenses, each meeting exact technical parameters such as 640x480 thermal resolution, 30 Hz frame rate, 7.5–14.0 micron spectral range, ≤50 mK thermal sensitivity, and 12-micron pixel pitch, all delivered in original manufacturer packaging with full documentation and software. Delivery must occur within 30 days after receipt of order, with F.O.B. Destination terms placing all shipping responsibility and risk on the contractor to the designated receiving location at NIST’s Building 301 in Gaithersburg, Maryland. Offers must be submitted in two volumes—Technical and Price—no more than five single-spaced pages for the technical portion, using 12-point font in readable formats such as PDF or Word, and emailed to designated NIST points of contact by the revised deadline of August 12, 2026 at 12:00 PM ET. The Government will evaluate quotations using a Lowest Price Technically Acceptable method, accepting only those that fully satisfy all technical requirements and offer the lowest price. Award will be made to a responsible small business supplier with an active SAM.gov registration, and all required FAR and CAR clauses are incorporated, including those on equal opportunity, trafficking in persons, Buy American, electronic funds transfer, and organizational conflict of interest. Special requirements include NIST-specific clauses on campus access during operational changes, mandatory electronic invoicing via INVOICE@NIST.GOV, and potential transition to the
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details