Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

NIST-Traceable Calibration and Certification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of factory-authorized calibration services for VHP 1000-ARD systems, ensuring all equipment meets precise technical standards and regulatory requirements. Calibration must be conducted in full compliance with federal biological safety regulations, and each completed service must be accompanied by NIST-traceable certification documentation to verify accuracy and reliability. The work is specifically tied to operations at Dugway, Utah, with the place of performance located at the 84022 ZIP code, indicating direct support for Department of Defense facilities in that region. The contract is classified as a subcontract under NAICS code 811210, which corresponds to optical and measuring instrument repair and maintenance services, and is managed by the W6QM Micc-dugway Prov Grd organization under the broader oversight of the Department of Defense. All deliverables must satisfy stringent federal compliance standards to ensure the integrity of biological safety operations relying on these calibrated systems.

General Info

Factory calibration and NIST certification of VHP 1000-ARD systems under DoD oversight in Utah.

Agency

Department Of Defense → W6QM Micc-dugway Prov GrdView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Dugway, UT, 84022, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-dugway Prov Grd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QM Micc-dugway Prov Grd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform factory-authorized calibration of VHP 1000-ARD systems and issue NIST-traceable certification documentation in compliance with federal biological safety regulations.

Similar Contracts

Same NAICS industry code

Maintenance and repair, replacement parts, and software upgrades/updates for the Omnicell Supply Systems located at the Womack Army Medical Center (WAMC), Fort Bragg, North Carolina

Solicitation # HT941026QE0XX

The Defense Health Agency Healthcare Contracting Division – West plans to award a sole source contract to OMNICELL, Inc. for the maintenance, repair, replacement parts, and software upgrades of Omnicell Supply Systems at Womack Army Medical Center in Fort Bragg, North Carolina. The base period of performance runs from September 1, 2026, through August 31, 2027, with an optional six-month extension from September 1, 2027, to February 28, 2028, under FAR 52.217-8. The contractor must ensure all government-owned Omnicell equipment remains fully operational by adhering strictly to original equipment manufacturer specifications, covering all labor, parts, materials, and travel expenses required to perform these services. This is a presolicitation notice, not a formal request for quotes, but responsible sources may submit capability statements or quotations for consideration. The North American Industry Classification System code is 811210, with a small business size standard of $34 million in annual revenue. The contracting office is located in Camp Pendleton, California, and all responses must be submitted by August 14, 2026. The primary point of contact is Keary Haubner, reachable via email at keary.t.haubner.civ@health.mil.

Defense Health Agency Hcd West

POSTED

DEADLINE

Preventative Maintenance and Emergency Repair Services for Eight (8) Vidir Motorized Storage Bed Lifts Base plus Four Option Years - POP 09/01/2026 to 08/31/2031

Solicitation # 36C26226Q1170

The Department of Veterans Affairs is seeking service-disabled veteran-owned small businesses to provide preventative maintenance and emergency repair services for eight Vidir Motorized Storage Bed Lifts at the VA Loma Linda Healthcare System’s off-site warehouse in Redlands, California. The contract covers a base year from September 1, 2026, through August 31, 2027, with four additional option years extending through August 31, 2031. Each year requires two preventative maintenance cycles per unit, including mechanical and electrical inspections, cleaning, lubrication, calibration, sensor verification, replacement of OEM-approved parts, and comprehensive documentation. Emergency repair services must include same-day or next-business-day response, fault diagnosis using OEM methods, component replacement, and submission of detailed service reports within two business days. All work must comply with OEM specifications, VA and VHA policies, Joint Commission standards, OSHA regulations, and NFPA 101 Life Safety Code, with only new OEM Vidir parts permitted. Contractors must have qualified technicians who wear VA-issued badges, coordinate scheduling with the Contracting Officer’s Representative, and adhere to strict safety, security, and conduct protocols, including no access to VA IT systems and prohibited use of weapons, drugs, or alcohol. This is a firm-fixed-price, 100 percent Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS code 811210 with a $34 million small business size standard. All offerors must be verified in the VetCert system and registered in SAM at the time of submission. Quotes must include technical capability statements demonstrating direct experience with Vidir lifts, confirmation of OEM parts usage, a detailed emergency response plan, full pricing for base and option years, and proof of SDVOSB status. Evaluation will prioritize Technical Capability and Past Performance equally and collectively over Price, with no discussions expected—vendors must submit their best offer upfront. Performance standards require 100 percent completion of PM cycles, 98 percent equipment uptime, 95 percent on-time emergency response, and no more than one repeat failure per quarter per unit. Invoices must be submitted electronically via Tungsten Network using contract and obligation numbers, and no advance payments or overtime reimbursements are authorized. Responses are due by 4:00 p.m. Pacific Time on August 13, 2026, to Contract Specialist Maria C. Asher, with any exceptions to solicitation terms required

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

AWARD NOTICE: 415 SCMS STRATEGIC MAC IDIQ

Solicitation # FA825026R0001

The 415 SCMS Strategic MAC IDIQ is a multiple-award, indefinite-delivery/indefinite-quantity contract with a maximum ceiling value of $300,000,000, awarded by the Air Force Materiel Command Office H/PZAAA located at Hill Air Force Base, Utah. The contract provides a framework for acquiring Test, Teardown and Evaluation, Minor and Major Repair, Total Rebuild, and other ancillary services in direct support of equipment maintenance and restoration, with all work performed under Firm-Fixed Price arrangements. The scope of work is determined at the task order level, including specification of National Stock Numbers, quantities, level of repair effort, and delivery terms such as F.O.B. Origin or Destination. The contract is structured to allow for a diverse pool of qualified contractors, with 18 awardees selected to compete for future task orders, each awarded under a unique contract number. Onboarding opportunities are available semi-annually during the first year and annually thereafter, enabling new contractors to join the pool after meeting Repair Qualification Requirements and submitting a Capability Package as a first task order, while current contractors may qualify for additional NSNs without recompeting unless seeking expansion. All contractors must comply with stringent cybersecurity requirements, including CMMC Level 2 self-assessment verified through the Supplier Performance Risk System, NIST SP 800-171, and the Federal Acquisition Supply Chain Security Act, alongside mandatory adherence to DFARS and FAR clauses governing contract administration and data security. Performance must meet technical standards outlined in MIL-HDBK-1568E, T.O. 1-1-691, MIL-STD-130, and MIL-STD-129 for corrosion control, item unique identification, and packaging, with IUID data submission to the IUID Registry required prior to government acceptance. The contract’s ordering period runs from June 1, 2026, through May 31, 2031, with an optional extension to May 31, 2036, and all deliveries and inspections are governed by FAR inspection clauses, with final acceptance authority resting solely with the Government. Payment is processed through DFAS using WAWF, and performance data including engineering change proposals and counterfeit prevention plans are required to be submitted per Contract Data Requirements Lists referenced in the attachments. Technical qualification is the sole pass/fail evaluation criterion for award, with responsibility and past performance reviewed for eligibility, creating

FA8250 Afsc Pzaaa

POSTED

DEADLINE

J065--PMR Siemens IMAGING EQUIPMENT

Solicitation # 36C26226Q1279

The contract titled J065--PMR Siemens IMAGING EQUIPMENT is a solicitation issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22 located in Gilbert, Arizona, with a solicitation number of 36C26226Q1279. It is classified under NAICS code 811210, indicating it pertains to medical and diagnostic equipment repair and maintenance services. The solicitation was posted on July 30, 2026, and responses are due by August 14, 2026, at 7:00 PM Eastern Time. The place of performance is unspecified, suggesting the work may occur at various VA medical facilities nationwide. The primary point of contact for inquiries is Garrett Lyles, Contract Specialist Trainee, reachable via email at garrett.lyles@va.gov. This solicitation seeks proposals for the procurement, installation, maintenance, or repair of Siemens imaging equipment, likely for use across VA healthcare systems to support diagnostic capabilities for veterans.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Intent to Sole Source: Guldmann Ceiling Lifts PM Services

Solicitation # 36C24726Q0793

The Department of Veterans Affairs, Network Contracting Office 07, intends to award a sole source, firm fixed price contract to Guldmann, Inc. for Preventive Maintenance Services on Guldmann Ceiling Lifts, with an anticipated award date of August 5, 2026. This action is justified under 41 U.S.C. 3304(a)(1) and RFO 12.102(a), citing the restricted competition authority due to the proprietary nature of the equipment and the requirement for manufacturer-specific expertise. The contract includes one base year and four option years, with services to be performed at two locations within Georgia: the Atlanta VA Medical Center and the Marietta VA facility. The NAICS code 811210 applies, and the procurement falls under PSC J065 for medical equipment maintenance. All interested parties have until August 4, 2026, to submit written responses demonstrating their capability to perform the work, though only those registered in SAM and possessing an authorized distributor letter from Guldmann will be eligible for award. Service-Disabled Veteran Owned and Veteran Owned Small Businesses must also submit a self-certification meeting the Non-Manufacturer Rule requirements under 13 CFR 121.406. The Government will evaluate all submissions to determine whether competitive procedures are warranted, and no costs incurred by respondents will be reimbursed. Responses must be emailed to Ashley Stewart at Ashley.Stewart4@va.gov by the deadline.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

J062--Replace Exterior LED Bulbs at the Jesse Brown VA Medical Center in Chicago, IL

Solicitation # 36C25226Q0466

This solicitation, numbered 36C25226Q0466, pertains to the replacement of exterior LED bulbs at the Jesse Brown VA Medical Center in Chicago, IL, and has been amended to provide critical visual reference materials to assist potential offerors in accurately assessing the scope of work. The amendment adds three attachments: a site plan, a building elevation layout, and images of related signage, which are intended to clarify existing conditions including the number of lights requiring replacement, their accessibility, and the specific types or part numbers of bulbs needed. These visuals serve as supplemental reference documents to support the development of informed technical and price proposals, as the Government previously lacked the detailed specifications necessary to answer vendor inquiries. The Performance Work Statement has been revised with changes highlighted in yellow, and Section 3 has been fully replaced to reflect updated performance requirements, which are now included as Attachment 4. The response deadline for proposals has been extended to August 3, 2026, at 4:00 PM Local Time, while all other solicitation terms and conditions remain unchanged. The contract is administered by the 252-NETWORK Contract Office 12 under the Department of Veterans Affairs, with the primary point of contact being Michele D Coleman. The NAICS code 811210 indicates the classification for the work under building maintenance services. Despite the absence of explicit details on evaluation factors, contract value, deliverables, inspection criteria, or special requirements in the provided metadata and FAR sections, the inclusion of the visual attachments and revised PWS signals a deliberate effort to enhance transparency and support precise bidding.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

CRxFlex II systems Preventative Maintenance and Repair

Solicitation # FA480926Q0068

Seymour Johnson AFB is seeking quotes for a five-year Firm Fixed Price contract to perform preventative maintenance on two CRxFlex II X-ray systems manufactured by GEIT, with the work to be conducted at Goldsboro, North Carolina. The contractor must supply all labor, tools, equipment, and supplies necessary to maintain these systems, including the provision of a replacement roller spare parts kit, and is required to deliver a detailed summary report following each maintenance event with recommended actions as needed. Only vendors certified by Baker Hughes are eligible to perform this work, ensuring adherence to specialized technical standards. This solicitation is a Small Business Set Aside under NAICS code 811210, and all offers must be submitted by August 13, 2026. Although funds are not currently available and no award will be made until appropriation occurs, the government retains the right to cancel the solicitation at any time without reimbursement of offeror costs. Inquiries should be directed to Alison Gandulla or Jason Endicott via email.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

Repair of the Antenna coupler on the Logic Control Unit

Solicitation # 7_30_2026

The U.S. Air Force is seeking potential sources capable of repairing the Antenna Coupler, NSN 5985-01-463-8400SO, Part Number 7-7PIN438, used on AC/HC/MC and WC-130J aircraft. This repair is classified as RMC 3/R, meaning it must be performed directly by the original manufacturer or a source with equivalent technical access, as the government lacks ownership of the proprietary data required for repair and has determined that acquiring the data or reverse engineering the component is uneconomical. The original equipment manufacturer is Chelton Ltd T/A Cobham in the UK, and the government seeks to identify additional qualified repairers that can meet the stringent performance and safety requirements necessary to ensure mission-critical functionality for Special Operations Forces. Any contractor selected must furnish all materials, tools, test equipment, and services, ensuring replacements meet or exceed original quality standards, and must maintain calibrated support equipment either onsite or through authorized subcontractors. Responses to this Request for Information are purely for market research purposes and do not constitute proposals or guarantee future contract opportunities; no reimbursement for participation costs will be provided. Interested parties—large and small businesses, including joint ventures and teaming arrangements—are required to submit detailed documentation of their technical capabilities, experience with similar military aircraft components, quality management systems such as AS9100 or ISO 9001, repair processes, configuration management, and test procedures. Specific attention is required to address the absence of design data and the unique challenges of repairing a part with no alternative sources. Respondents must also disclose business status, ownership, and facilities, and demonstrate ability to handle classified materials, manage obsolescence, and provide accepted test protocols for government review. All submissions are due no later than August 29, 2026, and must be emailed directly to the designated contracting specialist and contracting officer.

FA8524 Afsc Pzaaa

POSTED

DEADLINE

LRAFB_SERVER CHILLER MAINTENANCE AND REPAIR

Solicitation # FY26_SERVERCHILLERMXANDREPAIR

The Little Rock Air Force Base is soliciting bids for the maintenance and repair of server chillers under a Small Business Set Aside contract, designated as FY26_SERVERCHILLERMXANDREPAIR. The contractor must provide all necessary resources including personnel, equipment, tools, materials, supervision, and nonpersonal services to ensure the proper functioning and upkeep of the chillers, with full compliance required to all attached documentation. Work is to be performed on-site at Little Rock Air Force Base in Arkansas, with all tasks tailored to support critical military operations that rely on climate-controlled server environments. The solicitation was posted on July 30, 2026, with proposals due by August 21, 2026, at 9:30 PM Eastern Time. The contract falls under NAICS Code 811210, which corresponds to commercial and industrial machinery and equipment repair and maintenance. The contracting office is the FA4460 19 Cons Pka within the Department of Defense, and primary contact for inquiries is Amaya Jordan, with Jonathan Reed serving as the secondary point of contact. This opportunity is exclusively open to small businesses as defined by the SBA, and responses must be submitted through the official SAM.gov portal linked in the solicitation.

FA4460 19 Cons Pka

POSTED

DEADLINE

RFQ FTB-2627-00178 On-Site Out-of-Warranty Equipment Maintenance - IT Hardware (Break & Fix) - Various Locations

Solicitation # 0000039913

The State of California, through the Franchise Tax Board, is soliciting proposals for on-site maintenance services for out-of-warranty IT hardware, including notebooks, desktops, printers, and plotters, across multiple locations in Northern and Southern California as well as field offices in Chicago, Houston, and New York. This contract requires vendors to provide break-and-fix support for equipment that is no longer covered by manufacturer warranties, ensuring minimal downtime and consistent operational performance. Services must be delivered promptly at various FTB sites, requiring the contractor to maintain a responsive and flexible presence across a geographically dispersed service area. The solicitation closes on September 18, 2026, at 5:00 PM, and interested parties must ensure compliance with all State of California procurement requirements, including potential registration on official state portals. All inquiries should be directed to Trang Thi at the provided contact details, and bidders are advised to verify the official solicitation through the state’s procurement system, as third-party sources may not reflect the most current or accurate information.

State of California

POSTED

DEADLINE

in about 2 months

PR24325_F2934-262080_TBD (MatLab) for DFO

Solicitation # WS5749279256

The Government of Canada, through Public Services and Procurement Canada on behalf of the Department of Fisheries and Oceans, is seeking quotations for MATLAB maintenance and support services under solicitation number WS5749279256, referenced as PR24325_F2934-262080_TBD. All quotes must be submitted in Canadian dollars through the SAP Ariba platform by August 7, 2026, at 2:00 PM EST, with late submissions considered non-compliant. The contract is open to all eligible suppliers without set-aside restrictions, and the place of performance is Canada. Questions regarding the RFQ should be directed to Afrim Bega, Contracting Authority, at afrim.bega@tpsgc-pwgsc.gc.ca. The solicitation was posted on July 30, 2026, and detailed information can be accessed via the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

UPS APC BATTERY REPLACEMENT

Solicitation # W6369-27-X001/A

The Department of National Defence, acting on behalf of Defence Research and Development Canada, is seeking a contractor to perform a comprehensive battery replacement service for an APC Uninterruptible Power Supply system located at the DRDC Ottawa Research Centre. The scope of work includes supply, delivery, installation, configuration, and testing of eight SYBT4 battery modules specifically designed for the APC UPS model STCF40KF with serial number PD0810360116, alongside the safe removal and environmentally compliant disposal of the existing batteries. Strict compatibility requirements mandate that only the specified battery modules are acceptable; no substitute or equivalent products will be considered under any circumstances. The contract solicitation, identified as W6369-27-X001/A, was posted on July 30, 2026, with a deadline for responses set for August 6, 2026. Performance of all services is required at the National Capital Region in Canada, and the contracting authority is Tatyana Vasilchuk, who can be reached via email for inquiries. The work must ensure seamless integration and full operational verification of the UPS system post-installation to maintain uninterrupted power support for critical IT infrastructure, emphasizing precision, compliance, and adherence to environmental regulations throughout the entire process.

Department of National Defence

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-dugway Prov Grd

Same awarding agency

Specialized Packaging and Handling for Sensitive ComponentsThe contract requires specialized packaging and handling for high-value radar components to ensure secure, ESD-safe transport from the original equipment manufacturer to Dugway Proving Ground, Utah, with a ZIP code of 84022. The services must account for the sensitivity of the components by implementing protocols that prevent electrostatic discharge and, where necessary, maintain controlled environmental conditions during transit to preserve functionality and integrity. The work falls under NAICS code 484220, indicating it is classified as a specialized freight arrangement requiring precise logistical expertise. This is a subcontract under the Department of Defense, specifically managed by the W6QM Micc-Dugway Prov Grd office, and is intended to support critical defense operations at a secure federal testing facility. The transport must comply with stringent security and handling standards, reflecting the high-value and sensitive nature of the radar parts. The contract was posted on July 7, 2026, and performance is exclusively located at the Dugway site, with no other locations permitted. All activities must align with DoD requirements for safeguarding sensitive technology during movement across the supply chain.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Precision Alignment and Calibration ServicesThe contract involves post-installation services for radar systems including precision alignment, signal calibration, and comprehensive system validation to guarantee operational accuracy and mission readiness. These technical activities are critical for ensuring that installed radar equipment performs reliably under real-world conditions, meeting stringent defense standards. The work is performed at Dugway, Utah, with a ZIP code of 84022, and falls under the NAICS code 541330, indicating it is a specialized scientific and technical consulting service subcontract. The subcontract is managed by the Department of Defense through the W6QM Micc-Dugway Prov Grd organization, with the opportunity posted on July 7, 2026, and is accessible via the SAM.gov platform for relevant contractors seeking involvement in defense-critical instrumentation validation.

Engineering Services

POSTED

DEADLINE

Rotary Joint (Elevation Axis) SupplyA high-precision electromechanical rotary joint is being procured under a subcontract to enable uninterrupted RF signal transmission during radar elevation movements, with strict requirements for exact OEM compatibility to ensure seamless integration with existing defense systems. The component must maintain signal integrity under dynamic operational conditions and is critical for the performance of radar systems deployed at the Dugway Proving Ground in Utah, where the contract’s place of performance is specified. The procurement falls under NAICS code 335313, indicating classification within the manufacturing of electric lighting and wiring equipment, and is administered by the Department of Defense through the W6QM Micc-Dugway Prov Grd office. The solicitation was posted on July 7, 2026, and while no set-aside preferences or point of contact details are provided, the focus remains on delivering a mission-critical component with no tolerance for deviation from specified technical standards.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Radar System Dehydrator Unit SupplyThe contract involves the supply of a ruggedized dehydrator unit specifically designed to maintain dry internal conditions within radar systems, ensuring the protection of sensitive electronic components from moisture-related damage. This equipment is critical for sustaining operational reliability in high-humidity or harsh environmental conditions typically encountered in military and defense applications. The unit must meet stringent durability and performance standards to function effectively in field-deployed radar systems without requiring frequent maintenance or intervention. The contract is categorized as a subcontract under NAICS code 333415, indicating it falls within the manufacturing of industrial and commercial machinery and equipment. It is administered by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, with performance required at Dugway, Utah, 84022. The solicitation was posted on July 7, 2026, and there is no indication of a set-aside designation, meaning the opportunity is open to all eligible bidders. The focus is on delivering a highly reliable component that integrates seamlessly into existing radar infrastructure to safeguard system integrity and extend service life under demanding operational conditions.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Pulse Profile RF Sensor SupplyThe contract pertains to the procurement of a proprietary RF sensor designed specifically for integration with a C-Band Doppler Radar system, requiring full compatibility with the EEC’s existing architecture and mandatory factory certification to ensure operational integrity and performance standards. The sensor must meet precise technical specifications to function seamlessly within the radar environment, ensuring accurate data collection and system reliability under operational conditions. This subcontract, issued under the NAICS code 334516 by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, is performance-based at Dugway, Utah, with a ZIP code of 84022. The solicitation was posted on July 7, 2026, and emphasizes strict adherence to certification requirements and system compatibility without room for deviation. The supplier must deliver a fully validated unit that meets all embedded technical and regulatory expectations, ensuring seamless interoperability and long-term sustainment within the defense radar network.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Technical Documentation and Program SupportThis subcontract, titled "Technical Documentation and Program Support," is designated as a Total Small Business Set-Aside under the SBA regulations and falls under NAICS code 541690. The contract involves maintaining and updating various technical documents including service logs, calibration records, and compliance reports. Additionally, it requires support for PRS and Technical Exhibit B deliverables, as well as tracking training certification. The work is to be performed primarily in Tooele, with the Department of Defense's office W6QM Micc-Dugway Prov Grd as the contracting agency. The contract emphasizes thorough documentation management and program support activities to ensure ongoing compliance and certification requirements are met effectively.

Other Scientific and Technical Consulting Services

POSTED

about 2 months ago

DEADLINE

Supply of Replacement Parts, Filters, Oils, and SealsThis contract involves the supply of OEM or qualified equivalent replacement parts, consumables, and fluids specifically for the Multi-Shaker Vibration Chamber System, ensuring compliance with all relevant specifications and Buy American requirements. It is a subcontract classified under a Total Small Business Set-Aside in accordance with FAR 19.5, targeting small business participation. The solicitation relates to NAICS code 423830, which pertains to automotive parts, accessories, and tire stores. The contract is issued by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, with the place of performance designated as Tooele, Utah, zip code 84074. The procurement focuses on items such as replacement parts, filters, oils, and seals, essential for maintaining the operational readiness and performance of the Multi-Shaker Vibration Chamber System. This opportunity underscores the importance of adhering to specific sourcing guidelines, emphasizing American-made products while supporting small business contractors.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 months ago

DEADLINE

Preventive Maintenance and Calibration Services for Vibration Chamber SystemThis contract involves providing scheduled preventive maintenance, calibration, and non-personal support services for the Multi-Shaker Vibration Chamber System located at Dugway Proving Ground in Tooele, Utah. The scope includes performing system diagnostics and replacing consumable parts to ensure optimal operation and reliability of the equipment. The contract is designated as a subcontract and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program. Administered by the Department of Defense through the W6QM Micc-Dugway Proving Ground office, the contract falls under the NAICS code 811310, which pertains to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. This work will be performed on-site at Dugway Proving Ground, with an emphasis on maintaining the vibration chamber system’s functionality to support ongoing testing and evaluation activities. The contract’s specific solicitation number is not provided, but all necessary details are accessible via the SAM.gov portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Shipping and Handling for Weight SetsThis contract involves providing secure packaging, transportation, and handling services specifically for weight sets moving between Dugway Proving Ground and various calibration facilities. It is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, targeting small businesses for participation. The service falls under the NAICS code 484220, which pertains to specialized freight trucking, supporting logistics and transport operations. The Department of Defense, through the W6QM Micc-Dugway Proving Ground office, is the contracting agency responsible for this requirement. The location of performance is specified as Tooele, with the ZIP code 84074, indicating the geographic focus of the contract's execution. The main objective is to ensure the safe and reliable handling of weight sets, emphasizing secure packaging and proper transportation to maintain calibration standards and operational readiness.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 2 months ago

DEADLINE

Weight Set Calibration ServicesThis contract involves the provision of ISO 17025 accredited calibration services for weight sets, ensuring that all calibration processes comply with internationally recognized standards. The scope includes not only the precise calibration of the weight sets but also the required documentation and proper labeling of each item to maintain traceability and quality assurance. The services will be performed as a subcontract under a Total Small Business Set-Aside, emphasizing the involvement of small business enterprises. The contract is associated with the Department of Defense, specifically the W6QM Micc-Dugway Prov Grd office, with the place of performance located in Tooele, Utah, zip code 84074. The solicitation does not specify a solicitation number or point of contact, but the related NAICS code is 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance. This contract supports maintaining calibrated weight sets critical to the agency's operations through a rigorous and certified calibration process.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Temperature Probe CalibrationThis contract involves the performance of ISO 17025 accredited calibration services specifically for temperature probes. The scope includes not only the calibration itself but also the necessary documentation and labeling that meet the accreditation standards, ensuring the accuracy and traceability of the temperature measurement devices. The contract is categorized as a subcontract and is designated as a Total Small Business Set-Aside under the SBA guidelines, indicating that only small businesses are eligible to compete. The work is to be conducted for the Department of Defense, specifically through the W6QM Micc-Dugway Proving Ground agency, with the place of performance located in Tooele, Utah, ZIP code 84074. The NAICS code associated with this contract is 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance services. The contract was posted on June 2, 2026, and further details or updates can be accessed through the designated federal contractor portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Mass Flow Meter and Controller CalibrationThis contract involves the performance of ISO 17025 accredited calibration services for mass flow meters and controllers. The scope includes not only the calibration process itself but also the necessary documentation and labeling to ensure compliance with quality standards. The contract is categorized as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, making it specifically available for small businesses to compete. The work will be conducted in Tooele, with the zip code 84074, under the oversight of the Department of Defense, specifically the W6QM Micc-Dugway Prov Grd office. The contract falls under the NAICS code 811310, related to commercial and industrial machinery repair and maintenance. The solicitation was posted on June 2, 2026, but no solicitation number or specific point of contact details are provided in the contract data. This opportunity emphasizes maintaining accredited standards to ensure the precision and reliability of mass flow measurement equipment critical for defense-related applications.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE