Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of The Treasury was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

NIST-Traceable Calibration Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 10 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 11 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 15 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Material Testing Services
CITY OF WACO

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # RFP2026-08AM
California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
International
Water Treatment & Chemical Dosing SystemsThis subcontract for Water Treatment and Chemical Dosing Systems involves providing specialized maintenance for automated chemical dosing systems on facility projects for the City and County of Swansea. The scope of work includes calibrating dosing pumps, testing and balancing pool water chemistry, and repairing dosing controllers and sensors. A critical component of the contract is ensuring strict compliance with health and safety standards regarding the handling of hazardous chemicals. The selected provider is responsible for delivering fully calibrated dosing systems and detailed water quality compliance reports. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The project falls under NAICS code 541380 and is designed to support prime contractors operating within the City and County of Swansea.
City & County of Swansea

POSTED

about 19 hours ago

DEADLINE

in 26 days
NAICS: 541380
New
International
Groundwater Sampling and Compliance TestingThis subcontract opportunity involves providing groundwater sampling and contaminant analysis for prime contractors working on projects for the Government of Ontario's Ministry of Environment, Conservation and Parks. The selected provider will be responsible for conducting quarterly water sample collection and analysis to ensure strict adherence to the City of Peterborough's municipal sewer use by-laws and Discharge Permit. To qualify for this engagement, the service provider must hold an accredited environmental laboratory certification. Key deliverables include the submission of quarterly analytical reports and formal compliance certifications. Interested parties must submit their responses by November 27, 2026.
Environment, Conservation and Parks

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Asphalt and Concrete Materials TestingThis subcontract for Asphalt and Concrete Materials Testing involves providing specialized laboratory testing and calibration services for prime contractors working on Virginia Department of Transportation projects in Prince William County. The scope of work includes the preparation of job-mix formulas for asphalt and Crushed Hydraulic Cement Concrete, aggregate property testing, and ignition furnace calibration in accordance with VTM 102. To be eligible, the contractor must operate a VDOT-approved testing laboratory and be capable of delivering certified test results and approved job-mix formulas. The solicitation was posted on October 27, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.
Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

This contract entails providing initial and annual calibration services for an environmental chamber, ensuring the measurements of temperature and humidity meet NIST-traceable standards. The calibration aims to maintain precise compliance with the specified tolerances to guarantee reliable and accurate environmental testing conditions. The opportunity is classified as a total small business set-aside under SBA regulations (FAR 19.5) and falls within the NAICS code 541380, which pertains to testing laboratories. The contract is issued by the Department of the Treasury’s Office of the Chief Procurement Officer, with performance expected in Washington, ZIP code 20228. Responses are due by June 18, 2026, following the posting on June 2, 2026.

General Info

Provide NIST-traceable calibration for environmental chamber, small business set-aside, due June 18, 2026.

Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Documents

This scope was carved out of 2031ZA26Q00098 .

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Cancellation of Solicitation 2031ZA26Q00098 – Environmental Chamber

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Initial and annual NIST-traceable calibration of the environmental chamber to ensure compliance with specified temperature and humidity tolerances.

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

NAICS: 541990
New
Federal
Maintenance Service for Portable Fire Extinguishers - BPA
Solicitation # 2031ZA27Q00004
Solicitation 2031ZA27Q00004 is a request for quotations for a single-award, firm-fixed-price Blanket Purchase Agreement (BPA) to provide non-personal maintenance services for approximately 1,220 portable fire extinguishers at the Bureau of Engraving and Printing (BEP) DC Facility in Washington, D.C. The contract is a 100% small business set-aside under NAICS 541990. The period of performance spans five years, from December 1, 2026, through November 30, 2031, and is structured around annual BPA calls for inspections and as-needed calls for testing, repairs, and replacements. All work must be performed in accordance with NFPA-10 and OSHA 29 CFR Part 1910 standards. The scope of work includes annual inspections, tagging, plastic seal replacement, six-year teardowns, and hydrostatic testing at five and twelve-year intervals. Award will be granted to the offeror with the lowest priced, technically acceptable offer and no adverse past performance. Proposals must be submitted in two separate volumes, with a five-page limit for the technical volume. Technical capability may be demonstrated through the experience and ICC/NAFED certifications of the contractor or their subcontractors. Invoicing is to be processed electronically via the Invoice Processing Platform (IPP).
All Other Professional, Scientific, and Technical Services

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
Federal
NOTICE OF INTENT TO SOLE SOURCE - BEP SPARE PARTS
Solicitation # 2031ZA27N00004
The Department of the Treasury, acting on behalf of the Bureau of Engraving and Printing Office of Supply Chain Management, intends to award a sole-source, firm-fixed-price contract to Koenig & Bauer Banknote Solutions SA. This acquisition is for specific proprietary spare parts, including ink knives, carbide blades, and driving shafts used for SOI III, IFS, and COPE equipment. The procurement is being conducted under FAR Part 12 procedures for commercial products, with the government exercising its discretion to bypass competitive bidding. Interested parties must be active in the System for Award Management and submit written responses via email to the designated points of contact. All submissions must be received by 12:00 PM EST on October 28, 2026. The performance of this contract will take place in Fort Worth, Texas, and any costs incurred during the response process are the sole responsibility of the respondent.
All Other Industrial Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 332510
Federal
Fire Extinguisher and Component SupplyThis subcontract, issued by the Department of the Treasury's Office of the Chief Procurement Officer, involves the supply of UL-listed portable fire extinguishers and specialized metal replacement valves for prime contractors working on federal facility projects. The scope of work focuses on providing equipment to replace units that are beyond economical repair or have failed hydrostatic testing, ensuring all hardware strictly adheres to NFPA-10 and OSHA standards. The opportunity is designated as a total Small Business Set Aside under NAICS code 332510, with the place of performance located in Washington. Interested parties must submit their responses by October 30, 2026, following the posting date of October 19, 2026.
Hardware Manufacturing

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 561790
Federal
Portable Fire Extinguisher Maintenance and CertificationThis subcontract opportunity, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves the annual inspection, tagging, and maintenance of portable fire extinguishers for prime contractors on federal facility projects in Washington. The scope of work includes performing annual inspections, six-year teardowns, and hydrostatic testing in strict accordance with NFPA-10 and OSHA 29 CFR Part 1910 standards. The selected provider must deliver inspected and tagged equipment along with certified maintenance records and comprehensive annual equipment reports. To qualify for this Small Business Set Aside, contractors must possess the necessary hydrostatic testing equipment and hold ICC and/or NAFED certifications. Interested parties must submit their responses by October 30, 2026. The contract falls under NAICS code 561790 and is specifically designated for small business entities.
Other Services to Buildings and Dwellings

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 236220
Federal
Cooling Tower, Roofing, and Structural Construction
Solicitation # 2031ZA26R00027
Solicitation 2031ZA26R00027 is a design-build project issued by the Bureau of Engraving and Printing for the assessment, demolition, and replacement of cooling towers and associated infrastructure at the District Currency Facility Main Building in Washington, DC. The scope of work includes replacing two Evapco cooling towers and one BAC tower, along with the associated structural steel platforms, roofing, mechanical, electrical, and SCADA control systems. The project requires lead-based paint abatement and adherence to IPC, ASHRAE, ASME, and National Electrical Code standards. The estimated contract value ranges between 1 million and 5 million dollars, with a performance period not to exceed 730 calendar days from the notice to proceed. This is a total small business set-aside under NAICS 236220. The government will utilize a best value trade-off methodology for award, where non-price factors—specifically corporate experience and past performance—are weighted more heavily than the technical approach, key personnel, project plan, and price. Proposals must be submitted in two separate volumes, with the technical volume limited to 15 pages. Per Amendment 0001, the response deadline has been extended to November 9, 2026. Awarded contractors must provide a performance bond for 10 percent of the contract amount and comply with Davis-Bacon Wage Determinations.
Commercial and Institutional Building Construction

POSTED

20 days ago

DEADLINE

in 12 days
View Details
NAICS: 423610
Federal
Deicing and Pre-treatment Material SupplyThis subcontract opportunity, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves the supply of bulk deicing and pre-treatment materials for prime contractors working on Bureau of Engraving and Printing facility projects in Washington. The selected provider will be responsible for delivering industrial grade salt, brine, or other approved deicing agents that strictly adhere to the specifications outlined in the Performance Work Statement. The contract is designated as a total Small Business Set Aside under NAICS code 423610. Interested parties must submit their responses by October 30, 2026, to ensure the delivery of specified quantities of materials to the prime contractor or designated project sites.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

22 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
Federal
Off-Site Snow Hauling and DisposalThis small business set-aside subcontract, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves off-site snow hauling and disposal for Bureau of Engraving and Printing facility projects in Washington. The selected contractor will be responsible for loading accumulated snow into dump trucks using front-end loaders and transporting the material to a compliant off-site disposal location, providing formal documentation for every truckload removed. All personnel assigned to the project must strictly adhere to BEP security protocols to ensure facility safety. Interested parties must submit their responses by October 30, 2026, under NAICS code 484220.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

22 days ago

DEADLINE

in 3 days
View Details
NAICS: 561730
Federal
Ice Control and Deicing ServicesThis subcontract for Ice Control and Deicing Services, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves providing and applying deicing and pre-treatment materials for prime contractors at Bureau of Engraving and Printing facilities in Washington. The selected provider will be responsible for ensuring walkways and driving surfaces remain ice-free during government-authorized events using approved chemicals and spreader equipment. The opportunity is designated as a total Small Business Set Aside under NAICS code 561730. All personnel performing the work must strictly adhere to security protocols and maintain visible identification badges while on-site. Responses for this requirement are due by October 30, 2026.
Landscaping Services

POSTED

22 days ago

DEADLINE

in 3 days
View Details
NAICS: 561730
Federal
Snow Removal and Plowing ServicesThis subcontract for Snow Removal and Plowing Services is issued by the Department of the Treasury's Office of the Chief Procurement Officer for projects at the Bureau of Engraving and Printing facility in Washington, DC. The selected contractor will provide essential snow removal and plowing services for prime contractors, ensuring safe access and egress to main and annex buildings. The scope of work includes managing snow accumulation from 0 to over 10 inches using specialized equipment such as snow plows, blowers, and removal machinery. This opportunity is designated as a Total Small Business Set Aside under NAICS code 561730. All personnel assigned to the project must strictly adhere to BEP security protocols, including the requirement to wear visible identification badges at all times. The response deadline for this solicitation is October 30, 2026.
Landscaping Services

POSTED

22 days ago

DEADLINE

in 3 days
View Details
NAICS: 561730
Federal
DCF Snow and Ice Removal Services
Solicitation # 2031ZA27Q00002
The Bureau of Engraving and Printing is soliciting a firm-fixed-price purchase order for snow and ice removal services at the District Currency Facility in Washington, D.C. This total small business set-aside under NAICS 561730 requires the contractor to provide all personnel, equipment, and materials to ensure safe access and egress to the main and annex buildings. The period of performance consists of one base year starting November 20, 2026, with four subsequent option years, extending the potential contract through November 19, 2031. The contractor must maintain 24/7 operational readiness from November 20 through April 20 each year to perform seasonal readiness, ice control, snow removal based on accumulation levels, and off-site snow hauling. Award decisions are based on a tradeoff between technical capability and approach, past performance, and price, with technical and past performance factors being significantly more important than price. Additionally, offerors must demonstrate compliance with Treasury APU 26-01, including a certification that the small business prime contractor will perform at least 51 percent of the cost of contract performance for personnel. The contractor is responsible for developing a Quality Control Plan within 30 days of award and must adhere to strict security protocols, including the prohibition of weapons on BEP premises and the use of visible identification badges. Invoicing is managed electronically through the Invoice Processing Platform.
Landscaping Services

POSTED

22 days ago

DEADLINE

in 3 days
View Details
NAICS: 541611
Federal
Supply Chain Strategy & Diversification ConsultantThe Supply Chain Strategy and Diversification Consultant subcontract, issued by the Department of the Treasury's Office of the Chief Procurement Officer, focuses on enhancing the resilience of currency production projects for the Bureau of Engraving and Printing. The selected consultant will perform detailed supply chain analyses for prime contractors, specifically mapping global fiber supply chains and utilizing market intelligence tools to identify alternative raw material sources. The primary objective is to mitigate risks associated with single-source dependency. Qualified candidates are expected to hold professional procurement certifications, such as the CPSM, to ensure high-level strategic execution. The final deliverables for this engagement include a comprehensive supply chain diversification report and a set of formal procurement strategy recommendations. This opportunity falls under NAICS code 541611, with a response deadline set for December 11, 2026.
Administrative Management and General Management Consulting Services

POSTED

30 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
Federal
Substrate Technical Testing & Certification ServicesThe Substrate Technical Testing and Certification Services subcontract supports the Department of the Treasury's Bureau of Engraving and Printing by providing essential laboratory testing and technical analysis for currency projects. The selected provider will perform durability, wear-and-tear, and security feature integration testing utilizing chemical analysis and specialized stress-testing equipment. To ensure the highest standards of quality and accuracy, the contractor must maintain ISO/IEC 17025 certification. Managed by the Office of the Chief Procurement Officer under NAICS code 541380, the contract requires the delivery of comprehensive technical reports, validation data, and official certification documents. The solicitation was posted on September 28, 2026, with a response deadline of December 11, 2026. Performance of these technical services will take place in the 77416 zip code area.
Testing Laboratories and Services

POSTED

30 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Counterfeit Electronic Parts Detection and Reporting Services
FA8250 Afsc Pzaaa

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Post-Installation Qualification and Performance Verification
Acquisitions - Aqm Momentum

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Counterfeit Parts Detection and Prevention
NASA Shared Services Center

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Backflow Prevention Testing and Certification Services
261-NETWORK Contract Office 21 (36C261)

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Qualification Testing Services for Aerospace Components
Ut DLA Aviation At Ogden

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Water Quality Testing
Network Contract Office 23 (36C263)

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Federal
Technical Evaluation and Conformance Testing Services
Ofc Of Acqusition Grants-National

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
Federal
Quality Assurance & First Article Testing (FAT) Support
DLA Aviation

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Non-Destructive Testing (NDT) Services
DLA Aviation

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
First Article Testing and Quality Inspection Support
DLA Troop Support

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Testing, Preservation, and Packaging of Engine Components
FA8121 Afsc Pzaaa

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Calibration & Metrology Services
FA8571 Maintenance Contracting Afsc Pzim

POSTED

5 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS