This Solicitation opportunity from Department Of Defense was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NO LE ASSY, MAIN, AI

Closed

SPE4A6-26-T-49C9Federal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

Manufacturing of Flight-Critical Pivot Supports

Navsup Weapon Systems Support

POSTED

DEADLINE

C-UAS Hardware Prototyping and Fabrication

Office of the Secretary of Defense

POSTED

DEADLINE

Synopsis Wiring Harness , Branched

Solicitation # W58RGZ27QA001

POSTED

DEADLINE

Solicitation # N0038326QLB20

This presolicitation notice from the Department of Defense, specifically the Navsup Weapon Systems Support office in Philadelphia, is for the procurement of two ECS valves. The requirement is identified by NSN 7R-1660-016686580-P8 and reference number 423785-2, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QLB20, was posted on September 11, 2026, and has a response deadline of October 27, 2026. Interested parties should direct inquiries to the primary point of contact, Tia Johnson, via the provided email or phone contact information.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--STEERING UNIT,AIRCR, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSB15

This solicitation, issued by Navsup Weapon Systems Support, seeks a single award for the overhaul, upgrade, repair, and inspection of aircraft steering units (NSN 7RH 1620-01-475-2013). The contractor is responsible for providing all necessary labor, materials, and tooling to return 75 units to a Ready for Issue condition. Key technical requirements include compliance with MIL-STD-130 for markings, the mandatory use of SAE-AS22759 series wire in place of MIL-W-81381, and personnel certification according to IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The contract is a firm-fixed-price effort requiring government source approval prior to award. The government will evaluate proposals based on a trade-off where past performance, assessed via SPRS color-coded risk ratings, is considered more important than price. Quality assurance is strictly managed through requirements for ISO 9001/SAE AS9100 compliance and a calibration system meeting ANSI/NCSL Z540 or ISO-10012-1. Administrative details include the use of Wide Area Workflow for invoicing and a priority DO rating for national defense. The contractor must also adhere to strict packaging standards per MIL-STD-2073-1 and marking requirements per MIL-STD-129.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRPA126RUC24

Solicitation SPRPA1-26-R-UC24 is a request for proposal issued by DLA Aviation at Philadelphia for the procurement of APS Pallets, identified by NSN 1680-01-633-8682. This unrestricted procurement requires the delivery of newly manufactured spares, as refurbished or repaired materials are strictly prohibited. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) color rating scale. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with additional requirements for wood packaging materials to comply with ISPM 15. Inspection and acceptance will occur at the origin, and the contractor must maintain a recognized quality management system such as ISO 9001 or SAE AS9100. Deliveries are designated as FOB Origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS cybersecurity and Buy American regulations.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QA117

Navsup Weapon Systems Support

POSTED

DEADLINE

PANEL, STRUCTURAL, AIRCRAFT / NSN 1560-01-646-5571 / B-52 AIRCRAFT

Solicitation # SPE4A727R0101

POSTED

DEADLINE

Solicitation # 70Z03827QB0000010

Solicitation 70Z03827QB0000010 is a combined synopsis and request for quotation issued by the Department of Homeland Security's Aviation Logistics Center for MH-65 spare parts. The requirement is structured as a total small business set-aside and is anticipated to be awarded on a sole source basis to Airbus Helicopters, Inc. as a firm-fixed price purchase order. The government requires new manufactured commercial items with clear, documented, and auditable traceability to the Original Equipment Manufacturer, Airbus Helicopters France. No substitute or alternate parts will be accepted, and all items must be approved according to Federal Aviation Administration guidelines and include a Certificate of Conformance. The award will be based on the determination of fair and reasonable pricing and the technical ability to provide exact OEM part numbers. The contract includes an option for increased quantity for Line Item 1, allowing the government to increase the quantity by up to twenty units, for a maximum of thirty, by December 31, 2026. Delivery will be made to the USCG Aviation Logistics Center, with inspection and acceptance performed by local USCG Quality Assurance personnel. Quotations and inquiries must be submitted via email to the designated point of contact by October 30, 2026, at 12:00 pm EDT.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

FILTER ELEMENT, FLUID / QPL NSN 1650-00-484-6918 / B-52 AIRCRAFT

Solicitation # SPE4A727R0088

The Department of Defense, through DLA Aviation, intends to establish a five-year Indefinite Quantity Contract for fluid filter elements (NSN 1650-00-484-6918) used in B-52 aircraft. The estimated annual quantity is 1,520 units, with production units designated as FOB Destination and inspection at origin. This item is classified as an Air Force Critical Safety Item and is subject to surge requirements. The procurement is limited to Qualified Products List sources, specifically PTI Technologies and Pall Aeropower, as the government does not possess complete technical data. Other interested contractors must submit a Source Approval Request package for consideration. The solicitation is expected to be issued on November 13, 2026, and may utilize a reverse auction process. All potential awardees must be registered in the System for Award Management.

POSTED

DEADLINE

Solicitation # SPRPA127QYA44

Solicitation SPRPA1-27-Q-YA44 is issued by the DLA Aviation office in Philadelphia under Emergency Acquisition Flexibilities for the overhaul, upgrade, repair, testing, and inspection of one Recovery Sequencer, identified by NSN 1680-99-753-8672 and Part Number MBEU241040. The contractor, identified as Martin-Baker Aircraft Company Limited in the United Kingdom, is responsible for providing all necessary facilities, labor, materials, and tooling to return the item to a Ready For Issue condition in accordance with the latest technical publications. The scope includes strict adherence to configuration management, quality systems meeting ISO 9001/SAE AS9100 standards, and specific protocols for handling items that are Beyond Economical Repair or Missing on Induction. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as more important. Deliveries are required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin using the contractor's equipment. Packaging must comply with MIL-STD-2073 and marking must follow MIL-STD-129, including specific DLR labeling requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with Buy American and specialty metals restrictions. All repairs must be performed at the identified facility in the United Kingdom, and any deviations from approved procedures require formal government acceptance.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply and Certification of Offshore Aviation Safety Gear

Marine Resources

POSTED

about 11 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract pertains to the procurement of a Nozzle Assembly, Main, AI under NSN 1680-01-566-5095 and P/N 4500228A, with a quantity of 41 units to be delivered FOB origin to the DLA Distribution facility in New Cumberland, PA, with a delivery window of 528 days after order date, targeting October 26, 2027. The item is classified as a commercial item and is subject to stringent technical and quality requirements sourced from the DLA Master List of Technical and Quality Requirements, identified by R and I numbers including RA001, RD002, RP001, RD004, RQ017, RQ002, and RQ011. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment and implementation of NIST SP 800-171 controls as required by DFARS 252.204-7012, with additional obligations for safeguarding covered defense information, reporting cyber incidents, and limiting the use of reported cyber data. Packaging and marking must comply with MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with bare item marking required per RQ017 and no special marking code applied. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively with corresponding AQLs of 0.1, 1.0, and 4.0. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i) at the service customer’s request. The contract incorporates numerous FAR and DFARS clauses covering whistleblower rights, former DoD official compensation restrictions, controlled government work product, hazard communication, information disclosure, and payment levy protections. Invoicing is to be performed exclusively through Wide Area WorkFlow (WAWF), and the offeror must provide a UEI and CAGE code along with appropriate socioeconomic certifications if claiming small business status. All proposals must be submitted electronically via DIBBS by the stated deadline, and the contract type remains unspecified. No pricing details are populated in the

General Info

Procurement of 41 NO LE ASSY units, delivered by October 26, 2027, with strict quality and cybersecurity compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE4A6-26-T-49C9 for DLA Aviation

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 7

Combined Synopsis

Type ChangedMay 15

Combined Synopsis → Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Crystal Kump

contact@example.gov

+1 (555) 000-0000

Full Description

NO LE ASSY,MAIN,AI
NOZZLE ASSY, MAIN, AI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE4A6-26-T-49C9
SECTION B
RTX CORPORATION 55820 P/N 4500228A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016707723 0001 EA 41.000
NSN/MATERIAL:1680015665095
DELIVERY (IN DAYS):0528
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:EC OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-49C9
SECTION B
PR: 7016707723 PRLI: 0001 CONT’D
Need Ship Date:10/26/2027 Original Required Delivery Date:10/26/2027
SPE4A6-26-T-49C9 NSN/Part Number: 1680-01-566-5095 Quantity: 41 EA Purchase Request: 7016707723QTY: 41 Delivery: 528 days ADO