Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on April 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Non-Destructive Testing and Quality Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 12 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.
OC Waste & Recycling

POSTED

about 13 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Environmental & Material Testing Services
Warren County

POSTED

about 14 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.
City of Virginia Beach

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 16 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
DIBBS
Medical Device Sterilization and Packaging
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
DIBBS
First Article Test (FAT) and Certification
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
DIBBS
Critical Application Testing and Quality Assurance
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
DIBBS
Electrical Cable Assembly Quality Validation and PLT
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract solicits non-destructive testing and quality inspection services for connector plates, requiring full compliance with military standards and engineering drawing specifications. Scope of work includes performing non-destructive testing, dimensional verification, material certification, and comprehensive quality testing to ensure conformance to technical requirements. The effort is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 541380 for engineering services. Performance must occur at the specified location with ZIP code 20640, associated with the Naval Surface Warfare Center Indian Head Division under the Department of Defense. The opportunity was posted on April 28, 2026, with a response deadline of May 5, 2026, at 2:00 PM. All submissions must meet stringent quality and procedural requirements to qualify for award.

General Info

Small business subcontract for military-grade connector plate inspections at Naval Surface Warfare Center Indian Head Division.

Agency

Department Of Defense → Nswc Indian Head Division

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MD, 20640, USA

Set-Aside

SBA

Documents

This scope was carved out of N0017426Q1021.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MK77 Anodes

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Nswc Indian Head Division
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform NDT, dimensional verification, material certification, and quality testing of connector plates per military standards and engineering drawing requirements.

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 332994
New
Federal
MK 38 FY27 Conversion Kits
Solicitation # N00174-26-RFPREQ-W82-0028
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
Federal
Yorkie Pro cell phone detector
Solicitation # N00174-27-SIMACQ-105-0003
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561611
New
Federal
Fingerprint Services
Solicitation # N00174-26-SIMACQ-105-0004
Investigation and Personal Background Check Services

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 333415
New
Federal
Compressor Units and Spares
Solicitation # N00174-26-RFPREQ-M3-0021
The Naval Surface Warfare Center Indian Head Division seeks to acquire Trane Original Equipment Manufacturer compressor units and spare components to serve as direct replacements for existing HVAC systems. This requirement is being pursued as a sole source procurement under the statutory authority of 10 USC 3204(a)(1), with the intent to award a Firm Fixed Price Indefinite Delivery Indefinite Quantity contract to Boland Trane Services, Inc. located in Gaithersburg, Maryland. The procurement is categorized under NAICS code 333415 and PSC code 4120. While this notice is not a request for competitive proposals, the government will consider responses submitted to Bridget Taylor-Shackelford by 3:00 p.m. EST on November 9, 2026. The final determination to compete the requirement remains at the sole discretion of the government.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 12 days
View Details
NAICS: 513210
New
Federal
MATLAB Software Subscription Renewal
Solicitation # N00174-27-SIMACQ-W1-0006
The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to The MathWorks, Inc. for MATLAB software subscriptions and associated proprietary toolboxes. This sole source procurement is based on the determination that The MathWorks, Inc. is the only source capable of meeting the government requirements as the sole owner and distributor of the software for Department of Defense acquisitions. The requirement is classified under NAICS code 513210 and Product Service Code DA10. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Shannon Wooten by November 04, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is necessary, though the final decision remains at the discretion of the government.
Software Publishers

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 325920
Federal
Squibs for Fire Sprinkler Valves
Solicitation # N00174-27-SIMACQ-102-0051
The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.
Explosives Manufacturing

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 513210
Federal
Gyrus Qual Cert Tracking & Training Platform
Solicitation # N00174-27-SIMACQ-IHD-M-Dept-0004
The Naval Surface Warfare Center Indian Head Division intends to award a noncompetitive, firm fixed price purchase order to Manan LLC dba Gyrus Systems for the Gyrus Qual Cert Tracking and Training Platform. As the original equipment manufacturer and sole owner of the GyrusAim software, Manan LLC is identified as the only source capable of providing the proprietary licenses, source code packages, and certified technical support necessary for implementation within the government's IL5 environment. This procurement is being conducted under FAR 13.106 (b) and 10 U.S.C. 3204 (C) (1) due to the proprietary nature of the required materials. This notice serves as an intent to sole source rather than a request for quotes. Interested parties wishing to challenge this determination must provide clear and convincing evidence of their capability to respond to the requirement by November 3, 2026, at 10:00 AM EST. All responses must be submitted via email to the designated point of contact and the vendor must be registered in the System for Award Management. The government maintains full discretion on whether to proceed with a competitive procurement based on the information received.
Software Publishers

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 332710
Federal
Body, Retainer, and Gasket
Solicitation # N0017426Q1120
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.
Machine Shops

POSTED

20 days ago

DEADLINE

in 8 days
View Details
NAICS: 325920
Federal
Loaded Cartridge Assembly (MC91) for MK 5 Mod ) Explosive Bolt
Solicitation # N00174-26-RFPREQ-W71-0030
The Naval Surface Warfare Center, Indian Head Division is conducting market research to identify capable vendors for the Loaded Cartridge Assembly, DODIC MC91. This assembly must be compatible with the MK 5 MOD 0 Explosive Bolt used in the AN/BST-1 Buoy system and adhere to specific technical criteria including WS6061 and WS6052. The anticipated procurement involves 100 production units plus all necessary destructive test samples, encompassing the full process of manufacture, nondestructive testing, packaging, and delivery. Interested vendors must demonstrate the ability to establish a manufacturing line and complete all deliveries within one year of award. Requirements include possessing necessary ATF licensing, specific storage capacities, and advanced inspection capabilities such as helium leak rate and real-time radiography testing. To access the restricted Technical Data Package, applicants must provide an approved DD Form 2345, a signed NDA, and an active CAGE code. Responses to the detailed capability questionnaire must be submitted in PDF format by November 9, 2026.
Explosives Manufacturing

POSTED

20 days ago

DEADLINE

in 12 days
View Details
NAICS: 541380
Federal
Precision Instrument CalibrationThis small business set-aside subcontract, titled Precision Instrument Calibration, seeks a qualified provider to perform calibration services for tools, instruments, and test equipment supporting prime contractors at the Naval Surface Warfare Center Indian Head Division. The selected provider must adhere to NAVSEA Calibration System Requirements H-246-H001 and utilize certified calibration standards to ensure all measurement and diagnostic equipment is accurately serviced. Additionally, the contractor must meet the Commercial Service Provider definitions outlined in OPNAVINST3960.16 and is responsible for delivering both certified equipment and official calibration certificates. Managed by the Department of Defense under NAICS code 541380, the opportunity was posted on October 6, 2026, with a response deadline of November 5, 2026. This procurement is specifically designated as a total set-aside for small businesses to support critical technical operations within the Nswc Indian Head Division.
Testing Laboratories and Services

POSTED

22 days ago

DEADLINE

in 8 days
View Details
NAICS: 332813
Federal
Chemical Conversion and Anodizing ServicesThis small business set-aside subcontract for the Department of Defense involves providing chemical conversion and anodizing services for the Naval Surface Warfare Center Indian Head Division. The selected contractor will perform surface treatments on machined hardware for prime contractors, utilizing anodizing tanks and chemical baths to apply coatings in strict accordance with MIL-A-8625 standards. Due to the nature of the work, which involves handling controlled unclassified information drawings and parts, the contractor must maintain CMMC Level 2 certification. The project falls under NAICS code 332813, with a response deadline of November 5, 2026. The final deliverable for this engagement is the provision of properly surface-treated hardware components.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

22 days ago

DEADLINE

in 8 days
View Details
NAICS: 333249
Federal
Manufacturing and Inspection Tooling FabricationThis small business set-aside subcontract involves the design and fabrication of specialized manufacturing and inspection tooling for prime contractors supporting the Naval Surface Warfare Center Indian Head Division. The scope of work includes the development of manufacturing jigs, fixtures, and dimensional inspection gauges to ensure part compliance, utilizing precision grinding equipment and CAD/CAM software. The project requires strict adherence to CMMC Level 2 and NIST SP 800-171 R2 security standards. Interested parties must submit their responses by November 5, 2026, to provide the completed tooling deliverables under NAICS code 333249 for the Department of Defense.
Other Industrial Machinery Manufacturing

POSTED

22 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Hydrostatic Testing Services
Imr Northern ROCKIES(12200)

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Calibration Services for Test Systems
NASA Johnson Space Center

POSTED

6 months ago

CLOSED

10 months ago
View Details
NAICS: 541380
Federal
Sediment Testing and Laboratory Analysis
W2SD Endist Philadelphia

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
Federal
Laboratory Sampling and Analysis Services
Ibc Acq Svcs Directorate (00004)

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Inspection and Testing Services
SPRMM1 DLA Mechanicsburg

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Fuel Quality Control and Laboratory Testing Services
DLA Energy

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
On-Site Installation Support – Field Engineering Services
NASA Shared Services Center

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Wet Laboratory Access and Support
National Oceanic And Atmospheric Administration

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Supply Chain Security and Anti-Counterfeit Compliance
Dcso-p New Cumberland

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Calibration Services for Test Equipment
Al DLA Aviation At Huntsville

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Material Certification and Compliance Documentation
DLA Maritime - Portsmouth

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Third-Party Testing Services for Construction Materials
Nps Conops Strategic DOI

POSTED

6 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS