Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) and Quality Certification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of non-destructive testing and final quality inspection services on turbine rotor blades, specifically utilizing ultrasonic, dye penetrant, and X-ray techniques to ensure compliance with military airworthiness and Defense Logistics Agency certification standards. All work must be conducted to meet rigorous defense-quality requirements, with a primary focus on ensuring the structural integrity and reliability of components critical to aviation systems. The place of performance is designated as Richmond, Virginia, with the work falling under NAICS code 541380 for other scientific and technical consulting services. This is a subcontract opportunity issued under the Department of Defense, with DLA Aviation as the overseeing agency, and the solicitation was posted on June 26, 2026.

General Info

Non-destructive testing on turbine blades in Richmond, Virginia, per DLA Aviation military standards using ultrasonic, dye penetrant, and X-ray methods.

Agency

Department Of Defense → DLA Aviation

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Richmond, VA, 23237, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A526R0117.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NSN2835-00-943-2216, BLADE,TURBINE ROTOR, WSDC: 22F, HELICOPTER, IROQUOIS HH/UH-1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 26

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform NDT (ultrasonic, dye penetrant, X-ray) and final quality inspection of turbine rotor blade to meet military airworthiness and DLA certification standards.

Similar Contracts

Same NAICS industry code

Specialized Testing Laboratory (First Article Test)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Inspection Services

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

Specialized Testing and Certification ServicesThis subcontract for Specialized Testing and Certification Services involves performing First Article Testing for prime contractors on DLA Troop Support projects. The primary objective is to validate hoisting beam specifications by executing tests under CLIN 0002, utilizing calibrated measurement equipment and load testing rigs to ensure dimensional accuracy, load capacity, and overall structural integrity. The selected provider is responsible for delivering an approved First Article along with a comprehensive FAT Certification Report and certification of compliance. This project is managed under the Department of Defense for Construction and Equipment Manufacturing and is to be performed in Tracy, California.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

CASE,OPTICAL INSTRUMENT

Solicitation # SPE4A727R0097

The Defense Logistics Agency is conducting market research through a sources sought notice, identified by solicitation number SPE4A727R0097, to identify capable providers for the manufacture and supply of optical instrument cases. The specific requirement is for part number OFM-2054-A1, NSN 5855-01-609-6252, with an estimated quantity ranging from a minimum of 76 to a maximum of 305 units. While L3 Technologies, Inc. is currently the only approved source of supply, the government is seeking information to determine the procurement method, which may result in a small business set-aside or full and open competition with the possibility of multiple awards. The applicable NAICS code for this procurement is 333310. Prospective contractors must demonstrate the capacity to provide all labor, materials, facilities, and equipment necessary for the new manufacture of the items, including component procurement, inspection, testing, packaging, and shipping. Responsibilities may also extend to supply chain management, logistics planning, and addressing diminishing manufacturing sources. Interested parties must submit their organization's details and a tailored capability statement to Montana Kipp via email by October 28, 2026. This process is purely voluntary and does not constitute a formal request for proposals; unit pricing will be established only at the time of a future contract award.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

AIRCRAFT, STRATOLIFTER, C/KC-135; IGNITER, SPARK, A/C HEATER

Solicitation # SPE4A727R0074

Aircraft Manufacturing

POSTED

about 7 hours ago

DEADLINE

NSN 6150-21-920-2797 - CABLE ASSEMBLY, SPECIAL ELECTRI

Solicitation # SPE4A6-27-R-0079

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 28 special purpose electrical cable assemblies used in Aircraft Launch and Recovery Equipment. The requirement specifies Idal Technologies Inc. as an approved source for part number 6537C026-2. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 28 units. Delivery is set as FOB Origin with a required delivery schedule of 422 days after receipt of order to various facilities within the Continental United States. While the total value is not expected to exceed the TINA threshold, offerors should be prepared to provide certified cost and pricing data. Electronic offers are not acceptable, and completed solicitation packages must be submitted. The solicitation is expected to be issued around November 13, 2026, with a response deadline of December 14, 2026.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months

AIRCRAFT, STRATOFORTRESS, B-52; SUPPORT, ENGINE MOUNT

Solicitation # SPE4A727R0073

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months

PANEL, STRUCTURAL, AIRCRAFT / NSN 1560-01-646-5571 / B-52 AIRCRAFT

Solicitation # SPE4A727R0101

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months

FILTER ELEMENT, FLUID / QPL NSN 1650-00-484-6918 / B-52 AIRCRAFT

Solicitation # SPE4A727R0088

The Department of Defense, through DLA Aviation, intends to establish a five-year Indefinite Quantity Contract for fluid filter elements (NSN 1650-00-484-6918) used in B-52 aircraft. The estimated annual quantity is 1,520 units, with production units designated as FOB Destination and inspection at origin. This item is classified as an Air Force Critical Safety Item and is subject to surge requirements. The procurement is limited to Qualified Products List sources, specifically PTI Technologies and Pall Aeropower, as the government does not possess complete technical data. Other interested contractors must submit a Source Approval Request package for consideration. The solicitation is expected to be issued on November 13, 2026, and may utilize a reverse auction process. All potential awardees must be registered in the System for Award Management.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months

Specialized Hardware & Fittings Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Aircraft Engine/Transmission Components Supply

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Aircraft Hardware & Fasteners Supply

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Hydraulic & Pneumatic Component Supply

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

AIRCRAFT, FIGHTING FALCON F-16; HOUSING, ANTIFRICTION BEARING

Solicitation # SPE4A727R0029

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

6220-01-473-2116; 26F; F-16 AIRCRAFT

Solicitation # SPE4A627R0181

DLA Aviation Richmond is conducting market research through a sources sought notice to identify qualified parties capable of providing indicating panels for F-16 aircraft, identified by NSN 6220-01-473-2116. This effort is categorized under NAICS code 336320. The primary goal of this research is to determine the most effective procurement method, which may result in a small business set-aside or full and open competition, with the possibility of multiple awards. Interested organizations must submit their company details and tailored capability statements to Patsy Bedford by November 2, 2026. The government will evaluate submissions based on the provider's technical resources, financial stability, human capital, and ability to implement a project management plan that ensures cost containment and schedule compliance. This notice is for information gathering only and does not constitute a formal request for proposals or a solicitation.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Analytical Reporting and Data Management

Office Of Acquisiton Grants

POSTED

CLOSED

Soil Physical Properties Analysis

Office Of Acquisiton Grants

POSTED

CLOSED

Plant Tissue Chemical Analysis

Office Of Acquisiton Grants

POSTED

CLOSED

Soil Nutrient and Elemental Analysis

Office Of Acquisiton Grants

POSTED

CLOSED

Material Certification and Compliance Documentation Services

NASA Shared Services Center

POSTED

CLOSED

NDT Procedure Development for Aircraft Systems

FA8609 Aflcmc Wlck KC46

POSTED

CLOSED

Precision Metrology and Quality Assurance Services

NASA Shared Services Center

POSTED

CLOSED

Vacuum and DC Magnetron Sputtering Compatibility Testing

NASA Shared Services Center

POSTED

CLOSED

Radioactive Materials Notification and Handling

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Small Business or DBE Participation Support

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Material Notification and Labeling (If Applicable)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS