Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) & Quality Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of non-destructive testing and dimensional inspection on finished clevis fittings to verify compliance with military standards, ensuring structural integrity and operational reliability. The work involves rigorous inspection protocols to detect flaws or deviations without compromising the components, aligning with specific defense requirements for safety and performance. All inspections must be conducted in accordance with established military specifications and documented to demonstrate adherence to quality assurance benchmarks. This subcontract is issued under the NAICS code 541380 for other scientific and technical consulting services and is administered by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 16, 2026, and while details such as location and point of contact are not specified, performance is expected to meet the stringent criteria set by the military for critical components. The contract is not designated for any specific set-aside category and is accessible through the official DIBBS portal for tracking and award information.

General Info

Non-destructive testing and dimensional inspection of clevis fittings per military standards for safety and compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A526F6459.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLEVIS FITTING, AIRC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform non-destructive testing and dimensional inspection of finished clevis fittings to ensure compliance with military standards.

Similar Contracts

Same NAICS industry code

Combines Synopsis Solicitation- NULISAseq Inflamma

Solicitation # 75N98026Q01133

Solicitation number 75N98026Q01133 is a combined synopsis and solicitation for commercial items issued by the National Institutes of Health under the Department of Health and Human Services. This acquisition, titled NULISAseq Inflamma, is being conducted as a non-competitive notice of intent to award a contract or purchase order without full or open competition. The procurement is managed under FAR Part 12.603 for streamlined commercial products or services and is not expected to exceed the simplified acquisition threshold. The project falls under NAICS code 541380 and is managed by the office located in Bethesda, Maryland. Interested parties must submit their proposals by the response deadline of September 11, 2026. Van V Holley serves as the primary point of contact for this action, which utilizes the statutory authority of FAR 6.302-3(a)(2)(ii) and 41 U.S.C. 1901.

National Institutes Of Health Olao

POSTED

about 8 hours ago

DEADLINE

Leak Survey Contract - Aquarion Water Authority

Solicitation # 2026-08-31-002

The Aquarion Water Authority is seeking proposals for a multi-year Leak Survey Contract under solicitation number 2026-08-31-002. The selected contractor must utilize specialized electronic equipment to identify sounds and frequencies associated with leaks in underground water infrastructure. Work is to be performed year-round during normal business hours, primarily focusing on the eastern, western, and central areas of the authority's territory, with occasional requirements in the northern and Mystic regions. All bids must be submitted through the E-Bid system by the closing deadline of 2:00 PM on September 18, 2026. Requests for clarification must be submitted via the portal by 2:00 PM on September 11, 2026. Notably, bid, performance, and payment bonds are not required for this project, and submitted bids cannot be withdrawn within sixty days following the closing date. Contact for the procurement process is Ken Feldkamp.

Aquarion Water Company

POSTED

about 8 hours ago

DEADLINE

Inspection and Aerial Device Non-Destructive Test on Three Ladder Fire Trucks

Solicitation # M6740026Q0030

Solicitation M6740026Q0030, issued by the Department of Defense Commanding Officer, seeks a contractor to perform inspection and aerial device non-destructive testing on three ladder fire trucks. The work is to be executed in Okinawa, and the project falls under NAICS code 541380. Interested parties must submit their quotations by the deadline of September 10, 2026. Submissions must include a completed cover sheet, and any inquiries regarding the Performance Work Statement should be submitted using the provided Q&A form. Primary contact for this requirement is Nagisa Tsuhako.

Commanding Officer

POSTED

about 8 hours ago

DEADLINE

Chemical Residue and Allergen Testing in and on Food Products for Canadian Food Inspection Agency (CFIA)

Solicitation # WS5434478581

This solicitation, issued by the Department of Public Works and Government Services for the Canadian Food Inspection Agency, seeks providers for analytical and laboratory services to test chemical contaminants and allergens in food products, crops, and animal tissues. The requirement is split into two sections: Part A covers seven specific food groups, including dairy, meat, and seafood, while Part B covers 24 distinct testing programs. Bidders may apply for any combination of food groups and testing programs, and multiple contracts will be awarded, with related awards consolidated into single contracts. All bid submissions and supporting documentation must be received by October 2, 2026, at 2 p.m. EST to be considered responsive, overriding any conflicting deadlines listed on Ariba Discovery or Buyandsell. Interested parties must access the full submission details and annexes through an approved SAP Ariba account and Government of Canada profile. Technical inquiries should be directed to the CanadaBuys Service Desk, while contracting matters are handled by Sebastien Dupuis.

Department of Public Works and Government Services

POSTED

about 15 hours ago

DEADLINE

Ignition Interlock Program

Solicitation # 3524R10-1

PennDOT is soliciting proposals for a contract to provide statewide quality assurance and technical expertise for the Ignition Interlock Program. The selected contractor will serve as an expert on Pennsylvania Ignition Interlock Specifications, performing site visits to installation locations, conducting device testing, reviewing client data logs, and providing training to stakeholders. All proposals must be submitted electronically through the JAGGAER portal by the deadline of September 30, 2026. A virtual pre-proposal conference is scheduled for September 14, 2026, with RSVPs required by September 16, 2026. While there are no formal Small Diverse Business or Veteran Business Enterprise participation goals for this procurement, bidders are encouraged to utilize such subcontractors.

Department of Transportation

POSTED

about 15 hours ago

DEADLINE

IFB 4CA07924 - Water Testing

Solicitation # 4CA07924

The California Department of Forestry and Fire Protection (CAL FIRE) is seeking a contractor to provide potable water testing services at the Mount Bullion Conservation Camp located in Mariposa, California. This solicitation, identified as IFB 4CA07924, was posted on September 2, 2026, with a response deadline of September 15, 2026. The procurement is managed by the state of California under the SLED organization type. Interested parties may contact Susan Pasarow for further information regarding the submission process and requirements.

POSTED

about 20 hours ago

DEADLINE

PROVIDE LABORATORY SERVICES FOR INSPECTION OF MATERIALS AND EQUIPMENT FOR PUBLIC WORKS PROJECTS

Solicitation # JPP-SOQEvent#136

The Jefferson Parish Purchasing Department in Louisiana is seeking solicitations for laboratory services to inspect materials and equipment used in public works projects. This opportunity, identified by solicitation number JPP-SOQEvent#136, is open for responses until October 2, 2026, at 9:30 PM. The contract will be performed within the state of Louisiana. Interested parties should direct inquiries to the primary point of contact, Misty Camardelle, via the provided email or phone contact information.

Jefferson Parish Purchasing Department

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Leak Detection Services

Solicitation # pinellas-county-school-board-26-CD-036-2026

The Pinellas County School Board is seeking one or more Florida-certified leak detection contractors to provide comprehensive services on an as-needed basis for various District-owned facilities. The scope of work includes locating, documenting, and reporting leaks in domestic water, condenser water, chilled water, irrigation, sanitary, stormwater, gas, swimming pools, and underground utility systems. The selected contractor must provide all necessary labor, supervision, equipment, materials, and permits to ensure minimal disruption to school operations. To be eligible, prime contractors must be certified leak detection specialists in the state of Florida at the time of the bid opening. This solicitation, identified as pinellas-county-school-board-26-CD-036-2026, was posted on September 1, 2026, with a response deadline of September 29, 2026. Interested parties can coordinate through the Agency Admin via the provided contact information or the official vendor link.

Pinellas County School Board

POSTED

about 21 hours ago

DEADLINE

Invitation for Bids (IFB) Traceable Calibration of Mammography and X-ray Radiation Evaluation

Solicitation # HHS0017745v3

The Texas Health and Human Services Commission, through its Procurement and Contracting Services division, is soliciting competitive bids under IFB HHS0017745v3 to provide traceable calibration services for mammography and x-ray radiation evaluation equipment. This procurement is conducted on behalf of the Department of State Health Services and represents a rebid of the previous solicitation, HHS0017745v2. The solicitation was posted on September 1, 2026, with a response deadline of September 16, 2026, at 4:30 PM. The contract is designated for performance within the state of Texas, and interested parties may contact David Martinez for further information.

Department of State Health Services

POSTED

about 23 hours ago

DEADLINE

Chemical Nutrient Analysis Service

Solicitation # W911QY-26-R-CHEMICAL-NUTRIENT-ANALYSIS

The U.S. Army Contracting Command Aberdeen Proving Ground, supporting the Combat Feeding Division of the DEVCOM Soldier Center, is soliciting proposals for a single Firm Fixed Price contract to provide nutrient analysis services for food samples and ingredients. The requirement involves the analysis of an indeterminate quantity of samples, ranging from 25 to 100, with a total value up to 25,000 dollars over a 12-month period of performance. Key analytes of interest include selenium, vitamin B12, and total dietary fiber, though the contractor must be capable of analyzing other specified analytes as needed. Results must be delivered within 14 calendar days of sample receipt. To be eligible, contractors must maintain active ISO/IEC 17025 accreditation and possess the in-house capacity to perform testing, as pass-through arrangements are prohibited. All testing must utilize validated industry-standard methods, and the contractor is responsible for maintaining a documented chain of custody, adhering to specific storage conditions, and retaining samples for 30 days post-reporting. This is a full and open competition under NAICS code 541380. Proposals will be evaluated based on technical capability, price, and past performance, with the award granted to the offeror representing the best value to the government. Proposals must be submitted by 12:00 p.m. EST on September 15, 2026.

W6QK Acc-Apg Natick

POSTED

DEADLINE

REQUIREMENTS-26-3767 eDNA Sample Processing - Solicitation 1305M326Q0354 Amendment 01

Solicitation # 1305M326Q0354

The Department of Commerce NOAA is seeking a contractor to provide Environmental DNA sample processing and sequencing services under solicitation 1305M326Q0354. This specific notice serves as Amendment 01 to the original requirements. The project falls under NAICS code 541380 and is managed by the agency's office located in Seattle, Washington. Interested parties must submit their responses by the deadline of September 4, 2026. The primary point of contact for this procurement is Rachel Stone. Detailed specifications and submission guidelines are available within the full solicitation documentation.

Department Of Commerce Noaa

POSTED

DEADLINE

DNA Sequencing for the Physiology and Pathology of Tree Fruits Research

Solicitation # 1232SA26Q1430

The United States Department of Agriculture Agricultural Research Service is seeking quotations for DNA sequencing services to support the Physiology and Pathology of Tree Fruits Research Center under solicitation 1232SA26Q1430. While the agency intends to award this contract on a single source basis, this is an unrestricted acquisition open to all responsible sources. The work falls under NAICS code 541380 for Testing Laboratories and Services, and the place of performance is located in Wenatchee, Washington. Interested parties must submit their quotations by the deadline of September 18, 2026. This combined synopsis and solicitation follows FAR Part 12 guidelines for commercial items, and no separate written solicitation will be issued. The government maintains sole discretion in determining whether to compete the contract based on the responses received.

USDA Ars Afm Apd

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, PNEUMATIC TIRE

Solicitation # SPE7L7-26-T-5080

This contract is for the procurement of four pneumatic tire valves, identified by NSN 2640008572891 and part numbers VS-740-1-GOVT or 717-7. The valves must be size TR-717-02, feature an off-center position, and utilize a screw-in tube application method. A critical environmental requirement prohibits the use of Class I ozone depleting chemicals in the delivered items. The order is issued by the Defense Logistics Agency with a delivery requirement of 20 days after order. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5085

This contract is a solicitation by the Defense Logistics Agency for the procurement of one power supply unit, identified by NSN 6130-01-687-9026 and part number 1600902-1 from Thales Defense & Security Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 25, 2026. The item is to be delivered FOB Origin to the 0325 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0457

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0457 for the procurement of two units of a non-NSN item identified by part number 7310GM5022323. This federal requirement is tracked under purchase request 7018102192. The solicitation was posted on September 2, 2026, with a response deadline set for September 10, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5088

This contract is for the procurement of five wet charged lead acid storage batteries, specifically East Penn Manufacturing Co. part number 24M-5, under NSN 6140-01-457-2450. The items are classified as DOT Class Corrosive and must be shipped as batteries wet filled with acid. They carry a non-extendable shelf life of six months and must be delivered FOB destination within ten days. The supplier must comply with strict safety and quality standards, including the submission of Safety Data Sheets and hazardous communication labels per Federal Standard 313-E and OSHA requirements. Packaging must adhere to MIL-STD-2073-1E, MIL-STD-129, and UN requirements using 4G fiberboard boxes. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5089

This contract, identified as SPE7L7-26-T-5089, is a solicitation by the Defense Logistics Agency for the procurement of battery covers under NSN 6160014747458. The agreement consists of three separate line items, each for a quantity of one unit, with delivery required within five days. Shipments are destined for various locations, including Fort Riley, Kansas, Grand Prairie, Texas, and Parkersburg, West Virginia. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Terms specify FOB Origin with inspection and acceptance occurring at the destination, and a zero percent quantity variance is permitted.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5083

This contract is for the procurement of two power supply units, part number FH-64-A from Teledyne FLIR Defense, LLC, under solicitation number SPE7L7-26-T-5083. The items are identified by NSN 6130-01-619-5734 and are to be delivered FOB Origin to Fort Stewart, Georgia, within 20 days. The required delivery date is set for August 25, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Additionally, the contractor must comply with CMMC Level 2 self-assessment standards and other technical requirements listed in the DLA Master List.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5087

This contract is a solicitation from the Defense Logistics Agency for the procurement of two lead acid AGM storage batteries, specifically part number GPL-4DA from Concorde Battery Corporation. The items are identified by NSN 6140-01-596-7978 and are subject to a non-extendable shelf life of 18 months. Delivery is required within five days after receipt of order, with the destination being the U.S. Naval Air Facility Atsugi in Japan. The agreement mandates strict adherence to several military standards, including MIL-STD-129R and MIL-STD-130N for marking and identification, and MIL-STD-2073-1E for packaging. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies that mercury must not be intentionally added to the hardware, except for functional use within the batteries, and requires the provision of MSDS/PSDS documentation per FED-STD-313.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5086

This contract is for the procurement of 10 sealed 12V lead acid storage batteries, identified by NSN 6140014934217. The items are classified as commercial off the shelf and critical application items with a non-extendable shelf life of 12 months. Delivery is required within 20 days, with the destination being Al Udeid AB, Qatar. The supplier must adhere to strict quality and safety standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor is required to provide Safety Data Sheets and labels in accordance with OSHA and 29 C.F.R. 1910.1200. Additionally, the contract prohibits the intentional addition of mercury except where functionally required for the batteries.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHI

Solicitation # SPE7L7-26-T-4723

Solicitation SPE7L7-26-T-4723 is a Defense Logistics Agency procurement for pneumatic vehicle tires, specifically NSN 2610017311188, part number FS561A from Bridgestone Americas Tire Operations. The requirement consists of two line items totaling four units, with delivery required within 20 days of order. The items are to be delivered FOB Destination to locations in San Diego, California, and Williamsburg, Virginia. This is a restricted source item requiring engineering source approval by the government design control activity. A critical shelf-life requirement is in effect, mandating that tires must have at least 42 months of shelf-life remaining upon delivery. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-DTL-4 for non-aircraft tires, MIL-STD-2073-1E for preservation, and MIL-STD-129 for labeling and bar-coding. Shipments must be sent via the fastest traceable means, and the use of parcel post is explicitly prohibited. Environmental restrictions forbid the use of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with various FAR and DFARS clauses regarding small business representations, cybersecurity safeguarding of covered defense information, and hazardous material identification.

Tire Manufacturing (except Retreading)

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5084

This contract is for the procurement of lead acid, wet charged, maintenance free storage batteries under solicitation SPE7L7-26-T-5084. The requirements specify batteries furnished in accordance with SAE J537 and A-A-55439, featuring a minimum reserve capacity of 140 minutes. The contract includes four separate line items, each for a quantity of two units, with delivery required within five days. Delivery is FOB destination to various locations, including San Diego, California; Blackstone, Virginia; and Manchester Township, New Jersey. The items are classified as corrosive hazardous materials and must adhere to strict packaging, marking, and shipping standards, including MIL-STD-129 and MIL-STD-2073-1E. A critical requirement is the Type I shelf life of six months, which is non-extendable. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract prohibits the intentional addition of mercury except where functionally required for battery operation.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5082

This contract is for the procurement of four lithium-ion storage batteries, part number FH-78-A from Teledyne FLIR Defense, LLC, under NSN 6140016238689. The items are classified as Type I with a non-extendable shelf life of 60 months and require MSDS/PSDS documentation per FED-STD-313. Delivery is set for 20 days after order, with the destination and inspection point located at Fort Stewart, Georgia. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Regarding transportation, the lithium-ion packs are noted to be exempt from certain dangerous goods regulations under Special Provision 188 of ADR/RID and IMDG, and Special Provision A45 of IATA, provided they remain within specified lithium content limits.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5081

This contract is for the procurement of three storage batteries, part number FH-06-A by Teledyne FLIR Defense, LLC, under solicitation SPE7L7-26-T-5081. The items are identified by NSN 6140015591061 and must be delivered to Fort Stewart, Georgia, within 20 days. The contract specifies a non-extendable Type I shelf life of 36 months, requiring that items furnished have at least 85 percent of their shelf life remaining. Compliance requirements include adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates hazardous communication standards, prohibiting the intentional addition of mercury except where functionally required. Transportation of the lithium-ion packs is governed by Special Provision 188 of ADR/RID and IMDG, and Special Provision A45 of IATA-DGR, as they are excepted from certain dangerous goods regulations based on lithium content.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE