Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) and Quality Validation

Active

Federal

Response Deadline10/30/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Non-Destructive Testing (NDT) and Quality Validation supports prime contractors on DLA Aviation F-118 engine projects for the Department of Defense. The scope of work involves performing specialized testing and inspections, including pressure testing, leak testing, and dimensional inspection. These tasks are executed using advanced equipment such as CMM, X-ray, and ultrasonic tools to ensure rigorous quality standards. To qualify for this engagement, providers must hold NADCAP and AS9100 certifications. The primary deliverables include certified test reports and Inspection Method Sheets. This opportunity is categorized under NAICS code 541380 and is managed by DLA Aviation in Oklahoma City.

General Info

NDT and quality validation subcontract for DLA Aviation F-118 engine projects requiring certifications.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of FD20302700424.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Fd203062700424 (2995-01-290-1428J)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized testing and inspection for prime contractors on DLA Aviation F-118 engine projects. Conducts non-destructive testing (NDT), pressure testing, leak testing, and dimensional inspection using CMM, X-ray, and ultrasonic equipment. Requires NADCAP and AS9100 certifications. Delivers Inspection Method Sheets and certified test reports.

Similar Contracts

Same NAICS industry code

Ballistic Production Control Testing (PCT) ServicesThis subcontract opportunity is for Ballistic Production Control Testing (PCT) Services supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform ballistic testing for prime contractors on DLA and Army projects, specifically conducting Production Control Testing and Ballistic Coupon Testing. All work must be executed in accordance with ATPD 2352 utilizing precision impact analysis tools and high-velocity projectile firing equipment to deliver final Ballistic PCT Test Reports and Certifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the work and the requirement to handle classified drawings, the contractor must possess a facility clearance and meet CMMC Level 2 compliance standards. Interested parties must submit their responses by November 18, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet if confirmed. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone small businesses, under NAICS code 541380. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

in about 22 hours

Soil and Compaction TestingThis subcontract opportunity involves providing professional soil and compaction inspection and testing services for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will support prime contractors on facility projects, specifically focusing on road and parking upgrades. Key responsibilities include conducting field testing of soil compaction and inspecting sub-grade materials utilizing nuclear densitometers. All resulting soil and compaction test reports must be certified by a Professional Engineer. The solicitation was posted on October 20, 2026, with a response deadline of November 20, 2026. This project falls under NAICS code 541380 and is managed by the Ministry of Environment, Conservation and Parks.

Environment, Conservation and Parks

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Environmental Laboratory ServicesThis subcontract for Environmental Laboratory Services supports prime contractors working on projects for the Confederated Tribes of the Colville Reservation. The primary scope of work involves performing laboratory analysis on groundwater samples collected from the Nespelem Post and Pole site, which includes comprehensive data verification and validation processes. To ensure compliance, the service provider must maintain laboratory certification for all specific analytes required by the Quality Assurance Project Plan. The selected contractor is responsible for delivering all analytical reports and laboratory data in an electronic format. This opportunity is categorized under NAICS code 541380 and is centered in Nespelem, Washington. Interested parties should note the response deadline of November 5, 2026.

Confederated Tribes of the Colville Reservation

POSTED

about 6 hours ago

DEADLINE

SCBA System Installation and Air Quality Certification SpecialistThis subcontract opportunity is for an SCBA System Installation and Air Quality Certification Specialist to support prime contractors on fire department projects for the Wilcox County Board of Commissioners in Georgia. The selected specialist will be responsible for the physical installation of systems, performing comprehensive leak testing, and conducting system startups and operational demonstrations. A critical component of the scope involves using specialized equipment to perform air quality sampling to ensure compliance with Grade E breathing air standards. The final deliverables for this engagement include a fully leak-tested system and a formal Air Quality Certification report. Interested parties must respond by November 19, 2026.

Wilcox County Board of Commissioners

POSTED

about 7 hours ago

DEADLINE

Construction Materials Testing LaboratoryThis subcontract opportunity is for a Construction Materials Testing Laboratory to provide independent testing services for prime contractors working on City of Hollywood Public Utilities projects. The scope of work focuses on the compression testing of repair mortars and cement-based grouts in accordance with ASTM C109, as well as the testing of adhesive dowels. The selected provider will be responsible for delivering certified test reports verifying the strength of both grout and concrete. The solicitation is categorized under NAICS code 541380 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 25, 2026. This contract supports infrastructure quality assurance for public utility projects within the state of Florida.

Public Utilities

POSTED

about 9 hours ago

DEADLINE

in about 1 month

OGRA Approved LPG Cylinder Inspection ServicesThis subcontract opportunity with Pakistan State Oil Company Ltd involves providing third-party safety and compliance inspections for LPG cylinders used by prime contractors on PSO projects. The selected provider will be responsible for conducting technical inspections, quality assurance checks, and safety certifications utilizing pressure testing equipment and non-destructive testing methods to ensure all cylinders meet the standards set by the Oil and Gas Regulatory Authority. A mandatory requirement for this contract is that the service provider must be OGRA Approved. The scope of work includes the delivery of detailed inspection reports and official safety certifications. Interested parties must respond by October 26, 2026, to be considered for these specialized technical services.

Pakistan State Oil Company Ltd

POSTED

about 9 hours ago

DEADLINE

RFI Testing and Certification ServicesThis subcontract, titled RFI Testing and Certification Services, is issued by the Navsup Weapon Systems Support under the Department of Defense. The contractor is responsible for performing final testing and inspection of repaired Mounting Bases, specifically part number 822-1708-001, to ensure they meet Ready For Issue specifications for US Navy projects. Using specialized test and tooling equipment and following established repair and overhaul manuals, the contractor must validate serviceability and document all results to facilitate government acceptance. The primary deliverables for this engagement include the Final Test Report and the RFI Certification. This opportunity falls under NAICS code 541380 and was posted on October 20, 2026, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

Marine Non-Destructive Testing (NDT) ServicesThis subcontract for Marine Non-Destructive Testing (NDT) Services involves performing specialized inspections on underwater hull components for the US Navy USNS SACAGAWEA projects. The scope of work focuses on testing welded seams, butts, and critical hull stress points utilizing underwater-rated magnetic particle or ultrasonic equipment. The selected provider is responsible for delivering comprehensive technical test reports and data logs to the prime contractors. Managed by the Department of Defense through Mschq Norfolk under NAICS code 541380, the contract mandates strict qualification standards. Personnel must hold NDT Level II or III certification and possess SECNAV 5512/1 access to perform the required duties. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026.

POSTED

about 10 hours ago

DEADLINE

System Testing and RFI CertificationThis subcontract opportunity, titled System Testing and RFI Certification, involves providing final testing and inspection services for overhauled Distributing Systems supporting prime contractors on US Navy projects for the Navsup Weapon Systems Support agency. The selected provider will be responsible for conducting operational and reliability testing using Special Test Equipment to verify that all items function correctly within their intended operational environments and adhere strictly to Navy inspection standards. Key deliverables for this engagement include the submission of a Final Test Report and RFI Certification. The project falls under NAICS code 541380, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

UHV and High-Voltage Testing ServicesThis subcontract for UHV and High-Voltage Testing Services involves providing independent testing and quality assurance for prime contractors operating on Department of Energy projects at Brookhaven National Laboratory in Upton. The scope of work focuses on critical technical evaluations, including high-voltage breakdown testing, dimensional verification using CMM, and vacuum leak detection through helium leak testing. To ensure technical precision and compliance, all activities must adhere to BNL-specific quality assurance standards and ISO/IEC 17025 requirements. The selected provider is responsible for delivering comprehensive testing and quality assurance reports to document all findings and verifications.

Brookhaven National Labor -Doe Contractor

POSTED

about 10 hours ago

DEADLINE

in about 2 months

Specialized Testing & Inspection ServicesThis subcontract for Specialized Testing and Inspection Services, issued by Navsup Weapon Systems Support under the Department of Defense, involves the final testing and inspection of overhauled air pressure regulators for Department of the Navy aviation projects. The scope of work requires the execution of pressure testing, leak detection, and functional performance verification utilizing calibrated gauges, pressure chambers, and special test equipment to ensure strict adherence to military inspection standards and airworthiness certification. The selected provider will be responsible for delivering comprehensive test reports and RFI inspection certifications. This opportunity falls under NAICS code 541380 and was posted on October 20, 2026, with a response deadline of November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Aerospace Raw Material Supply (Specialty Alloys)This subcontract, titled Aerospace Raw Material Supply (Specialty Alloys), involves the procurement and delivery of certified raw materials for prime contractors working on DLA Aviation F-118 engine projects. The scope of work includes providing aerospace-grade alloy bars, forgings, or castings, all of which must be delivered to the manufacturer with full traceability and accompanying Material Test Reports. To ensure quality and compliance, the Department of Defense requires the supplier to maintain ISO 9001 certification and provide all necessary material certifications. This opportunity is managed by DLA Aviation in Oklahoma City under NAICS code 331210, with a response deadline set for October 30, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 10 hours ago

DEADLINE

Specialized Aerospace Finishing and Surface TreatmentThis subcontract for Specialized Aerospace Finishing and Surface Treatment involves performing Significant Industrial Processes for prime contractors supporting DLA Aviation F-118 engine projects. The scope of work requires the application of aerospace-grade heat treating, plating, anodizing, or chemical coatings to valve assembly parts utilizing industrial plating baths and heat-treatment furnaces to deliver fully treated components. Managed by the Department of Defense through DLA Aviation at Oklahoma City, the contract falls under NAICS code 332813. Qualified providers must hold SIP Certification, ISO 9001, or AS9100 certifications to ensure compliance with aerospace standards. The solicitation was posted on October 20, 2026, with a response deadline of October 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

Precision Machining for F-118 Valve Assembly ComponentsThis subcontract involves high-precision machining for F-118 engine valve assembly components supporting DLA Aviation. The scope of work requires the execution of CNC milling, turning, and grinding using aerospace-grade alloys to meet strict tolerances defined by technical data and Process Operation Sheets. To qualify, contractors must hold ISO 9001, AS9100, or NATO AQAP-2070 certifications. The project is managed under the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of October 30, 2026.

POSTED

about 10 hours ago

DEADLINE

PWB Inspection and Certification TestingThe PWB Inspection and Certification Testing subcontract involves providing independent inspection and testing services for prime contractors on Department of the Air Force projects. The primary objective is to ensure that printed wiring boards meet strict flight safety and performance specifications through functional testing and quality inspections. These activities are conducted against the Engineering Data List using precision electronic testing equipment to maintain compliance with KC-46 platform Qualification Requirements. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the delivery of certified test reports and inspection stamps. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 20, 2026.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Aviation-Grade Electronic Component SupplyThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, focuses on the procurement and supply of raw materials and specialized electronic components. The primary objective is to support prime contractors on Department of the Air Force projects specifically for the manufacture of PWB 285T0458-203. The scope of work includes sourcing long-lead time components and actively managing Diminishing Manufacturing Sources and Material Shortages to ensure production continuity. To maintain strict quality standards, the provider must supply certificates of conformance for all aviation-grade materials and is responsible for delivering completed component kits directly to the fabricator. This effort falls under NAICS code 423610, with a response deadline set for November 20, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Printed Wiring Board Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Printed Wiring Boards, specifically part number 285T0458-203, for Department of the Air Force projects managed by the Ok DLA Aviation At Oklahoma City. The selected contractor is responsible for the new manufacture, procurement, and integration of all component parts in strict accordance with the Engineering Data List. To ensure quality and compliance, the contractor must adhere to MQR-PSD-1 standards and possess the capability to support a Source Approval Request package. The project is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Fd203062700424 (2995-01-290-1428J)

Solicitation # FD20302700424

The 421st Supply Chain Management Squadron at Tinker Air Force Base is conducting market research via a Sources Sought Synopsis to identify potential manufacturing sources for a Valve Assembly for the F-118 engine, identified by NSN 2995-01-290-1428JU. This effort is intended to determine if the requirement can be competitive or a Small Business Set-Aside under NAICS code 336412. The government is seeking interested parties capable of providing all labor, materials, facilities, and equipment necessary for the manufacture, testing, preservation, packaging, and delivery of completely serviceable units, including the management of supply chains, long-lead parts procurement, and obsolescence issues. To be considered, potential sources must submit a Source Approval Request (SAR) package and a Company Profile to the Oklahoma City Small Business Office. Qualification requires that the company has manufactured the subject or a similar item within the past 36 months for the Department of Defense or the Original Equipment Manufacturer. Essential requirements include a valid Quality Assurance Certificate such as ISO 9001, AS9100, or NATO AQAP-2070, and the ability to provide detailed Process Operation Sheets and Inspection Method Sheets. Interested businesses of all sizes and socioeconomic categories are encouraged to respond with their company details, CAGE code, and documentation of their capabilities. This notice is for planning purposes only; no solicitation is currently available, and no funds have been allocated at this time.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

PRINTED WIRING BOARD_End_Item_KC-46_NSN_5998016525319KT _PN_285T0458-203

Solicitation # FD20302700261

The Department of the Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis to identify potential sources for the procurement of Printed Wiring Boards for the KC-46 platform. The specific requirement involves the new manufacture of three units of part number 285T0458-203, identified by NSN 5998-01-652-5319KT. This effort is not a formal solicitation or request for proposal, and no funds are currently available for the information solicited. The government is utilizing this process to determine the best acquisition strategy and to evaluate if the requirement can be competitive or established as a Small Business Set-Aside. Qualified sources must be capable of providing all labor, materials, and equipment necessary for the manufacture, inspection, testing, packaging, and shipping of the boards. Potential contractors may also be responsible for supply chain management, logistics planning, and nonrecurring engineering costs. Interested parties must provide comprehensive business information, including their CAGE code, UEI, and socioeconomic status under NAICS code 336413. Additionally, any source wishing to be qualified is required to complete a Source Approval Request package and submit it electronically via DoD SAFE. Performance will take place at Tinker AFB, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Igniter, Spark Gas T (3D)

Solicitation # SPRTA127R0103

Solicitation SPRTA127R0103 is a request for proposal issued by the Defense Logistics Agency Weapons Support for the procurement of 159 Gas Turbine Spark Igniters (NSN 2925015034385RV, Part Number 9045600-1) for TF33 engines. These steel components are designated as Critical Safety Items and are used to provide high voltage, high energy pulses to ignite fuel in the combustion section of the engine. The government is seeking firm unit prices for a quantity range between 40 and 239 units, with delivery expected to begin as early as July 31, 2028, at a rate of 10 units per month. The procurement is intended as a limited source action under FAR 6.302, identifying Unison Industries, LLC as a qualified source. The contract mandates strict adherence to quality and safety standards, requiring ISO 9001:2000 certification and Higher Level Contract Quality Requirements. Deliverables must comply with MIL-STD-2073-1 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification (IUID). Additionally, all wood packaging materials must be heat-treated and certified per ISPM 15 and ALSC standards. Inspection and acceptance will occur at the point of origin, with shipping terms set as FOB Origin. Proposals are due by November 20, 2026, and will be evaluated based on a combination of price and past performance.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

TEMPERATURE INDICATOR

Solicitation # SPRTA1-27-R-0081

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Freight and Transportation Services (OCONUS/Export)This subcontract for Specialized Freight and Transportation Services supports the Department of Defense through the Ok DLA Aviation At Oklahoma City. The scope of work involves the transportation, marking, and shipping of aerospace components for prime contractors on DLA Weapons Support projects. Key operational requirements include managing shipments via PIEE and coordinating with DCMA for Foreign Military Sales, OCONUS, Export movements, and FOB Origin logistics. The contractor is responsible for ensuring all freight classification and marking adhere to FAR 52.247-29 and FAR 52.247-53 standards. All components must be delivered with complete DOD shipping documentation. This opportunity falls under NAICS code 488510, with a response deadline set for November 18, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Concentrator Oxygen (P/N: 3478W000-001)This subcontract involves the supply of 12 specialized Oxygen Concentrator units, part number 3478W000-001, for prime contractors working on DLA Weapons Support projects. The units must be manufactured or sourced in strict accordance with aerospace specifications and NSN 1660-99-133-7851FW standards. Consequently, the provider is required to hold the necessary aerospace-grade manufacturing certifications to ensure compliance with these technical requirements. The project is managed under the Department of Defense through the Ok DLA Aviation agency in Oklahoma City, falling under NAICS code 336413. The solicitation was posted on October 19, 2026, with a response deadline set for November 18, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS