Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) for Special Emphasis Fasteners

Active

Federal

Response Deadline10/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing Non-Destructive Testing for special emphasis fasteners to support prime contractors on projects for the Department of Defense agency, Navsup Weapon Systems Support Mechanicsburg. The scope of work focuses on critical safety inspections, specifically requiring liquid penetrant inspection according to T9074 AS-GIB-010/271 and MIL-DTL-1222, as well as ultrasonic inspection following MIL-STD-2132 and QQ-N-286 standards. To qualify, the provider must maintain ISO/IEC 17025 accreditation and adhere to ISO 10012/ANSI/NCSL Z5403 calibration standards. The primary deliverables for this engagement are certified inspection reports and comprehensive certification data. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 30, 2026.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFA72.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD,CONTINUOUS THR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs critical safety inspections for prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. Conducts liquid penetrant inspection per T9074 AS-GIB-010/271 and MIL-DTL-1222, and ultrasonic inspection per MIL-STD-2132 and QQ-N-286. Requires ISO/IEC 17025 accreditation and ISO 10012/ANSI/NCSL Z5403 calibration standards. Delivers certified inspection reports and certification data.

Similar Contracts

Same NAICS industry code

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Third-Party Testing and Certification for Critical Application SeatsThis subcontract involves providing independent testing and validation services for critical application seats supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the performance of First Article Testing and production lot sampling in strict accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure rigorous safety compliance, the contractor must utilize stress analysis and load testing rigs, ultimately delivering certified inspection certificates and detailed test reports. The opportunity is categorized under NAICS code 541380 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. This effort focuses on ensuring that critical components meet all necessary safety and performance specifications through third-party certification.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities, under NAICS code 541380. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 7 hours ago

DEADLINE

SCDOT Certified Level 1 InspectionThis subcontract opportunity is for the provision of independent third-party quality assurance and inspection services for prime contractors working on Beaufort County Engineering road projects. The selected provider will be responsible for monitoring asphalt placement, verifying temperatures, and managing load tickets in strict accordance with SCDOT procedures. To ensure compliance and technical accuracy, the contractor must employ an SCDOT Certified Level 1 Inspector who will deliver weekly inspection reports and certified quality documentation. The solicitation was posted on October 16, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 541380, this project is managed by the Engineering department of South Carolina. Interested parties can find further details and submission guidelines through the official procurement portal.

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Geotechnical Vibration MonitoringThis subcontract for Geotechnical Vibration Monitoring involves providing specialized monitoring services for prime contractors working on roadway projects within the City of New Smyrna Beach. The primary objective is to monitor existing structures during the construction process to maintain stability and ensure strict compliance with established geotechnical standards. The selected provider will be responsible for delivering detailed vibration monitoring reports to document these findings. The opportunity is categorized under NAICS code 541380 and is managed by the Purchasing agency for the state of Florida. Interested parties should note that the solicitation was posted on October 16, 2026, with a response deadline set for January 13, 2027.

POSTED

about 12 hours ago

DEADLINE

Acceptance Testing and Certification for Electric StartersThis subcontract involves providing final acceptance testing and quality certification for electric engine starters supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for conducting functional testing using Special Test Equipment in accordance with approved overhaul manuals to verify operational reliability and generate necessary acceptance test data. The project requires the use of certified quality assurance personnel and strict adherence to calibration standards. Key deliverables include the submission of certified Acceptance Test Reports and RFI certifications. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Sensor & Hardware Testing (Lab and Field)This subcontract involves providing comprehensive laboratory and field testing for weather sensors and data acquisition hardware in support of prime contractors for the NASA Shared Services Center. The scope of work includes executing tests for sensors and peripherals, supporting the verification and validation of integrated hardware and firmware, and providing fabrication support that meets specific quality certifications. The project is based in Orlando, Florida, and requires the delivery of detailed test reports and formal verification and validation certification documentation. Interested parties should note the solicitation timeline, with a response deadline set for October 20, 2026.

NASA Shared Services Center

POSTED

about 12 hours ago

DEADLINE

Avionics Testing and Quality Assurance ServicesThe Avionics Testing and Quality Assurance Services subcontract involves providing independent inspection, environmental testing, and qualification testing for prime contractors supporting Department of the Air Force KC-46 aircraft projects. The scope of work includes conducting functional testing, environmental stress screening, and vibration and thermal testing utilizing spectrum analyzers and environmental chambers. To ensure compliance, the provider must maintain accreditation according to MQR-PSD-1 guidelines and Source Approval Request standards. The final deliverables for this engagement consist of comprehensive test reports and necessary certification documentation. This opportunity is managed through the Department of Defense via the Ok DLA Aviation office in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

about 12 hours ago

DEADLINE

Concrete Scanning and Non-Destructive Testing ServicesThis subcontract opportunity is for Concrete Scanning and Non-Destructive Testing Services to support prime contractors on Department of Veterans Affairs facility projects. The selected provider will perform non-destructive evaluations of concrete roof decks, utilizing systematic hammer testing to detect hollow or delaminated areas. Additionally, the contractor will use Ground Penetrating Radar and electromagnetic cover meters to map reinforcement spacing and depth, delivering comprehensive scanning data and delamination reports. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541380 and is managed by the Department of Veterans Affairs Network Contract Office 15. Qualified candidates must hold ASNT NDT Certification to perform the required technical services. The response deadline for this opportunity is October 28, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 12 hours ago

DEADLINE

Ballistic Certification and Product Compliance Testing (PCT)This small business set-aside subcontract for DLA Weapons Support involves providing independent laboratory testing and certification services for prime contractors. The scope of work focuses on executing Contractor First Article Testing and both ballistic and non-ballistic Product Compliance Testing. These operations utilize specialized ballistic ranges and material analysis equipment to ensure all materials are validated against NIST and EJCP requirements. The selected provider is responsible for delivering comprehensive certified test reports and CFAT validation documentation. This effort falls under NAICS code 541380 and is managed by the Department of Defense. The solicitation period extends from October 2026 through October 2027.

DLA Weapons Support

POSTED

about 12 hours ago

DEADLINE

in about 1 year

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 12 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Certified Raw Material SupplyThis subcontract, titled Certified Raw Material Supply, involves the procurement of high-grade alloys and specialized metals to support prime contractors working on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work requires that all materials strictly adhere to TDP Version 004 specifications, particularly for Critical Safety Items. To ensure quality and compliance, the supplier must provide comprehensive mill certifications and full traceability documentation from approved sources. All raw materials delivered under this agreement must be accompanied by certified mill test reports. The opportunity was posted on October 16, 2026, with a response deadline of November 13, 2026, falling under NAICS code 423510.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Stuffing Box Plug FabricationThis subcontract involves the fabrication of Stuffing Box Plugs for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The scope of work requires the performance of detailed chemical and mechanical material analyses using laboratory equipment to ensure full compliance with TDP Version 004. The contractor is responsible for maintaining rigorous material traceability and providing certified laboratory results for all material properties. Final deliverables include the fabricated plugs accompanied by comprehensive material certification reports. The opportunity is categorized under NAICS code 335999, with a response deadline of November 13, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Periscope Subassembly Fabrication and IntegrationThis subcontract for Periscope Subassembly Fabrication and Integration supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the final machining, assembly, and integration of periscope subassemblies for prime contractors, strictly adhering to TDP Version 004. Key technical requirements include precision machining of sub-components and the execution of hydrostatic pressure testing using specialized rigs within controlled environments. The contractor is responsible for delivering five fully assembled and tested periscope subassemblies and providing a Certificate of Compliance via WAWF. This project falls under NAICS code 336413, with a response deadline set for November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The selected provider will be responsible for the final preservation, packaging, and marking of units to ensure they are fully prepared for shipment. Key technical requirements include the application of physical identification markings according to MIL-STD-130, REV N, and the execution of preservation and packing procedures per MIL-STD 2073. The scope of work involves the use of industrial marking equipment, MIL-SPEC crates, and vacuum sealing techniques. To qualify, the contractor must hold certification in MIL-STD packaging standards. This opportunity falls under NAICS code 488410, with a response deadline set for November 13, 2026.

Motor Vehicle Towing

POSTED

about 12 hours ago

DEADLINE

Precision Machined Components for Compressor UnitThis subcontract involves the precision machining and fabrication of internal components for compressor units supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes the production of metal housings, valves, and pistons utilizing CNC machining and precision grinding of aerospace-grade alloys in strict accordance with the Technical Data Package. The selected provider must maintain ISO 9001 or AS9100 quality management systems and provide comprehensive quality assurance records for all integrated assemblies. The final deliverables consist of machined components and sub-assemblies, with a response deadline set for November 13, 2026.

POSTED

about 12 hours ago

DEADLINE

Manufacture and Supply of Compressor Unit, REC (NIIN 015479404)This subcontract involves the manufacture and supply of three finished REC Compressor Units for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is required to produce the units in strict accordance with Technical Data Package Version 006 and Cage Codes 1SGJ6 and 5R450. Compliance with MIL-STD-130, REV N for physical identification and MIL-STD 2073 for packaging is mandatory. To be eligible, the provider must maintain status as an Authorized Distributor of the original manufacturer and ensure full compliance with DFARS Part 225. The project falls under NAICS code 333914 and is managed under the Department of Defense. Responses for this requirement are due by November 13, 2026.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

K-MONEL Alloy Bar Stock SupplyThis subcontract involves the supply of certified K-MONEL alloy bar stock to prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg projects under the Department of Defense. The raw materials must strictly adhere to QQ-N-286 specifications and include comprehensive quantitative chemical and mechanical analyses. To ensure quality and regulatory compliance, the provider must deliver mill certifications, heat and lot traceability documentation, and detailed mill test reports. The agreement mandates full compliance with the Buy American Act and applicable Free Trade Agreements. Operating under NAICS code 423510, the contract requires the delivery of certified raw materials that meet all specified government standards. Interested parties should note the response deadline of October 30, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

K-MONEL Continuous Thread Stud FabricationThis subcontract involves the fabrication of 50 continuous thread studs for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the machining and forming of studs using K-MONEL material, with specific requirements for solution annealing and age hardening in accordance with QQ-N-286. The contractor is responsible for delivering the finished studs along with additional fasteners designated for destructive testing. Strict adherence to quality and documentation standards is required, including the maintenance of comprehensive heat and lot traceability. To qualify, the provider must maintain an ISO-9001 or MIL-I-45208 quality system. This project falls under NAICS code 332722 and is associated with the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS