This Solicitation opportunity from Department Of Defense was posted on September 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NONMETALLIC CHANNEL

Closed

SPE8E5-26-T-4389Federal

Submission Closed09/28/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 327999

New

DIBBS

Dial Window Manufacturing and SupplyThis subcontract involves the manufacture and supply of 13 dial windows, specifically NSN 5355-00-392087-1, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor must produce these units according to technical data provided via the DLA portal, ensuring all materials are of domestic origin. Quality control and logistics are strictly governed by military standards, requiring sampling plans per MIL-STD-1916 or ASQ H1331 Table 1 and packaging in accordance with MIL-STD-2073-1E. The final delivery of the packaged and marked units is to be made to the government destination at Hill AFB.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Nonmetallic Bulk Hose SupplierThis subcontract opportunity is for the supply of 852 feet of nonmetallic bulk length hose to support prime contractors on projects for the DLA Weapons Support Fluid Handling Division. The selected supplier must manufacture or source materials that are compatible with Eaton Aeroquip LLC and Parker-Hannifin Corporation standards, adhering strictly to the DLA Master List of Technical and Quality Requirements RA001. All materials must be packaged and marked in accordance with MIL-STD-129 and ASTM D3951 standards for delivery to Tinker AFB. The procurement is designated as a Total Small Business Set-Aside under NAICS code 327999. Interested parties must submit their responses by November 16, 2026, to be considered for this Department of Defense requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly Supply (P/N CAU23544)This subcontract involves the supply of two nonmetallic hose assemblies, part number CAU23544, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The components must adhere to Government design control activity requirements and be sourced from or approved by designated engineering entities, specifically Parker-Hannifin Corp, AMZ Alabama Inc., or BAE Systems Tactical Vehicle Systems LP. Eligible providers must maintain active SAM validation along with a valid CAGE and UEI. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, under NAICS code 327999 for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplyThis subcontract, issued by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the supply of 101 nonmetallic hose assemblies. The contractor is responsible for manufacturing or sourcing part number T00074-5083, identified as a Critical Application Item, ensuring all materials meet strict critical application specifications. All delivered units must be marked and labeled in accordance with MIL-STD 129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 327999, with the place of performance located in Tracy, California. Interested parties must respond by November 16, 2026, to support prime contractors delivering these essential components to the Defense Logistics Agency.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4297

Solicitation SPE7L1-27-T-4297 is a fixed-price, small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for 107 units of a knob, identified by NSN 5355-01-191-0559. The items must be manufactured in accordance with the current revision of the applicable military or consensus non-government part standard. Delivery is required within 168 days after order, with the destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract is issued under the First Destination Transportation program with FOB Origin terms. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with specific AQL levels for critical, major, and minor attributes. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and Hazard Communication Standards for hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3915

Solicitation SPE7L1-27-T-3915 is a small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for the acquisition of 73 knobs, identified by NSN 5355-01-171-0669 and part number MS91528-104G3. The items must be manufactured in accordance with the current revision of the applicable part standards, specifically NASM91528 and NASM3926. Delivery is required within 168 days after order, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted via the DIBBS portal and cannot include items produced using additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3976

Solicitation SPE7L1-27-T-3976 is a small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for the acquisition of 51 units of a knob, identified by NSN 5355014458055. The contract is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The original required delivery date is February 8, 2027, with a need ship date of May 4, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Key regulatory requirements include compliance with the Buy American Act, safeguarding covered defense information per DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment and invoicing must be processed electronically through the Wide Area Workflow system. All quotes are to be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2728

Solicitation SPE4A5-27-T-2728, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of 13 dial windows (NSN 5355003920871). The contract specifies a delivery timeline of 447 days after order, with a required delivery and ship date of February 4, 2028. Shipping is FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution Depot Hill at Hill AFB, UT. The procurement is categorized under NAICS code 327999 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Technical and quality standards are stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with a specific requirement to avoid plastics in wrapping and dunnage where possible. While Item Unique Identification is not required, bare item marking is mandatory. The contract includes various FAR and DFARS clauses covering destination inspection, cybersecurity reporting, the Buy American Act, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Invoicing and payment must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2753

Solicitation SPE4A5-27-T-2753, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of eight metal strips (NSN 5620015320892). The required delivery date is January 7, 2028, with a delivery timeline of 419 days ADO. The contract specifies FOB Origin terms, with the destination for inspection and acceptance located at the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is categorized under NAICS code 327999 and requires the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment processing. Technical compliance is governed by several military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling. Item Unique Identification is not required. The contract incorporates critical regulatory clauses, including DFARS 252.225-7001 for the Buy American and Balance of Payments Program, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and offerors must validate their current status in the System for Award Management (SAM).

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0433

Solicitation SPE8E5-27-T-0433 is a request for the procurement of 1,465 feet of nonmetallic special shaped sections, identified by NSN 9390-00-900-3214. The material must adhere to A-A-59588, Class 3A, Grade 60, with dimensions specified in drawing 110-042 and a minimum required length of 10 feet. The contract includes a First Article Test requirement and specifies that inspection and acceptance will occur at the point of origin. Delivery is required within 159 days, with a need ship date of July 24, 2026, and a final required delivery date of December 31, 2026, shipping FOB Origin to DLA Distribution Cherry Point, North Carolina. The procurement is subject to strict technical and quality standards, including DLA Master List requirements and quality conformance inspection RQ006. Packaging must comply with MIL-STD-129 and RP001, with non-hazardous materials packaged per ASTM D3951 and hazardous materials per TQ requirement IP025 and FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 self-assessment and DFARS safeguarding of covered defense information. The award may be automated, and a price evaluation preference is available for certified HUBZone small business concerns.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

SHEET, NONMETALLIC, PROT

Solicitation # SPE8E5-27-T-0436

Solicitation SPE8E5-27-T-0436 is a fixed-price, small business set-aside procurement issued by the Defense Logistics Agency Troop Support for one nonmetallic protective sheet, specifically a special shaped section protective seal under NSN 9390-01-595-7239. The requirement specifies a delivery timeline of 20 days with a required delivery date of November 3, 2026, delivered FOB Origin to a destination in Westfield, Massachusetts. The item is classified as a Type I item with a non-extendable shelf life of 18 months. Inspection and acceptance are both designated as destination-based, governed by FAR 52.246-1. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for MRAP palletized shipments, including the use of high-visibility fluorescent yellow stickers or OEM-specific colored placards. The contract incorporates several critical regulatory clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and hazardous material labeling per 29 CFR 1910.1200. Administrative processing and vendor payments are to be managed electronically through the Wide Area Workflow system.

Defense Logistics Agency

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the supply of six nonmetallic hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing assemblies that match NSN 4720-01-158-620, ensuring strict adherence to the technical specifications and data provided through the DLA portal. Logistics for the contract are managed via the First Destination Transportation program, with the place of performance located in Cherry Point. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 327999.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

Solicitation SPE8E5-26-T-4389 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 98 units of nonmetallic channels, each 60.0 inches in length. Identified as a critical application commercial item under NSN 9390-00-263-0061, the product must adhere to technical data package Revision A and basic specification MS27833. The item is subject to a non-extendable shelf life of 36 months and requires specific identification marking per MIL-STD-130N and MIL-STD-129R(3). The contract mandates strict quality and sampling protocols, utilizing MIL-STD-1916 or ASQ H1331 with a zero-based sampling plan. Inspection and acceptance are both conducted at the origin. Packaging must comply with MIL-STD-2073-1E and RP001, with a specific prohibition against the use of additive manufacturing processes for production. Hazardous materials must be labeled and documented with Safety Data Sheets according to 29 CFR 1910.1200 and Federal Standard No. 313-E. Delivery is required to DLA Distribution Warner Robins, Georgia, with a need ship date of January 22, 2026, and an original required delivery date of April 5, 2027. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and a price evaluation preference for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

General Info

DLA seeks 98 nonmetallic channels for delivery to Warner Robins by April 2027.

Agency

Department Of Defense → WARNER ROBINS

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 16

Solicitation

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → WARNER ROBINS

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → WARNER ROBINS

Office AddressUSA

Contacts

Nafis Beyah

contact@example.gov

+1 (555) 000-0000

Full Description

NONMETALLIC CHANNEL
NONMETALLIC CHANNEL CRITICAL ITEM
UI = LG = 60.0 INCHES IN LENGTH
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). Hazard Communication Standard Notice:
SPE8E5-26-T-4389
SECTION B
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS27833 NOT 4 REVISION NR DTD 10/01/2024 PART PIECE NUMBER: MS27833-8-600
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E5-26-T-4389
SECTION B
PR: 7018364603 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018364603 0001 LG 98.000
NSN/MATERIAL:9390002630061
DELIVERY (IN DAYS):0076
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:10 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ITEM SHALL BE PACKAGED IN A MANNER TO PREVENT DISTORTION DURING SHIPPING AND STORAGE. WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
SPE8E5-26-T-4389
SECTION B
PR: 7018364603 PRLI: 0001 CONT’D
Need Ship Date:01/22/2026 Original Required Delivery Date:04/05/2027
SPE8E5-26-T-4389 NSN/Part Number: 9390-00-263-0061 Quantity: 98 LG Purchase Request: 7018364603QTY: 98 Delivery: 76 days ADO