NONMETALLIC CHANNEL

NONMETALLIC CHANNEL
NONMETALLIC CHANNEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
1 LG = 8 FT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ITEM IS A NON-STANDARD ITEM THAT SHOULD BE CUSTOM ORDERED IN ACCORDANCE
WITH MIL-PRF-6855/5 TO THE FOLLOWING SPECIFICATIONS: STYLE A, CLASS 2,
TYPE A, GRADE 60 EXTRUDED SHAPE WITH THE FOLLOWING DIMENSIONS: 0.750
INCHES WIDE (DIMENSION B), 0.188 INCHES THICK (DIMENSION C), 0.313
INCHES TALL (DIMENSION A), 0.125 INCHES ON THE SIDE (DIMENSION D), 0.125
INCHES THICK ON THE SIDE 2(DIMENSIONS E AND F), AND 72 TO 96 INCHES
LONG.
MIL-R-6855/5, STYLE A, CLASS 2 (NEOPRENE/POLYCHLOROPRENE) TYPE
A, GRADE 60 EXTRUDED SHAPE WITH THE FOLLOWING DIMENSIONS: 0.750
INCHES WIDE (DIMENSION B), 0.188 INCHES THICK (DIMENSION C), 0.313
INCHES TALL (DIMENSION A), 0.125 INCHES ON THE SIDE (DIMENSION D), 0.125
INCHES THICK ON THE SIDE 2(DIMENSIONS E AND F), AND 72 TO 96 INCHES
LONG. NEOPRENE/POLYCHLOROPRENE IS THE ONLY ACCEPTABLE ELASTOMER. A
ELASTOMER BLEND IS NOT ACCEPTABLE. THE MATERIAL MARKINGS HAVE TO BE IN
ACCORDANCE WITH PARAGRAPH 3.9 OF MIL-R-6855. THE TECHNICAL
CHARACTERISTICS FOR THE SUBJECT NSN SHALL BE UPDATED TO REFLECT A
MINIMUM LENGTH OF 6 FEET AND A MAXIMUM LENGTH OF 8 FEET.
DIMENSIONS ARE SUBJECT TO THE TOLERANCES SPECIFIED IN MIL-R-6855/5 WHILE
MEETING THE MANDATORY MINIMUM INSIDE WIDTH. SPECIAL
SIZE DIMENSIONS:
INSIDE CHANNEL WIDTH: .517 IN. MIN. (MANDATORY)
DIM. "A": 0.313 INCH
DIM. "B": 0.750 INCH
DIM. "C": 0.188 INCH
DIM. "D": 0.125 INCH
DIM. "E" & "F": 0.125 INCH
SPE8E9-27-T-0164
SECTION B
UNIT OF ISSUE = LG (EQUALS ONE CONTINUOUS 72 TO 96 INCH LENGTH)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FAR 52.246-11, HIGHER LEVEL CONTRACT QUALITY
REQUIREMENTS, APPLIES/ISO 9001/ANSI/ASQC
Q 9001 APPLIES.
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-6855/5A NOT 2 REVISION NR A DTD 08/01/2022 PART PIECE NUMBER: 3/4X3/16X5/16X1/8X1/8X72 TO 96
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-6855F(1) NOT 2 REVISION NR F DTD 08/01/2022 PART PIECE NUMBER: 3/4X3/16X5/16X1/8X1/8X72 TO 96
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018729209 0001 LG 2,097.000
NSN/MATERIAL:9390008726393
DELIVERY (IN DAYS):0122
DELIVER FOB: ORIGIN
SPE8E9-27-T-0164
SECTION B
PR: 7018729209 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/26/2027 Original Required Delivery Date:04/20/2027
SPE8E9-27-T-0164 NSN/Part Number: 9390-00-872-6393 Quantity: 2,097 LG Purchase Request: 7018729209QTY: 2097 Delivery: 122 days ADO