Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nonmetallic Grommet Manufacturing and Supply

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 181 nonmetallic grommets for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The items must be produced in accordance with Basic Spec NR MS35489K and Part Piece Number MS35489-21, with quality assurance conducted via MIL-STD-1916 or ASQ H1331 sampling. Logistical requirements specify that shipments must be marked per MIL-STD-129 and packaged in waterproof, greaseproof, opaque bags following MIL-DTL-117 standards. The place of performance for this contract is located in Jacksonville, Florida, under NAICS code 332322.

General Info

Manufacture and supply 181 nonmetallic grommets for DLA in Jacksonville, Florida.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332322 - Sheet Metal Work Manufacturing

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8842.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GROMMET, NONMETALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies nonmetallic grommets for prime contractors on Defense Logistics Agency (DLA) supply contracts. Manufactures items per BASIC SPEC NR MS35489K and PART PIECE NUMBER MS35489-21. Performs quality assurance via MIL-STD-1916 or ASQ H1331 sampling. Packages items in waterproof, greaseproof, opaque bags per MIL-DTL-117 and marks shipments per MIL-STD-129. Delivers 181 nonmetallic grommets.

Similar Contracts

Same NAICS industry code

seeking Small Businesses to supply products and services in support of our USAF Noise Suppressor Sustainment Contract

Solicitation # seeking-small-businesses-supply-products-services-support-our-usaf-noise-suppressor-sustainment

Vital Link Inc. is seeking small businesses across all socioeconomic categories to serve as subcontractors for the USAF Noise Suppressor Sustainment Contract. The scope of work involves providing a wide array of products and services necessary for the sustainment of noise suppressors and related equipment. Required supplies include raw materials such as stainless and carbon steel, hardware like nuts, bolts, and bearings, and specialized items including insulation, sealants, and electrical components such as PLCs, motors, and gearboxes. Additionally, the company is looking for fabricated items like machined parts and exterior sheeting, as well as onsite services including poured concrete work, painting, and structural steel assembly for fuel pit canopies. The solicitation targets various NAICS codes, including 332322, 335999, 238320, 325520, 332722, and 332999. For freight, crating, and packaging services, businesses are considered small if they have fewer than 500 employees. Interested parties should contact Ashley Barry or Ashley Aguilar, the Small Business Plan Administrator, to provide more information. The response deadline for this opportunity is December 31, 2026.

Vital Link Inc.

POSTED

about 5 hours ago

DEADLINE

in about 2 months

Storage Building Door Supply

Department Of Corrections, Engineering

POSTED

about 6 hours ago

DEADLINE

Supply of Access Covers (NSN 5340011066148)This subcontract involves the procurement of 119 access covers, identified by NSN 5340011066148, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for manufacturing or sourcing these parts according to technical data available via the DLA portal, ensuring strict adherence to Master Requirement RP001 for packaging and RQ011 for quality control. Delivery is specified as FOB Destination Other, with performance taking place in New Cumberland. The agreement requires full compliance with the Buy American Act and mandates the prohibition of covered defense telecommunications equipment. Operating under NAICS code 332322, the contract was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Supply of Ventilation Duct Terminals (P/N 1D23418H01)This subcontract involves the procurement and delivery of 14 ventilation duct terminals, specifically Northrop Grumman part number 1D23418H01, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The contractor must ensure full compliance with the Buy American Act and DLA Master List requirements RA001, RQ017, and RQ011. Additionally, the agreement mandates strict adherence to DFARS 252.225-7048 export controls and NIST SP 800-171 cybersecurity standards to ensure the security and legality of the hardware delivery.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Supply of Access Covers (NSN 5340013270798)This subcontract involves the manufacture or sourcing of 19 access covers under NSN 5340013270798 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is strictly prohibited from using additive manufacturing without prior authorization. All units must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Compliance requirements include packaging according to MIL-STD-2073-1E and RP001, and marking in accordance with MIL-STD-129. Additionally, the provider must supply hazard warning labels and Material Safety Data Sheets as required by 29 CFR 1910.1200 where applicable. The opportunity is categorized under NAICS code 332322.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Supply of Butt Hinges (NSN 5340-00-621122-9)This subcontract involves the supply of 29 butt hinges matching NSN 5340006211229 for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The contractor is responsible for manufacturing or sourcing the hinges and ensuring delivery FOB Origin to Robins Air Force Base. Strict adherence to military standards is required, including packaging per MIL-STD-2073-1E, property marking per MIL-STD-130N, and quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the provider must comply with the Buy American Act as specified in DFARS 252.225-7001.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Fabrication of Accessories Stowage BoxesThis subcontract involves the fabrication and assembly of accessories stowage boxes for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work requires the manufacture of ten completed boxes based on five specific technical drawings, utilizing CNC bending, welding, and cutting processes. All deliverables must be accompanied by a Certificate of Conformance and be produced at the performance location in Texarkana. To qualify, the contractor must maintain strict quality and security standards, including SAE AS9003 or ISO 9001 certification, participation in the US/Canada Joint Certification Program, and compliance with NIST SP 800-171. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332322 for the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

ELBOW, FLANGE TO TUBE

Solicitation # SPE7M4-27-T-2502

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

TERMINAL, VENTILATION D

Solicitation # SPE4A6-27-T-8702

Solicitation SPE4A6-27-T-8702 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of 14 units of ventilation duct terminals. The required items are identified as commercial products under NSN 4520013989767 and Northrop Grumman Systems Corporation part number 1D23418H01. The contract specifies a delivery timeframe of 171 days after receipt of order, with a need ship date of May 4, 2027, and an original required delivery date of September 7, 2027. Delivery is set as FOB Origin, with the destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by NAICS code 332322 and incorporates strict quality and packaging standards. Items must be packaged according to ASTM D3951 and palletized per RP001, with all marking and labeling adhering to MIL-STD-129. Technical and quality requirements are managed through the DLA Master List, specifically referencing RA001 for general requirements, RQ017 for bare item marking, and RQ011 for the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act and specific cybersecurity reporting standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Specialized Roof Components SupplyThis subcontract agreement involves the supply of specialized roof penetrations for prime contractors working on facility projects for the Alameda County General Services Agency Building Maintenance Department. The scope of work specifically requires the delivery of OSHA-approved acrylic dome skylights and watertight Greenheck aluminum passive vents directly to the project site located in Hayward, California. The opportunity was posted on November 5, 2026, with a response deadline set for December 17, 2026. Classified under NAICS code 332322, the contract focuses on the procurement and logistical delivery of critical roofing components to ensure safety and weatherproofing standards are met for county facilities.

Alameda County General Services Agency-Building Maintenance Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Custom Vehicle Cabinetry Fabrication and InstallationThis subcontract involves the design, fabrication, and installation of custom organizational cabinetry for two mid-size luxury SUVs supporting US Embassy Pretoria projects. The contractor is responsible for utilizing automotive-grade materials and precision cutting tools to create storage solutions that adhere to strict Embassy technical standards while ensuring that vehicle safety and warranties remain intact. The project is managed under the Department of State and will be performed in Pretoria, South Africa. The scope of work requires the contractor to coordinate with prime contractors to deliver fully installed custom cabinetry within the specified vehicles.

US Embassy Pretoria

POSTED

about 16 hours ago

DEADLINE

Vehicular Component Bracket Supply (NSN 2590016915363)This subcontract involves the supply of 31 specialized vehicular component brackets for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations. The contractor is responsible for manufacturing or sourcing brackets that strictly adhere to the technical specifications of NSN 2590016915363 while ensuring full compliance with the Buy American and Balance of Payments Program requirements. To qualify for this engagement, the provider must maintain CMMC Level 2 certification and hold an approved US/Canada Joint Certification Program certification to handle ITAR and EAR technical data. The project falls under NAICS code 332322 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Critical Application Sleeve Bearings (P/N HS5445-1)This subcontract involves the procurement and delivery of four specialized sleeve bearings, part number HS5445-1, sourced from the Roller Bearing Company of America, Inc. These components are intended for prime contractors delivering to the Department of Defense under the DLA Weapons Support ASC Commodities Division. Due to the nature of the equipment, the items must adhere to Critical Application Item quality standards. The contract requires the submission of receiving reports through the Wide Area Workflow system. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 332510. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Plain Rod End Bearing Supplier (NSN 3120014551641)This subcontract involves the supply of five inspected plain rod end bearings for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing NSN 3120014551641, also known as GE part L31302G02, which is classified as a Configuration Control Item. All deliverables must adhere to strict military standards, including marking per MIL-STD-130N and packaging requirements according to MIL-DTL-197M and MIL-STD-2073-1E. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The performance of this contract is centered in San Diego, California, under NAICS code 332991. Responses to this opportunity are due by November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 11 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)This subcontract involves the procurement of 3,908 blind rivets to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to Part Number CCR274SS-3-6 and NSN 5320-00-718-0835, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this contract. All deliverables must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The final shipment of 3,908 units is to be delivered FOB Origin to Tinker AFB, Oklahoma. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-00-269-0783)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 8,627 socket head cap screws. The components must strictly adhere to NSN 5305-00-269-0783 specifications, with marking and packaging requirements governed by MIL-STD-129 and MIL-STD-2073-1E respectively. All units are to be delivered to a designated destination point for final inspection and acceptance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Albany. Interested parties must respond by November 13, 2026, to provide these essential supplies for prime contractors supporting DLA Weapons Support supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Defense Packaging and Shipping Services

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Manufacturer of Retaining Rings (NSN 5325002570209)

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Bi-Directional Marker Poles

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Aluminum Alloy 5086 Plate Supplier

DLA Maritime - Puget Sound

POSTED

about 16 hours ago

DEADLINE

in about 18 hours

Precision Shim Fabrication (NSN 5365-01-507-9586)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Air Duct Cooling Coil (NSN 4130016020484)

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-01-185-4560)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of STINGER, LOWER (NSN 2510-01-567-8305)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS