Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nonmetallic Hose Assembly Fabrication

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of 97 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 1/2 inch inside diameter and a nominal overall length of 108.0 inches, including perforated covers. All production must strictly adhere to NSN 4720-01-359-0598 and RA001 standards. The project is subject to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026.

General Info

Fabricate 97 nonmetallic hose assemblies for DoD by November 2, 2026, in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

326199 - All Other Plastics Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1559.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONMETAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures nonmetallic hose assemblies for prime contractors on DLA Weapons Support Fluid Handling Division projects. Fabricates assemblies with 1/2 inch inside diameter and 108.0 inch nominal overall length with perforated covers per NSN 4720-01-359-0598 and RA001 standards. Requires Buy American Act and Berry Amendment compliance. Delivers 97 completed nonmetallic hose assemblies.

Similar Contracts

Same NAICS industry code

Composite Panel Manufacturing (NSN 2540-01-577-3732)This subcontract involves the fabrication of 20 composite panels for prime contractors supporting DLA Weapons Support projects. Manufacturing must strictly adhere to Basic Drawing NR 19207 12509359 Revision D using traditional composite layup and molding techniques, as additive manufacturing is explicitly prohibited. The final deliverable consists of 20 finished composite panels to be performed in Tracy, California. To be eligible, the contractor must maintain an ISO 9001:2015 or equivalent inspection system. Additionally, US/Canada Joint Certification Program certification is required to ensure full compliance with ITAR and EAR regulations. The opportunity is listed under NAICS code 326199 for the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

High-Performance O-Ring Supplier (Mark 46/48 Torpedoes)This subcontract involves the supply of 150 specialized O-rings, identified by NSN 5331-01-031-8287, to support prime contractors for the DLA Weapons Support Land Supply Chain, specifically for Mark 46/48 Torpedoes. The supplier is responsible for manufacturing the components to exact technical specifications to ensure full material compatibility with Otto Fuel. All items must be delivered to Bremerton and packaged in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, with labeling adhering to MIL-STD-129 and MIL-STD-130N standards. To qualify for this contract, the provider must hold JCP certification and maintain either SAE AS9003 or ISO 9001 quality management certifications. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026. This procurement falls under NAICS code 326199 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging ServicesThis subcontract involves providing specialized packaging services for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations. The primary objective is the sealing of UV-sensitive gaskets using medium duty, waterproof, greaseproof, and opaque bags. All work must be performed strictly according to MIL-DTL-117 standards to ensure complete protection against ultraviolet rays, utilizing professional vacuum or heat sealing equipment. The scope of work requires the delivery of two gaskets, sealed and packaged for shipment, to DLA Distribution DDSP New Cumberland. This project falls under NAICS code 326199 and is managed by the DLA Weapons Support Land Supplier Opns Vehicle SPT. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Protective Dust and Moisture Seal PlugsThis subcontract involves the manufacture of 2,500 protective dust and moisture seal plugs and caps for prime contractors supporting DLA supply contracts. The components must be fabricated to NSN 5340-01-146-9729 dimensions using precision molding or machining of specialized plastics, rubbers, or polymers. All production must adhere to the Buy American Act and Berry Amendment, with quality assurance sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project is managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, with performance taking place in New Cumberland. Interested parties must note the response deadline of November 2, 2026. The contract falls under NAICS code 326199 and requires the delivery of 2,500 finished seal plugs.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Supply of Preformed O-Rings (NSN 5331008079637)This subcontract involves the manufacture or procurement of 89 preformed O-rings matching NSN 5331008079637 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is required to apply Special Marking Code 32 and ensure all marking adheres to MIL-STD-129. Packaging must be completed in accordance with MIL-STD-2073-1E, RP001, and IP025 standards, utilizing specific cushioning and dunnage to ensure product integrity. The final deliverables are to be shipped to the DLA Distribution DISP New Cumberland Facility in New Cumberland, Pennsylvania. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Plain Encased Seal ManufacturerThis subcontract involves the manufacture and delivery of 24 plain encased seals for critical applications to support the DLA Weapons Support Land Supplier Opns Vehicle Spt. The seals must be produced in accordance with NSN 5330-01-428-9408 and Part Number 212-340-103-101, adhering strictly to the DLA Master List of Technical and Quality Requirements RA001. The project requires strict adherence to the Berry Amendment and the Buy American Act regarding material sourcing. Performance for this contract is located in Corpus Christi, Texas, under NAICS code 326199. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Manufacturer of Vehicular Cowl Insulation (NSN 2540-01-383-5232)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

O-Ring (NSN 5331-01-481-4049) Supplier

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

High-Performance O-Ring Manufacturer (NSN 5331-00-459-9469)This subcontract involves the precision manufacture and delivery of 1,258 O-rings for the Department of Defense under the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-00-459-9469 and the DLA Master List of Technical and Quality Requirements, with a strict mandate that all materials are asbestos-free. To ensure regulatory compliance, the manufacturer must adhere to the Berry Amendment and the Buy American Act. Eligible providers are required to hold PRI QML or QPL accreditation to qualify for the project. Performance will take place at Robins Air Force Base, with a response deadline set for November 2, 2026. The contract falls under NAICS code 326199 and is intended for prime contractors supporting these specific land supply chain operations.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720-01-245-6616)This subcontract involves the supply of 709 feet of specialized nonmetallic tubing for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must feature a 0.050 inch inner diameter and a 0.110 inch outer diameter, strictly adhering to Saint-Gobain F4040A specifications. The supplier is responsible for ensuring all materials comply with the Buy American Act and ASTM D3951 standards. Additionally, all products must be packaged and marked in accordance with MIL-STD-129 and DLA Master Lists RA001 and RP001. Performance for this contract is centered in Tracy, California.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of O-Rings (NSN 5331011309664)This subcontract involves the supply of 620 O-rings matching NSN 5331011309664 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for sourcing the parts and ensuring they undergo rigorous sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331 Table 1. Additionally, all items must be packaged according to RP001 DLA Packaging Requirements for Procurement before final delivery. The project falls under NAICS code 326199 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 2, 2026, following the posting date of October 22, 2026. The final deliverable consists of 620 fully inspected and packaged O-rings meeting all specified military and agency standards.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Manufacturing and Supply of Special Shaped Section Seals (NSN 5330-01-342-5737)This subcontract involves the manufacture and supply of nonmetallic, special-shaped section seals under NSN 5330-01-342-5737 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating seals that strictly adhere to NAVSEA 5100-003D standards, ensuring all materials are mercury-free and contain zero asbestos. Additionally, the contract requires full traceability for NAVAIR aircraft launch and recovery equipment and mandates that all finished products be delivered in MIL-DTL-117 UV-protective packaging. Managed by the Department of Defense, the project falls under NAICS code 326199 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Globe Valve Parts Kit SupplierThis subcontract involves the supply of 49 completed and packaged globe valve parts kits for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The scope of work includes the manufacturing or sourcing of components, kit assembly, and packaging in strict accordance with MIL-STD-2073-1 Appendix D. Additionally, the supplier must ensure all marking and labeling comply with MIL-STD-129 and provide Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. The project falls under NAICS code 332911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 2, 2026, to be considered for this procurement effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 97 hose assemblies, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001. The contractor must utilize industrial labeling equipment and MIL-SPEC packaging materials to meet strict military standards. The completed deliverables are to be transported to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 493110 and is designated for prime contractors supporting the agency's fluid handling operations.

General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing military-grade packaging and marking services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the preparation of five valves for First Destination Transportation shipment, ensuring full preservation and traceability of the fluid handling components. Technical execution must strictly adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, utilizing QUP 001, Pres Mthd AE, and designated cushioning and dunnage materials. The performance of these services will take place in Tracy, California, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-238-5948)This subcontract involves the procurement or manufacture of five specialized safety relief valves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must match Eaton Aerospace part numbers 847357 and L1-CS-06-B-50, falling under NSN 4820-01-238-5948. Performance will take place in Tracy, California, with all deliverables subject to strict sampling and quality assurance standards according to MIL-STD-1916 or ASQ H1331. The contractor must ensure full compliance with the Buy American Act and adhere to environmental prohibitions regarding the use of mercury and hexavalent chromium. Interested parties must respond by November 2, 2026, to fulfill the requirements of this specialized equipment supply effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Special Plug (NSN 5342-00-839-1515)This subcontract involves the procurement of 13 units of a special plug, identified by NSN 5342008391515, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for fabricating or sourcing the hardware to ensure full compliance with the established NSN technical specifications. Strict adherence to military and industry standards is required for quality assurance and logistics. All items must be inspected and sampled according to MIL-STD-1916 or ASQ H1331 Table 1, packaged in accordance with ASTM D3951, and marked and labeled per MIL-STD-129. Performance of the contract will take place in Cherry Point, with a response deadline set for November 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

DLA Compliant Packaging and PrepThis subcontract, titled DLA Compliant Packaging and Prep, involves the specialized packaging and preparation of filter assemblies for prime contractors fulfilling DLA supply contracts. The scope of work requires all components to be packaged and labeled using industrial materials in strict accordance with RP001 DLA Packaging Requirements to ensure protection during transit and full adherence to government receiving standards. The final deliverables must be ready for First Destination Transportation. The project is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 2, 2026, and the associated NAICS code 561910.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS