Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Notice of Intent to Award Sole Source - Chamber Services, Inc.-

Active
PANAPG26P0000052283Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through the W6QK Acc-Apg Cont Ct Software Sector office located at Fort Huachuca, Arizona, has issued a Notice of Intent to Award a sole source contract to Chamber Services, Inc. for services under the NAICS code 339999, which covers other miscellaneous manufacturing. There is no set-aside designated for this procurement, meaning it is open without restrictions for small businesses or other socio-economic categories. The solicitation number is PANAPG26P0000052283, and the notice was posted on August 7, 2026, with a response deadline of August 11, 2026, at 4:00 p.m. Eastern Time. The place of performance is also Fort Huachuca, Arizona. Primary point of contact is Neil Mendiola, reachable at neil.s.mendiola.civ@army.mil, with secondary contact Rosa L Rascon at rosa.l.rascon.civ@army.mil. Additional details regarding the scope, requirements, and rationale for sole source selection are contained in the attached Notice of Intent to Award document, accessible via the provided SAM.gov link.

General Info

DoD plans sole-source award to Chamber Services Inc. for miscellaneous manufacturing services at Fort Huachuca, Arizona.

Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software SectorView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

Fort Huachuca, AZ, 85613, USA

Set-Aside

NONE

Documents

(1)

Notice of Intent to Award Sole Source - Fire Detection System Repair and Replacement

PDF•notice-of-intent

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Software Sector
Contacts2 people available
OfficeFORT HUACHUCA, AZ, 85613-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector
View Agency Profile
Office AddressFORT HUACHUCA, AZ, 85613-5000, USA
Contacts
Neil Mendiola
contact@example.gov
Rosa L Rascon
contact@example.gov

Full Description

Show more

Refer to the attached Notice of Intent to Award Sole Source for more details.

Similar Contracts

Same NAICS industry code

NAICS: 339999
New
Federal
Auxiliary Shield SupplyThe contract seeks the supply of an auxiliary radiation shield to augment existing primary shielding in areas where radiopharmaceuticals are handled, ensuring enhanced protection for personnel and compliance with safety standards. This subcontract is governed under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM, providing a limited window for qualified vendors to submit proposals. The place of performance and specific location details are not specified, suggesting the shield may be delivered to a designated VA facility or multiple sites across the country. No set-aside provisions are identified, meaning the contract is open to all eligible contractors regardless of business size or status. The absence of a point of contact and detailed address information implies that further inquiries must be directed through the official SAM.gov portal linked in the posting.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
PET Sharps Container Insert SupplyThe contract is for the supply of an insert designed specifically for use in shielded sharps containers to organize and protect their contents, ensuring safe handling and storage of medical waste. The item is categorized under NAICS code 339999, which pertains to other miscellaneous manufacturing, and the procurement is structured as a subcontract under the Department of Veterans Affairs. The opportunity was posted on August 7, 2026, with a response deadline of August 12, 2026, giving potential suppliers a five-day window to submit proposals. The contract is managed by the 245-NETWORK Contract Office 5, indicating it is part of a larger federal contracting framework. The place of performance and point of contact details are not specified, and no set-aside type is designated, meaning the opportunity is open to all eligible subcontractors without restriction based on business size or demographic categories.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
PET Shield Sharps Container SupplyThe contract involves the supply of a shielded sharps container designed specifically for the safe disposal of contaminated needles and medical materials in PET environment settings, ensuring radiation safety and compliance with stringent handling protocols. The item must meet rigorous shielding standards to protect personnel from exposure to radioactive substances while facilitating secure, compliant disposal practices within healthcare and research facilities under the Department of Veterans Affairs. Submitted as a subcontract under NAICS code 339999, the opportunity is open for responses through August 12, 2026, with no set-aside specifications applied. The contract is managed by the 245-NETWORK Contract Office 5 (36C245), and performance is expected to align with operational needs in VA facilities, though specific location details are not provided. Interested parties must submit proposals by the deadline to qualify for award consideration under this procurement initiative.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
Lead Brick Cave (3-Wall) SupplyThe contract entails the supply of a custom 2-inch lead brick cave featuring three walls, designed specifically for modular radiation shielding in nuclear medicine laboratory environments. The shielding structure is engineered to provide reliable containment of ionizing radiation, ensuring compliance with safety standards in facilities handling radioactive materials for medical diagnostics and treatment. The lead bricks are to be manufactured to precise dimensional and density specifications to ensure structural integrity, ease of assembly, and optimal radiation attenuation without gaps or inconsistencies. This subcontract opportunity, issued under NAICS code 339999 for other miscellaneous manufacturing, is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM. The place of performance and exact delivery location are unspecified, indicating flexibility in logistics, though the equipment must be ready for deployment in VA-affiliated nuclear medicine labs. Bidders must be prepared to meet stringent quality controls for radiation shielding materials and provide documentation verifying material composition, lead equivalence, and compliance with relevant nuclear safety regulations.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
L-Block Shield SupplyThe contract pertains to the supply of a compact L-block lead shield specifically designed for dose calibration shielding in the preparation of radiopharmaceuticals, ensuring stringent radiation protection standards are met during handling and preparation processes. The item is critical for minimizing occupational exposure and maintaining compliance with safety protocols in nuclear medicine and radiopharmaceutical environments. The procurement is structured as a subcontract under the Department of Veterans Affairs, managed by the 245-NETWORK Contract Office 5, with the NAICS code 339999 indicating it falls under miscellaneous manufacturing. The solicitation was posted on August 7, 2026, and responses must be submitted no later than August 12, 2026, at 4:00 p.m. The place of performance and point of contact details are not specified, but performance is expected to satisfy the technical and safety requirements associated with radiopharmaceutical preparation facilities.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
Lead-Lined PET Unit Dose Cabinet SupplyThe contract seeks the supply of an OEM-manufactured, brand-name lead-lined cabinet designed specifically for the safe storage and handling of radiopharmaceuticals used in PET imaging. The cabinet must meet stringent safety and shielding standards to ensure the secure containment of radioactive materials during preparation, storage, and transport within clinical settings. As a subcontract opportunity, it is open to qualified suppliers capable of providing certified, industrial-grade equipment that complies with regulatory requirements for radiation safety and medical device integrity. The item is intended for use in healthcare facilities under the jurisdiction of the Department of Veterans Affairs, specifically managed through the 245-NETWORK Contract Office 5. The solicitation was posted on August 7, 2026, with a firm response deadline of August 12, 2026, at 4:00 PM. The North American Industry Classification System code 339999 identifies this as an Other Medical and Dental Equipment Manufacturing category, indicating the product falls under specialized medical device manufacturing. There is no set-aside designation specified, meaning all eligible contractors may compete without restriction. The place of performance and point of contact details are not provided, suggesting delivery and coordination details will be determined post-award. Interested parties must submit proposals via the official SAM.gov platform using the provided link before the deadline to be considered for award.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
Federal
Painting & Surface FinishingThe contract titled Painting & Surface Finishing requires the application of high-quality paint and surface finishes to vehicle bodies that meet original equipment manufacturer appearance standards, ensuring flawless results with no runs, sags, discoloration, or orange peel. This work must be performed to exacting visual and technical criteria to maintain the integrity and aesthetic quality expected by OEM specifications. The solicitation is designated as a Small Business Set Aside under the SBA program, indicating that only qualified small businesses are eligible to bid, and the North American Industry Classification System code is 339999, which covers other miscellaneous manufacturing. The opportunity was posted on August 7, 2026, with responses due by August 14, 2026, at 7:00 p.m. The contract is structured as a subcontract and will be performed at a location in Dinosaur. The contracting activity is the GSA/FAS Automotive Center under the General Services Administration.
Gsa/fas Automotive Center

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
Federal
FMS Case: ZB-B-WDR_KENYA
Solicitation # ZB-B-WDR_26_KENYA
This RFQ seeks proposals from vendors for a Foreign Military Sales procurement on behalf of Kenya under FMS Case ZB-B-WDR_KENYA, with the solicitation number ZB-B-WDR_26_KENYA. Vendors must complete all green cells in RFQ Attachments 1 and 2 and strictly quote the requested color or pattern specified in Column D, with NSN data provided only for reference. Technical submissions must clearly demonstrate how the proposed product meets each specification listed in Column B of Attachment 1, including side-by-side comparisons for any alternative materials, with explicit identification of compliant features through highlighting or circling. Proposals must be submitted exclusively through the Unison Marketplace by 1:00 PM EST on August 20, 2026, and any questions must be raised via email by August 12, 2026. The Government will evaluate offers solely based on initial submissions and will not solicit revisions, though it reserves the right to request clarifications during evaluation. Only one quote per vendor is permitted, with no multiple options allowed. Award will follow the Lowest Price Technically Acceptable (LPTA) method within Unison Marketplace, and the Government may make multiple awards to different vendors if no single offeror meets all requirements or provides acceptable pricing for all items. Price fairness and reasonableness will be determined through analysis under FAR 15.404-1, and additional data may be requested if necessary. The vendor’s submitted spreadsheet information will become part of the final contract call. Shipments must be delivered to a single U.S.-based address with no drop shipments permitted, and material must be available for pickup within the continental United States. Partial shipments are acceptable, but the award is contingent on available funding, and the Government may cancel the requirement at any time without penalty. The solicitation is a Small Business Set Aside under NAICS code 339999, managed by the U.S. Army Contracting Agency in Falls Church, Virginia, with Jason Goode as the primary point of contact.
Xr W4QS US Army Contracting Agy

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
Federal
FMS Case:ZB-B-VTD_TAIWAN
Solicitation # ZB-B-VTD_26_TAIWAN
This RFQ is for a Foreign Military Sales procurement on behalf of Taiwan, issued under FMS Case ZB-B-VTD_TAIWAN with solicitation number ZB-B-VTD_26_TAIWAN, and is exclusively open to small businesses under a total SBA set-aside. Vendors must complete all designated green cells in RFQ Attachments 1 and 2, quoting the exact color/pattern specified in Column D, and provide detailed technical documentation that clearly demonstrates how their proposed product satisfies each specification listed in Column B of Attachment 1. Technical submissions require side-by-side comparisons for any alternative materials, with explicit markings highlighting compliance against the stated requirements. Pricing will be evaluated using price analysis per FAR 15.404-1 to ensure fairness and reasonableness, and the government may request additional data if insufficient information is provided. Award will be made on a Lowest Price Technically Acceptable basis through the Unison Marketplace, with only one quote permitted per vendor and no multiple options allowed. The government reserves the right to evaluate proposals without seeking revisions but may ask clarifying questions during assessment. Submission must occur via Unison Marketplace by 1:00 PM EST on 20 August 2026, with inquiries due by 12 August 2026. Proposals submitted outside this platform will be rejected. All awarded items must be made available for pickup within the continental U.S., with one designated shipping address and no drop shipments permitted. Partial shipments are acceptable, but awards are contingent on fund availability and may be canceled without penalty. Final contract terms will incorporate data provided in the submitted RFQ spreadsheets, and WAWF and shipping details will be issued upon award.
Xr W4QS US Army Contracting Agy

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
Federal
FMS Case: TU-B-UDO_TUNISIA
Solicitation # FMS_TU-B-UDO_RFQ
This solicitation is a Foreign Military Sales (FMS) procurement initiated by the U.S. Department of Defense for the Republic of Tunisia, with the solicitation number FMS_TU-B-UDO_RFQ and classified as a Small Business Set Aside. Vendors must respond through the Unison Marketplace platform by 1:00 PM EST on 20 August 2026, and only one quote per vendor is permitted. All technical and pricing responses must be submitted via the prescribed RFQ Attachment 1, with mandatory completion of all green cells and accurate quoting of the specified color/pattern in Column D. Vendors are required to provide detailed technical documentation that explicitly demonstrates compliance with each specification listed in Column B, using side-by-side comparisons for any alternative materials and clearly highlighting where their product meets each requirement. Price evaluation will rely on price analysis techniques under FAR 15.404-1 to ensure fairness and reasonableness, with the government retaining the right to request additional data if necessary. The award will follow the Lowest Price Technically Acceptable (LPTA) model and may be split among multiple vendors if no single offeror provides all items at a fair and reasonable price. Proposals must be complete and final at submission since the government does not plan to request revisions, though it may seek clarifications during evaluation. All supplied information may be incorporated into the resulting contract, and shipments must be delivered to a single U.S.-based address within the continental United States for pickup, with drop shipments prohibited. Partial shipments are allowed, but awards are contingent on available funding and subject to cancellation without penalty. Questions must be submitted via email to Unison Marketplace by 12 August 2026, and no proposals outside the Unison platform will be considered.
Xr W4QS US Army Contracting Agy

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
SLED
Equipment & Amenity Supply (Play Structures, Benches, etc.)
Mcduffie County Board of Commissioners

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 339999
New
SLED
Disc Golf Basket Supply and InstallationBaltimore County Government is seeking a subcontractor to supply and install 32 disc golf baskets using approved models, along with necessary spare components. The baskets must be equipped with padlocks that are keyed alike and provide a minimum of two inches of shackle clearance to ensure uniformity and security across all installations. The contract requires full delivery, setup, and integration of the equipment, with an emphasis on adherence to specified technical standards. Bidders must respond by August 13, 2026, at 3:30 PM, with the solicitation classified under NAICS code 339999 for other miscellaneous manufacturing. The project is intended for performance within Maryland, though specific location details are not provided, and all submissions must comply with the county’s procurement requirements as outlined in the external portal.
Baltimore County Government

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

Same awarding agency

NAICS: 541715
New
Federal
ARMY OPEN SOLICITATION (AOS)
Solicitation # W9128Z-25-S-A002
The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002, is an indefinite, open solicitation issued by the U.S. Army Contracting Command – Aberdeen Proving Ground to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas. Designed to revitalizing the industrial base and enhancing Warfighter lethality, the solicitation leverages a flexible acquisition framework under multiple FAR, DFARS, and U.S. Code authorities, including Other Transactions, Commercial Solutions Opening, and prototype authorities. It supports both Active Capability Gap submissions and periodic Calls for Solutions, with responses evaluated based on technical merit, feasibility, schedule, price estimation, viability, and desirability using a trade-off approach rather than lowest price technically acceptable. The solicitation remains open indefinitely until canceled, with recent amendments through March 2026 expanding and clarifying Army Example Areas, refining submission procedures, and updating contracting information including Active Capability Gap mailboxes. All submissions must adhere to strict formatting requirements, including a single PDF submission not exceeding five pages or fifteen slides, with mandatory inclusion of an executive summary, company information, and rough order of magnitude cost and schedule estimates. Offerors must be registered in SAM, use WAWF for invoicing, and comply with stringent data storage and security requirements, including U.S.-only data hosting and full organizational conflict of interest disclosures. The solicitation encourages participation from small businesses, nontraditional defense contractors, and nonprofit research institutions, with specific certifications required through the Affirmation of Business Status Certification. Performance may occur at government facilities including Aberdeen Proving Ground and other CONUS/OCONUS locations as directed, with award timing anticipated in fiscal year 2026, and support expected through 2032. No fixed contract value is provided, as pricing is determined through competitive evaluation of commercial proposals under the solicitation's open-ended structure.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 237990
New
Federal
Repair Buffalo Soldier Gate Fence
Solicitation # W91RUS26RA010
The contract titled Repair Buffalo Soldier Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the Office of W6QK Acc-Apg Cont Ct Software Sector, located at Fort Huachuca, Arizona. The solicitation number is W91RUS26RA010 and was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. It is classified under NAICS code 237990, indicating it pertains to other heavy and civil engineering construction, and is wholly reserved for small businesses as per the SBA’s Total Small Business Set-Aside guidelines. Work is to be performed at Fort Huachuca, Arizona, with no specific city or state provided beyond the ZIP code 85613. The primary point of contact for inquiries is Nadia Firestone, reachable by phone at 520-692-1411 or via email at nadia.i.firestone.civ@army.mil. Interested parties must submit proposals through the SAM.gov platform using the provided URL before the deadline to be considered.
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 237990
New
Federal
Repair Van Deman Gate Fence
Solicitation # W91RUS26RA011
The contract titled Repair Van Deman Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the W6QK Acc-Apg Cont Ct Software Sector, with solicitation number W91RUS26RA011 and NAICS code 237990. It is exclusively reserved for small businesses as defined under the SBA Total Small Business Set-Aside provision, ensuring opportunities for qualified small business contractors. The solicitation was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. Work will be performed at Fort Huachuca, Arizona, 85613, and all performance obligations must be satisfied at this location. The primary point of contact for inquiries is Nadia Firestone, reachable via phone at 520-692-1411 or email at nadia.i.firestone.civ@army.mil. This contract falls under the Office category and is part of the broader Department of Defense infrastructure maintenance efforts focused on securing and restoring critical perimeter fencing assets at the Fort Huachuca installation.
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 611430
New
Federal
Capstone Project Design and Evaluation for DE Certification ProgramThe contract entails the design and evaluation of a capstone project for the DE Certification Program, specifically tailored to allow trainees to apply digital engineering and model-based systems engineering principles to authentic U.S. Army acquisition scenarios. The project must incorporate structured rubrics for assessment, targeted mentoring support, and a clear methodology for evaluating trainee performance against defined competency benchmarks. Its purpose is to bridge theoretical knowledge with practical application in a military acquisition context, ensuring participants develop the skills necessary to contribute effectively to modern defense systems development. This effort is classified as a subcontract under NAICS code 611430, indicating an educational services focus, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. While details such as the place of performance and point of contact are not specified, the project is expected to operate within the broader framework of Army modernization initiatives and must align with existing DE and MBSE standards used across defense acquisition programs. The successful bidder will be responsible for creating a scalable, measurable, and pedagogically sound capstone experience that delivers tangible outcomes for certification readiness.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 541690
New
Federal
Data Governance and Digital Thread Implementation TrainingThe contract seeks to deliver specialized training on managing engineering data through digital thread methodologies, focusing on establishing end-to-end traceability and seamless interoperability across disparate systems and platforms. Participants will learn how to implement governance structures that ensure data integrity, consistency, and accessibility throughout the product lifecycle, enabling efficient collaboration and decision-making in complex engineering environments. The training is designed to equip technical teams with practical skills to align data processes with industry best practices and support modernized defense acquisition and systems engineering workflows. Issued under the NAICS code 541690 for other professional, scientific, and technical services, this subcontract falls under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector and is open for responses until August 11, 2026. The work is not subject to a specific set-aside classification, and performance location details are not specified, indicating flexibility in delivery format or site. While no point of contact is listed, the opportunity is accessible via the SAM.gov portal, and proposers are expected to demonstrate expertise in digital thread frameworks, data governance, and cross-platform integration within defense or aerospace engineering contexts.
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 541690
New
Federal
Cybersecurity Integration via NIST RMF in Digital Engineering TrainingThe contract seeks to deliver specialized training on integrating the NIST Risk Management Framework into Digital Engineering workflows to enhance secure development practices, ensure proper data handling, and maintain model integrity throughout the system lifecycle. This effort is targeted at organizations and personnel involved in cyber-secure engineering environments, with a focus on embedding NIST RMF controls directly into digital engineering processes to reduce vulnerabilities and promote compliance with federal cybersecurity standards. The training must be practical, hands-on, and aligned with current DoD cyber resilience objectives. Issued as a subcontract under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector, the opportunity is classified under NAICS code 541690 for Other Scientific and Technical Consulting Services. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. There is no specified set-aside status or place of performance location, and the contract does not include a designated point of contact. Interested parties must submit proposals through the provided SAM.gov link before the deadline to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 541715
New
Federal
AI and LLMs Integration in Systems Engineering TrainingThe contract seeks the development and delivery of specialized training modules focused on integrating artificial intelligence and large language models into systems engineering workflows, with emphasis on practical applications in requirements generation, risk analysis, and documentation automation. The training is designed to equip systems engineering professionals with the skills to leverage AI tools effectively, improving efficiency and accuracy in critical project phases. The work is structured as a subcontract under the Department of Defense, specifically managed by the W6QK Acc-Apg Cont Ct Software Sector, and classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 11, 2026, at 4:00 PM. Performance location and specific agency office details are not provided, and no set-aside provisions or point of contact information are included in the posting.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 611430
New
Federal
Delivery of Foundational Digital Engineering and MBSE Instructor-Led TrainingThe contract calls for the delivery of 40 hours of instructor-led training in Digital Engineering and Model-Based Systems Engineering, to be conducted either at Aberdeen Proving Ground or through a secure virtual platform. The training curriculum must comprehensively address core concepts including the digital thread, model-based practices, and lifecycle integration, ensuring participants gain practical and theoretical mastery of modern engineering methodologies. The work is structured as a subcontract under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector, with a NAICS code of 611430 indicating educational services in the professional and scientific technology sector. Proposals must be submitted by August 11, 2026, at 4:00 PM, following the posting date of August 5, 2026. The training is intended to support defense-related technical workforce development, with no specific set-aside designation noted. While the precise location and point of contact details are not provided, performance is expected to occur either in person at the designated government facility or via a secured remote environment compliant with federal cybersecurity standards. The contract seeks qualified providers capable of delivering high-impact, hands-on instruction aligned with DoD digital engineering initiatives.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 611430
New
Federal
Digital Engineering and MBSE Training Curriculum DevelopmentThe contract calls for the design and development of a modular training curriculum focused on Digital Engineering and Model-Based Systems Engineering, specifically aligned with Department of Defense Instruction 5000.97. The scope includes creating comprehensive course outlines, hands-on exercises, formal assessments, and seamless integration with digital tools used in DoD environments. The curriculum must be structured to support progressive learning and practical application, ensuring personnel are equipped with the skills required to implement modern engineering practices in defense systems acquisition and lifecycle management. This subcontract, posted on August 5, 2026, requires proposals to be submitted by August 11, 2026, and falls under NAICS code 611430 for other professional and management consulting services. The work is sponsored by the Department of Defense under the W6QK Acc-Apg Cont Ct Software Sector, with performance expected to support defense-wide digital engineering initiatives. While specific location details are not provided, the training output will need to be scalable and compatible with DoD-wide deployment standards. The solicitation is open to qualified subcontractors capable of delivering curriculum that meets rigorous federal standards for technical accuracy, instructional design, and operational relevance.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 611430
New
Federal
RFI - Engineering Training Courses for Army Systems Engineering & Architecture
Solicitation # RFIEngineeringandArchitectureTrainingCourses
The Office of the Assistant Deputy for Acquisition & System Management, Data Engineering and Software is issuing a Request for Information to conduct market research for professional training services focused on Army Systems Engineering and Architecture. The solicitation, titled RFI - Engineering Training Courses for Army Systems Engineering & Architecture, is open for vendor responses until August 11, 2026, and is managed under the W6QK Acc-Apg Cont Ct Software Sector of the Department of Defense. The goal is to identify qualified vendors capable of delivering specialized training to support the development and implementation of engineering and architectural practices across Army systems. All responses must be submitted by the stated deadline to ensure consideration. The primary point of contact for inquiries is Nekeya Sanders, with Lindsay Vierheller serving as the secondary contact, both reachable through their official Army email addresses. The office is located at Aberdeen Proving Ground, Maryland, and while the place of performance has not been specified, vendors should be prepared to deliver services in alignment with DoD requirements. This is a sources-sought notice, and no formal contract award is anticipated at this stage—this RFI is strictly for market research to inform future acquisition planning.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 611430
Federal
Industry Day hosted by Army Systems Engineering & Architecture
Solicitation # ASA(ALT)_DE_INDUSTRYDAY_AUG2026
The Army Systems Engineering & Architecture office under the Office of the Assistant Secretary of the Army (Acquisition, Logistics and Technology) is hosting an industry day on August 20, 2026, from 0900 to 1500 at the Mallette Training Facility in Aberdeen Proving Ground, Maryland. This event is designed to provide industry partners with updates on recent achievements in digital engineering and to identify areas where industry input and collaboration can help address current challenges. Participation is open to all organizations engaged with or interested in digital engineering topics, and attendance is available both in person and virtually, with mandatory registration required for either option. The deadline to register is Wednesday, August 12, 2026, at 1200 hours EST via the provided RSVP form. This event is strictly for informational purposes and does not serve as a solicitation, nor does it initiate any procurement action, though it is related to the DE_ECOSYS_RFI. The point of contact for inquiries is Army Systems Engineering & Architecture at asea@army.mil, and the activity is managed under the solicitation number ASA(ALT)_DE_INDUSTRYDAY_AUG2026 with the posting date of July 20, 2026.
Professional and Management Development Training

POSTED

19 days ago

DEADLINE

in 4 days
View Details
NAICS: 511210
Federal
FOCI Risk Intelligence & Personnel Veting Platform SubscriptionThe contract involves the provision of a commercial off-the-shelf SaaS subscription designed to deliver continuous Foreign Ownership, Control, or Influence (FOCI) risk intelligence. This platform will offer automated triage capabilities for personnel and entities, focusing on identifying and managing affiliations with adversarial nations to support security and compliance requirements. The solution is intended to enhance the Department of Defense’s ability to monitor and assess potential risks associated with foreign influence efficiently. Issued as a subcontract under NAICS code 511210, the contract is managed by the Department of Defense's W6QK Acc-apg Cont Ct Software Sector. While specific details such as the solicitation number, place of performance, and point of contact are not provided, the offering centers on a robust intelligence tool tailored to the unique needs of government security protocols. This SaaS platform is designed to support continuous monitoring and risk mitigation efforts to protect sensitive operations from foreign influence threats.
Software Publishers

POSTED

3 months ago

DEADLINE

N/A
View Details