Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Notice of Intent to Sole Source: SemiLab Ellipsometer Parts, Service, and Training

Active
166109Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Bureau of Engraving and Printing, specifically the Office of Technology Development at the DC Currency Facility, intends to award a sole-source purchase order to SemiLab Trade LLC. This contract covers the procurement of proprietary replacement parts, corrective maintenance, training, and annual preventative maintenance for the SemiLab SE-2000 Ellipsometer. This instrument is critical for the Research Analysis Division's material characterization, research and development, and production-support studies. The award is being pursued under FAR 12.102(a) because SemiLab Trade LLC is the original equipment manufacturer and holds the necessary patents, intellectual property, and technical expertise required for the equipment's upkeep. Interested parties must submit electronic responses to the Contracting Officer, Kaiti Williams, by September 23, 2026. This notice serves as an intent to sole source rather than a request for competitive quotations.

General Info

Sole-source contract for SemiLab SE-2000 Ellipsometer parts, maintenance, and training via SemiLab Trade.

Agency

Department Of The Treasury → Bureau Of Engraving And PrintingView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Washington, DC, 20250, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Bureau Of Engraving And Printing
Contacts1 person available
OfficeN/A
Organization / Agency
Department Of The Treasury → Bureau Of Engraving And Printing
View Agency Profile
Office AddressN/A
Contacts
Kaiti Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

The Treasury Common Services Center – Acquisition Services intends to award a sole-source purchase order to SemiLab Trade LLC for SemiLab SE-2000 proprietary replacement parts, corrective maintenance, training, and annual preventative maintenance. This is for the Bureau of Engraving and Printing (BEP), DC Currency Facility, Office of Technology Development. The purchase order will be awarded under RFO FAR 12.102(a), as the Contracting Officer has determined that only one source is available. SemiLab Trade LLC is the original equipment manufacturer (OEM) and owns the patent/proprietary intellectual property, parts, schematics, and technical capability required to maintain, calibrate, and repair the BEP-owned SemiLab SE-2000 Ellipsometer, an essential analytical instrument used by the Research Analysis Division for material characterization, research and development investigations, and production-support studies


This notice of intent is not a request for competitive quotations. A determination not to compete this requirement based upon responses to this notice is solely within the discretion of the Government. Any responses shall be submitted electronically to the Contracting Officer at kaiti.williams@bep.gov by the date and time specified in this notice. No telephone inquiries will be accepted.

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
Federal
66--CONTROL-DISPLAY UNI, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB24
This presolicitation notice from the Navsup Weapon Systems Support is for the repair or modification of 12 units of control-display units under NSN 7R-6610-016701033-H5. The delivery terms are FOB Origin. Due to the flight critical nature of the parts and the specialized technical data and manufacturing knowledge required, the government requires engineering source approval from the design control activity to maintain quality standards. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Prospective contractors who are not already approved sources must submit detailed information as outlined in the NAVSUP WSS Source Approval Information Brochures to be considered for award. Failure to provide the required source approval data will result in the proposal not being considered.
Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
BORESIGHT KIT CALIBRATION and REPAIR
Solicitation # N6833526R1106
The Department of Defense, through the Navair Warfare Ctr Aircraft Division, is seeking sources for the programmed maintenance, repair, and calibration of Boresight kits used by the USN and USMC. This requirement is specifically intended for the Original Equipment Manufacturer, The Boeing Company, as they possess the proprietary technical drawings and specialized equipment necessary to maintain the form, fit, and function of the Boresight for F/A-18 A-F and EA-18G aircraft. This sources-sought opportunity, identified by solicitation number N68335-26-R-1106, falls under NAICS code 811210. The procurement is managed by the office located at Joint Base MDL, New Jersey, with a response deadline of September 8, 2026. There are currently no set-asides applied to this requirement.
Navair Warfare Ctr Aircraft Division

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811210
New
Federal
Land Mobile Radio Repair
Solicitation # AO68831
The Department of Defense, specifically the 341 Cons Lgc office at Malmstrom AFB, is conducting market research via a Sources Sought notice for Land Mobile Radio Repair services. This effort aims to determine the availability of responsible sources to decide if the procurement will be a total Small Business Set-aside. The applicable NAICS code is 811210 for Electric and Precision Equipment Repair and Maintenance, which carries a small business size standard of 34 million dollars. Interested parties, including 8(a), Service-Disabled Veteran-Owned, Hubzone, and Women owned small businesses, must respond by September 17, 2026. Submissions should identify the company's small business status, detail any anticipated teaming arrangements with a clear division of work between the prime and partners, and provide a description of similar services performed for government or commercial clients over the past three years.
FA4626 341 Cons Lgc

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
58--CONTROL,INTERCOMMUN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RBB09
This presolicitation under solicitation number N0038326RBB09 is for the repair or modification of 146 units of intercommunication controls, identified by NSN 7R-5831-014683473-QE. The contract is issued by the Navsup Weapon Systems Support and specifies delivery as FOB Origin. Due to the flight critical nature of the item and the lack of available technical data for competitive bidding, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, though new applicants may apply for approval by submitting the required documentation detailed in the NAVSUP WSS Source Approval Information Brochures. Failure to provide all necessary data or proof of a pending application will result in the offer not being considered. The government is not utilizing FAR Part 12 for commercial items, although interested parties may notify the contracting officer of their capability to provide a commercial alternative within 15 days of the notice.
Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
Repair and Calibration of the following test equipment: T313-1, T313-2, T229, T374, T605, T153 and T800
Solicitation # 142082-26-0518
Request for Quotation 142082-26-0518 is a small business set-aside issued by the National Oceanic and Atmospheric Administration under the Department of Commerce. The contract seeks a firm-fixed price provider to perform repair and calibration services for various test equipment, including power sensors, signal generators, digital oscilloscopes, step attenuators, frequency counters, and spectrum analyzers. The objective is to restore the equipment to like-new operating condition and appearance according to original manufacturer specifications. The vendor is responsible for all labor, materials, and secure shipping to the National Reconditioning Center in Grandview, Missouri. Award will be based on best value, where non-price factors, specifically the detailed production plan and delivery timeframe, are weighted slightly more than the all-inclusive price. Prospective vendors must be registered in the System for Award Management and provide a written quote valid for at least 30 days, including their Unique Entity ID, CAGE code, and a response to the Organizational Conflict of Interest clause. Quotes must be submitted via email to the designated contracting officer by September 17, 2026, at 12 PM CT. Partial quotes and partial awards will not be considered.
Department Of Commerce Noaa

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
Repair/Replacement of the following equipment: SENSOR, SETRA MODEL 470-T, ASN: S100-1A6A1-1.
Solicitation # NRD-142082-26-0540
The National Weather Service National Reconditioning Center intends to acquire repair or replacement services for 50 Setra Model 470-T sensors to restore them to like new operating condition according to original manufacturer specifications. The government is considering a single-source procurement from Setra Systems Inc, the original equipment manufacturer, under the authority of restricting competition. Any equipment that fails to meet the required specifications after service must be reworked at no additional cost to the government. Interested firms must be registered in the System for Award Management and provide detailed information regarding their capabilities, including past performance and a quote covering repair costs, shipping, and delivery schedules. Responses must be submitted in writing to the National Reconditioning Division within five calendar days of the notice publication. This acquisition is being processed under the procedures for commercial products and services with a NAICS code of 811210.
Department Of Commerce Noaa

POSTED

about 11 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
Federal
Liquid Chromatography-Mass Spectrometry (LC-MS) system Maintenance Plan
Solicitation # USAFA_FY26_LC-MS_Maint
The US Air Force Academy intends to award a sole source firm fixed price contract to AB SCIEX LLC for a comprehensive maintenance, calibration, and repair services package for a Liquid Chromatography-Mass Spectrometry system. This package includes support for the mass spectrometer, liquid chromatography system, gas generator, and proprietary software diagnostics. AB SCIEX LLC is identified as the only responsible source capable of meeting the requirement because they are the original equipment manufacturer and the sole provider of authentic replacement parts and warranty-compliant calibration. The anticipated award date is September 30, 2026, with a base period of performance running from September 30, 2026, through September 29, 2027, followed by four one-year option periods. While a formal solicitation will not be posted, interested parties may submit capability statements to the contracting officer by September 14, 2026, provided they can demonstrate that competition would be advantageous to the government. All interested contractors must maintain active registration with the System for Award Management.
FA7000 10 Cons Lgc

POSTED

about 11 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
Federal
DirecTV based Cable Headend System Maintenance and Repair
Solicitation # W9136426QA081
The Ohio National Guard is seeking a contractor for the maintenance and repair of its DirecTV based cable headend system under solicitation W9136426QA081. The project involves the procurement and installation of critical hardware, including four HDMI MPEG2 digital video encoders, sixteen DirecTV H26 receivers, an off-air ATSC to QAM modulator, line amps, and rack shelves. The selected provider must integrate these components into the existing system, replace outdated ZeeVee modulators, program off-air signals, and balance outputs for the building's coax distribution network. This is a total small business set-aside opportunity managed by the Department of Defense in Columbus, Ohio. Interested parties must submit all questions by 12:00 PM ET on September 14, 2026, and submit final quotes via email to the designated points of contact by 12:00 PM ET on September 18, 2026.
W7NU Uspfo Activity Oh Arng

POSTED

about 11 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811210
New
Federal
Metasys Calibration Services
Solicitation # 36C26126Q0953
The Department of Veterans Affairs, through the VA Central California Health Care System in Fresno, is seeking a contractor for the annual calibration, repair, and system accuracy verification of the Metasys Building Automation System. The scope of work focuses on critical clinical and facility areas, including negative pressure rooms in the ICU, Emergency Department, Medical Surgical, GI Unit, Morgue, and Pharmacy Cache, as well as the Operating Room and Surgical Processing Service. The contractor is responsible for ensuring that airflow, differential pressure, temperature, and humidity parameters are calibrated to manufacturer specifications and remain compliant with VA, OSHA, and Joint Commission regulations. The project requires a lead technician with documented experience in large-scale projects and mandates adherence to strict safety codes, including lock-out/tag-out programs and the use of VA-issued security badges. This procurement, identified by solicitation number 36C26126Q0953, is currently in a market research phase to determine the procurement strategy, with an intent to award a sole source firm fixed price contract to Johnson Control Inc. The proposed period of performance includes a base year from September 30, 2026, to September 29, 2031, with four additional option periods. The contract is designated as a Small Business Set Aside under NAICS code 811210. Interested vendors must provide a comprehensive capability statement, including socioeconomic status, UEI/CAGE codes, a list of similar projects, and an authorization letter from Johnson Control Inc. All work must be coordinated with the assigned Contracting Officer's Representative and performed during normal business hours, with any after-hours or weekend work requiring prior official approval.
261-NETWORK Contract Office 21 (36C261)

POSTED

about 11 hours ago

DEADLINE

in about 20 hours
View Details
NAICS: 811210
New
Federal
Fish Barrier Maintenance and Repair IDIQ
Solicitation # W912P626QA021
Solicitation W912P626QA021 is a total small business set-aside for a single-award Indefinite Delivery/Indefinite Quantity (IDIQ) contract to provide repair and maintenance services for the Electric Fish Dispersal Barrier System on the Chicago Sanitary and Ship Canal in Romeoville, Illinois. The contract spans a four-year period of performance with a minimum value of 5,000 dollars and a maximum value of 3.5 million dollars. The scope of work includes routine preventive maintenance, scheduled overhauls, and emergency rapid-response repairs for critical assets such as high-voltage pulsers, power distribution panels, standby generators, rectifiers, UPS systems, and cooling arrays. Emergency services require on-site troubleshooting within four hours of notification to maintain barrier field integrity. The procurement is conducted under FAR Part 12 for commercial products and services, with awards based on a trade-off between price and past performance. Contractors must adhere to strict reporting requirements, delivering maintenance and repair reports within 10 calendar days of service completion. Technical compliance includes following manufacturer recommendations and industry standards for generator load testing. Additionally, the contract mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) level requirements and requires a contractor-specific Quality Control Plan to be approved prior to the pre-performance conference. All quotes must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) by the amended deadline of September 9, 2026.
W072 Endist Chicago

POSTED

about 11 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811210
New
Federal
Karl Storz Endoscopy Service Contract DC VAMC
Solicitation # 36C24526Q0823
The Department of Veterans Affairs is seeking a contractor to provide comprehensive service and maintenance for Karl Storz scope and camera equipment at the Washington DC VA Medical Center located at 50 Irving Street NW. The selected contractor will be responsible for providing all necessary labor, personnel, equipment, tools, materials, and supervision required to maintain the endoscopy equipment. This solicitation, identified by number 36C24526Q0823 under NAICS code 811210, was posted on September 9, 2026. Interested parties must submit their responses by the deadline of September 17, 2026, at 3:00 PM. The contract is managed by the Network Contract Office 5 within the Department of Veterans Affairs.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
SLED
Signage Maintenance & Support Provider
SCHOOLS - Tewksbury Public Schools

POSTED

about 18 hours ago

DEADLINE

in 21 days
View Details

More opportunities from Department Of The Treasury → Bureau Of Engraving And Printing

Same awarding agency

NAICS: 333242
Federal
Specialized Security Printing and ManufacturingThis subcontract for the Bureau of Engraving and Printing under the Department of the Treasury focuses on specialized security printing and manufacturing for government security projects. The contractor is responsible for implementing covert authentication features and hidden machine-readable markers into physical substrates using specialized printing processes to deliver finished security-enhanced materials. The project is categorized under NAICS code 333242 and is based in Washington. The solicitation was posted on November 14, 2025, with a response deadline set for November 15, 2026.
Semiconductor Machinery Manufacturing

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 541715
Federal
Hidden Machine Readable Security Features DevelopmentThis subcontract with the Bureau of Engraving and Printing under the Department of the Treasury focuses on the development of hidden machine readable security features for government security projects. The project involves utilizing specialized material science to research and design covert authentication markers and anti counterfeiting technology that remain invisible to the human eye but can be detected by machines. The contractor is responsible for delivering comprehensive technical specifications and prototypes for these covert security markers. This work is categorized under NAICS code 541715 and is based in Washington. The opportunity was posted on November 14, 2025, with a response deadline set for November 15, 2026.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 541715
Federal
Applied Security Feature Technology (Surface Application)
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 322121
Federal
Security Substrate Development & Supply
Paper (except Newsprint) Mills

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 325510
Federal
Security Ink Development & Supply
Paint and Coating Manufacturing

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Hidden Machine-Readable Security Features - FY26
Solicitation # 2031ZA26N00005
The Bureau of Engraving and Printing (BEP) under the Department of the Treasury has issued Request for Information (RFI) 2031ZA26N00005 to identify novel, emerging technologies and materials for use as hidden machine-readable security features on future U.S. currency. The agency is seeking features that are difficult for subject matter experts to discover, resistant to simulation or duplication, and readable by highly discriminating standalone detection systems. Proposed solutions must be novel and not currently in the public domain or commercial use. Submissions will be evaluated based on their inherent effectiveness as security features, as well as their durability, environmental acceptability, and compatibility with production and design factors. This RFI is for informational planning purposes only and does not constitute a formal solicitation or a commitment to award a contract. Interested parties must submit a brief technical description and preliminary samples to the BEP R&D technical lead in Washington, D.C., with capability statements due via email to the designated points of contact by 2:00 PM Eastern Time on November 15, 2026. The government will not reimburse any costs associated with responding to this notice, and respondents are cautioned not to include proprietary, classified, or sensitive information in their submissions.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

10 months ago

DEADLINE

in 2 months
View Details
NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Overt Security Features - FY26
Solicitation # 2031ZA26N00006
The Department of the Treasury, Bureau of Engraving and Printing (BEP), has issued Request for Information (RFI) 2031ZA26N00006 to identify novel technologies and materials for use as overt, visual authentication security features on future U.S. currency. The objective is to discover counterfeit deterrents that are easy for the general public to authenticate without external devices but are extremely difficult to simulate or duplicate using traditional printing, digital reproduction, or commercially available materials. These features may be integrated into the banknote substrate and inks or applied directly to the note. This RFI is for market research and informational planning purposes only; it is not a formal solicitation, does not constitute a commitment to contract, and will not result in payment for response costs. Interested parties must submit preliminary samples and a brief technical description to the BEP R&D technical lead, Chris Dollberg, by November 15, 2026. Submissions will be evaluated based on their inherent effectiveness as a security feature, durability, environmental acceptability, and compatibility with production and design factors. Respondents are cautioned not to include proprietary or classified information, as the government reserves the right to use non-proprietary technical information in future solicitations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

10 months ago

DEADLINE

in 2 months
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS