Notice Of Request For 2024 Lmig Resurfacing Bids

Bids are requested for resurfacing and shoulder grading of approximately 8.77 miles/20 ft. wide of county roads. The installation of 6 rumble strips are also included. The roads include Conners Church Rd., Hillside Church Rd., Cox Rd., Homer Waters Rd., Oak Grove Church Rd., East Hencart Rd., and Dasher Family Ln. The rumble strips are to be installed at the intersection of John M. Brewton Rd. and Beards Creek Church Rd. Resurface all roads with 1½¿/165 lbs. per sq.yd. of Recycled ASPH Conc. 12.5mm Super pave GP 2 only, Incl. Bitum Material & H Lime. Apply tack coat between existing surface and topping. Contractor is required to use a shuttle buggy for resurfacing. No Deep Base Patching is required. Shoulder grading to include clipping shoulders prior to resurfacing and building shoulders to match pavement. Grassing to include 4¿ of shoulders. Stripe with solid white line on edge and solid/skip double yellow line in the center with 24¿ stop bars at each intersection. ¿High Build Paint¿ per GDOT specification ¿652 ¿ Painting Traffic Stripe¿ is to be used for striping. Centerline is to be marked with temporary tape striping between resurfacing and final striping. A certification from the striping contractor verifying material and placement specifications will be required. The contractor is responsible for placing low shoulder and advanced warning signs. The contractor will be responsible for providing material pits for shoulder grading. The contractor will be given a 14 day notice to proceed. All work is to be completed by October 31, 2024. Tattnall County reserves the right to accept or reject any or all bids. Contractor must be authorized to use and uses the federal work authorization program commonly known as E-Verify, or any subsequent replacement program, in accordance with the applicable provisions and deadlines established in O.C.G.A. 13-10-91. Contractor must supply their E-Verify number, workers comp and liability insurance verification with their bid.