Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NOZZLE, FUEL AND OIL SE

Active
SPE8EE-26-T-2122Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two fuel and oil servicing nozzles with part number 4930-01-360-5540, supplied either by W. H. Smith Hardware Company, OPW Fueling Components Inc., or Catlow Inc., all under contract SPE8EE-26-T-2122. Each nozzle must include a ground cable assembly and comply with strict labeling requirements, including the NSN, contract number, and date of manufacture; improperly labeled items will be rejected. The item is classified as a Type 2 shelf life item with a 12-month extendable lifespan, marked with special code 33 as required. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific methods for preservation, wrapping, cushioning, and unit containment, and all palletization must follow DLA packaging guidelines. Delivery is scheduled within 20 days, FOB origin, with zero tolerance for quantity variance, and inspection occurs at the destination. The shipment must be sent via traceable freight, excluding parcel post, to Fort Irwin, California, with detailed marking and tracking codes applied. Technical and quality requirements are governed by the DLA Master List, and covered defense information provisions apply. The contract is issued under the DoD unit of issue system, with a total value of $4.00 for the two units, and the original required delivery date is July 16, 2026.

General Info

Two fuel nozzles, NSN 4930-01-360-5540, shipped FOB origin to Fort Irwin by July 16, 2026, with strict labeling and packaging standards.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

DEPOT ST REC WHSE BLDG 860, FORT IRWIN, CA, 92310-9986, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8EE-26-T-2122 for DLA Troop Support Construction Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NOZZLE,FUEL AND OIL SERVICING
NOZZLE,FUEL AND OIL SERVICING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CONTRACTOR TO ENSURE THAT MATERIAL IS MARKED/LABELED PROPERLY, TO
INCLUDE AT A MINIMUM THE NSN, CONTRACT NUMBER, AND DATE OF MANUFACTURE.
MATERIAL NOT LABELED PROPERLY WILL BE REJECTED.
NOZZLE COMES WITH GROUND CABLE ASSY.
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
W. H. SMITH HARDWARE COMPANY, THE 8W529 P/N 1500MBFN
OPW FUELING COMPONENTS INC. DIV 81718 P/N 190G-5104/616W-B800
CATLOW, INC. 69616 P/N 1500MBFN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017539794 0001 EA 2.000
NSN/MATERIAL:4930013605540
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8EE-26-T-2122
SECTION B
PR: 7017539794 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GH CUSH/DUNN MAT:DA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
MARKFOR
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
M/F: (TCN) W80QJK61920063
RDD: 217
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
SPE8EE-26-T-2122 NSN/Part Number: 4930-01-360-5540 Quantity: 2 EA Purchase Request: 7017539794QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
Supply of Cooling System Engine Pump (NSN: 2930013594992)The contract obligates the supplier to manufacture or provide one military-specification cooling system pump designed for engine applications, strictly compliant with the National Stock Number 2930013594992. The unit must meet all applicable military standards and specifications to ensure operational reliability in demanding environments. Delivery is required FOB Destination to Fort Buchanan in Puerto Rico, meaning the supplier bears all transportation costs and risks until the item arrives at the designated location. This subcontract falls under NAICS code 333914, which classifies it within the industrial machinery manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, though no solicitation number is provided. Performance details are limited, but the end destination and NSN clearly define the scope, emphasizing compliance, traceability, and secure delivery to a U.S. military installation.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 333914
New
DIBBS
PUMP, LUBRICANT TRANThe contract pertains to the procurement of 16 units of a lubricant transfer pump identified by NSN 4930-01-223-3730 under solicitation SPE8E9-26-T-3131, with a response deadline of July 23, 2026, and a delivery requirement within 83 days of award. This is a Women-Owned Small Business Set-Aside solicitation, classified under NAICS code 333914, issued by the Department of Defense through the Construction & Equipment MRO Service I office. The place of performance is specified as New Cumberland, PA, with Matthew Kruc designated as the primary point of contact. The contract incorporates all applicable DLA packaging, technical, and quality requirements referenced through R and I numbers from the DLA Master List, and compliance with these requirements is mandatory. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in specified items such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary as defined by NAVSEA 5100-003D. The contractor is also required to overpack one manufacturer’s commercial manual covering operation, service, maintenance, and repair instructions for each unit provided.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
IMPELLER, PUMP, CENTRIFU
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
DIBBS
NOZZLE, FUEL AND OILThe contract solicitation SPE8EE-26-T-2100 seeks 22 units of NOZZLE, FUEL AND OIL under a Total Small Business Set-Aside (FAR 19.5) with a NAICS code of 333914. The requirement is for delivery to Tracy, CA 95304-5000 within 167 days from the As Directed Order (ADO), with an original delivery target date of March 19, 2027, and a need ship date of January 4, 2027. The delivery is FOB Origin, meaning risk transfers to the government at the point of shipment, though inspection and acceptance occur at the destination. The solicitation is governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 where applicable, and requires packaging compliance with ASTM D3951, palletization per RP001, and labeling and marking in accordance with MIL-STD-129, including barcoding using GS1-128 or Data Matrix formats. Hazardous materials must be labeled per 29 CFR 1910.1200 and MIL-STD-129, with SDS and labels submitted for review if not covered by other federal statutes such as FIFRA or FDCA. Radioactive materials must also be clearly marked per MIL-STD-129. The contract mandates compliance with cybersecurity standards including 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, as well as 252.204-7018 prohibiting the acquisition of covered telecommunications equipment. Offerors must represent their small business status with current UEI and CAGE codes, and if applicable, identify any joint venture partners with their UEIs. Affirmative responses regarding the provision of covered defense telecommunications equipment or services require detailed disclosures of suppliers, including UEI, CAGE code, and entity type (OEM or distributor). Invoicing must be submitted electronically via WAWF only. The solicitation includes numerous Federal Acquisition Regulation clauses covering contractual type, small business representation, equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material safety, intellectual property rights, subcontracting, inspection at destination, default, whistleblower rights, and data safeguarding, among others. Although pricing data is incomplete in Section B and
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
MOTOR, HYDRAULICThe contract is for the procurement of two hydraulic motors, identified by NSN 4320-01-233-7014, under solicitation SPE7M1-26-T-196Z, with a response deadline of July 20, 2026, and a delivery requirement of 168 days after order. Full and open competition applies, and the item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date depending on acquisition size. The contract mandates adherence to Configuration Change Management procedures and Tailored Higher Level Contract Quality Requirements applicable to both manufacturers and non-manufacturers. Export control restrictions apply due to technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, with compliance enforced through DFARS 252.225-7048; only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access such data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and covered defense information protocols are in effect. The place of performance is New Cumberland, PA, with Michael Reese of the Department of Defense, Maritime Supply Chain, listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
FILTER ELEMENT, FLUIThe contract is for the procurement of a fluid filter element, designated by part number 7583216 and NSN 4330-01-166-8391, with a total quantity of 980 units to be delivered within 251 days under the solicitation number SPE7M1-26-T-219K. The item is classified as a critical application item and must comply with all applicable DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The supply must be free of intentionally added mercury or mercury-containing compounds except for specific allowable uses such as batteries, fluorescent lights, instrumentation, weapon systems, or chemicals specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. Delivery is FOB origin and inspection and acceptance occur at the destination. The unit price is $980.00 per unit, totaling $960,400.00, and the contract is awarded under a total small business set-aside. The required delivery date is January 10, 2027, with a need ship date of October 21, 2025. The item shall be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics follow DLAD procedural notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
DIBBS
RING, DISTRIBUTIONThis contract solicitation is for twenty-five distribution rings, identified by NSN 4330-01-313-0046, under a Total Small Business Set-Aside with NAICS code 333914, issued by the Department of Defense’s Maritime Supply Chain through DLA. The solicitation number is SPE7M1-26-T-197V, with a response deadline of July 23, 2026, and a required delivery date 143 days after award. The item is a restricted source requiring engineering source approval by the government’s design control activity. All submissions must comply with DLA packaging requirements and incorporate technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Suppliers must provide comprehensive documentation per MIL-T-31000 including full manufacturing drawings and specifications, detailed process and operation sheets outlining critical steps and inspection criteria, identification of all sources for critical operations such as forgings and castings, and copies of purchase orders if available. A shock extension report conforming to MIL-S-901 and DI-ENVR-80706 is mandatory. If original equipment manufacturer drawings are unavailable, offerors must submit an engineering analysis report detailing the development process, including reverse engineering methodology, sample count, measurement techniques, compiled data, and justification for dimensional deviations and acceptance criteria. This data will be transmitted to the government’s engineering support activity for review. The delivery location is Tracy, California, with primary point of contact Michael Reese at DLA.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
IMPELLER, PUMP, CENTRThe contract specifies the procurement of a single centrifugal pump impeller, designated as NSN 4320-00-267-9153 and part number C5219 by Oberdorfer Foundries Inc. The impeller is a multi-blade, backward-curve design made of bronze, with a single-width configuration featuring five blades and designed for counter-clockwise rotation. It has an overall diameter of 3.594 inches, a width of 1.000 inch, and a threaded mounting section with a 0.438-inch diameter, 20 threads per inch, right-hand, NF-UNF thread. All items must comply with the technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and quality assurance is governed by Provision 140A dated 1 Mar 83. The product is classified as a critical application item for Raytheon Company, and delivery is required within 20 days of contract award. The impeller must be shipped to the destination FOB, inspected and accepted at the delivery point, and packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 using the specified packaging code U. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for approved functional uses like batteries or instruments, and no ozone-depleting chemicals may be used in materials, preservation, or packaging. The shipment must utilize the fastest traceable transport method and cannot use parcel post, with the delivery address being USS CHOSIN CG-65, FPO AP 96662. The required delivery date is July 14, 2026, and the solicitation closes on July 31, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
Federal
Sole Source to Hammond Technical Services Inc. for (1) Expeditionary Mobile Fuel Additization Capability (EFMAC)
Naval Surface Warfare Center

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333914
New
Federal
Turbovac with cables and air cooling unit
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333914
New
Federal
43--IMPELLER,PUMP,CENTRIFU
DLA Land And Maritime

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
Federal
43--FILTER ELEMENT,FLUIThe U.S. Department of Defense, through DLA Land and Maritime, is seeking quotations for 980 units of Filter Element, Fluid, identified by NSN 4330011668391, under solicitation number SPE7M126T219K. This is a total small business set-aside classified under NAICS code 333914, meaning only small business concerns are eligible to respond. The contract requires delivery to DLA Distribution facility W1A8 with a required delivery date 251 days after award. The only approved source for this item is 05228 7583216, though all responsible small business sources may submit quotes provided they meet the solicitation’s electronic submission requirements. Hard copies of the solicitation are not available; all information must be accessed via the provided online link, and no specifications, plans, or drawings are included. Quotes must be submitted electronically by the deadline of July 31, 2026, and inquiries should be directed to the designated point of contact listed in the solicitation document.
DLA Land And Maritime

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting and Socioeconomic ComplianceThe contract requires comprehensive support for a prime contractor’s small business subcontracting plan, ensuring strict adherence to Federal Acquisition Regulation clauses related to socioeconomic programs. This includes verifying the eligibility status of subcontractors as Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, and HUBZone firms, with a focus on accurate documentation and ongoing compliance. The effort is designed to enable the prime contractor to meet federal small business subcontracting goals and maintain regulatory integrity throughout the performance period. Performance is centered at Holloman Air Force Base with a zip code of 88330-7706, and the work falls under NAICS code 541611, which pertains to management consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposal submission. The contracting agency is the Department of Defense under the organization name Construction & Equipment Manu & Con, and the contract type is classified as a subcontract, emphasizing the supporting nature of the services provided to a larger prime contractor fulfilling federal obligations.
Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight and Defense Supply Chain LogisticsThe contract involves the specialized transportation of defense supplies under FOB Origin terms, requiring timely delivery within 20 days of award and seamless integration with the Defense Logistics Agency’s logistics and tracking systems. All shipments must comply with DLA’s standardized processes for visibility, accountability, and real-time monitoring throughout the supply chain, ensuring full traceability from origin to final destination at Holloman Air Force Base, with a ZIP code of 88330-7706. The work is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation of freight, and is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the performance location is confirmed at Holloman AFB. While no specific point of contact or set-aside details are provided, contractors must be prepared to meet stringent defense logistics requirements and demonstrate proven capability in handling sensitive defense cargo under FOB Origin conditions. All parties must ensure full alignment with DLA’s digital tracking infrastructure to maintain operational readiness and compliance with military supply chain protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC ImplementationThe contract entails the implementation and ongoing maintenance of cybersecurity controls to achieve CMMC Level 2 compliance for systems that handle covered defense information. This subcontract requires the contractor to establish, document, and operationalize a robust cybersecurity framework aligned with the Cybersecurity Maturity Model Certification standards, ensuring that all technical and administrative safeguards are properly integrated into the defense information environment. The work must be performed at Holloman Air Force Base, with a focus on securing networks, devices, and data against potential threats while maintaining continuous compliance throughout the contract duration. All activities under this agreement must adhere to the North American Industry Classification System code 541512, indicating that the services fall under computer systems design and related activities. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense, specifically by the Construction & Equipment Manu & Con organization. The contract is not designated for any specific type of set-aside, and the place of performance is fixed at the specified zip code in New Mexico, requiring the contractor to meet all regulatory, technical, and reporting obligations in alignment with federal defense cybersecurity mandates.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract involves specialized packaging and labeling of defense supplies that contain hazardous materials, requiring strict adherence to safety and regulatory standards. This includes the preparation of Material Safety Data Sheets and full compliance with hazard warning requirements to ensure safe handling, storage, and transportation throughout the defense supply chain. The work must be performed in accordance with federal guidelines for hazardous material management and is classified as a subcontract under NAICS code 561910, which pertains to other support services for waste management. The opportunity was posted on July 20, 2026, with a response deadline of July 31, 2026, and the place of performance is designated at Holloman Air Force Base with the ZIP code 88330-7706. The contracting agency is the Department of Defense under the organization title Construction & Equipment Manu & Con, and all activities must support defense-specific operational needs. While no point of contact information is provided, interested parties can access additional details through the official DIBBS portal using the provided RFQ link.
Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Defense Ammunition Component ManufacturingThe contract mandates the manufacture of CROSSHEAD and AMMONITION TRAILER components to stringent military specifications, requiring full adherence to ASTM standards for material and process integrity as well as DLA packaging guidelines to ensure safe handling and transport. Comprehensive supply chain traceability is mandatory throughout production, demanding documented provenance of all raw materials, subcomponents, and assembly processes to meet defense-grade accountability requirements. Production must be executed with precision to ensure compatibility, durability, and operational reliability under austere military conditions. The work is classified as a subcontract under NAICS code 332999, with performance required at Holloman Air Force Base, zip 88330-7706, and the response deadline for submissions is July 31, 2026. The contract is issued by the Department of Defense through the organization titled CONSTRUCTION & EQUIPMENT MANU & CON, and while no specific solicitation number or point of contact is listed, all bids must be submitted via the provided DIBBS portal link to be considered. Failure to comply with specified standards or traceability protocols will result in immediate rejection, regardless of price or timeline.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
Supply of HUB (NSN 3930-01-123-2526)One unit of a HUB identified by NSN 3930-01-123-2526 and part number 679739 is to be procured and delivered in full compliance with all packaging, labeling, and invoicing specifications. Delivery must be completed within five days of contract award, with terms set at FOB origin. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a subcontract type with NAICS code 333612. The contract is managed by the Department of Defense under the agency name Construction & Equipment Manu & Con, and performance is required at a location in McAlester, Oklahoma, with a zip code of 74501-5000.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
CROSSHEAD, AMMUNITIOThe contract pertains to the procurement of one unit of a CROSSHEAD, AMMUNITION TRAILER with NSN 1730-01-256-2370 under solicitation SPE8EF-26-T-1472, with a response deadline of July 31, 2026, and a required delivery within 20 days after award. The acquisition falls under NAICS code 336413 and is managed by the Department of Defense through the Construction & Equipment Manu & Con agency, with performance location at Holloman AFB, zip 88330-7706. The contractor must comply with DLA packaging requirements, incorporate all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, and adhere to the requirements for Covered Defense Information. Compliance with Cybersecurity Maturity Model Certification Level 2 is mandatory, requiring a self-assessment. The contractor must also remove government identification from any non-accepted supplies and provide a complete data package including details for both the approved and alternate parts, as no sampling data is available. The point of contact is Russell Keiser, reachable via email and phone, and the solicitation is posted on the DIBBS platform.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
CRADLE, GROUND HANDLING
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CLAMP ASSEMBLY, LOWEThe contract is for one unit of a CLAMP ASSEMBLY, LOWER with NSN 1730-01-312-5825, under solicitation SPE8EF-26-Q-0135, with a required delivery within 60 days after award. The purchase request number is 7016529252, and the quantity requested is two units. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons—regardless of location—is strictly regulated and requires prior authorization from the Department of State or Department of Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, and extends to foreign national employees. Compliance with DFARS 252.225-7048 is mandatory. Access to the controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation was posted on July 20, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense through the Construction & Equipment Manufacture & Construction organization, with Russell Keiser listed as the primary point of contact.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333923
New
DIBBS
WEBBING ASSEMBLY, SI
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
HOUSING, MECHANICAL DRIThe contract pertains to the procurement of four housing mechanical drive units under NSN 3950-01-625-6159, with a delivery requirement of 167 days after order. It is issued under solicitation SPE8EE-26-T-2088, open for response until July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. The procurement is subject to DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandated, and the handling of covered defense information is required per applicable regulations. The supplier must comply with engineering exceptions that supersede outdated specifications such as ASME B18.2.4.3M, ASTM B265, ASTM B348, and DIN standards, replacing them with updated versions effective as of specified dates. Drawings for the item are accessible only during the open solicitation period via the DIBBS portal, and the place of performance is designated as New Cumberland, Pennsylvania, with Philip Ferrara listed as the primary point of contact.
Other Support Activities for Air Transportation

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
BLOCK AND TACKLE
Other Fabricated Wire Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details