Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NOZZLE, FUEL AND OIL SE

Active
SPE8EE-26-T-2207Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of seven fuel and oil servicing nozzles under NSN 4930-00-861-9982, with a delivery deadline 156 days after award, as part of purchase request 7017585209. The solicitation number is SPE8EE-26-T-2207, issued by the Defense Logistics Agency, and requires strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The nozzle must include source-controlled components sourced only from approved suppliers listed on the applicable source control drawing. All items must be marked per MIL-STD-130N for identification. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero defects required for acceptance unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons without prior government authorization, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors with U.S./Canada Joint Certification Program approval, completed training, and DLA authorization. The contract also incorporates DLA packaging requirements and mandates the removal of government identification from non-accepted supplies. The vendor must hold CMMC Level 2 certification as a third-party assessment organization, and all work will be performed at the designated location in New Cumberland, Pennsylvania.

General Info

Procurement of seven fuel nozzles with strict quality, export control, and CMMC Level 2 requirements for delivery in New Cumberland, Pennsylvania.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8EE-26-T-2207.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NOZZLE,FUEL AND OIL SERVICING
NOZZLE,FUEL AND OIL SERVICING
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST CONFORM TO SOURCE CONTROL DRAWING. BY
SUBMITTING AN OFFER, THE OFFEROR AGREES TO
PROVIDE SOURCE CONTROLLED COMPONENTS FROM
SOURCES APPROVED ON THE APPLICABLE SOURCE
CONTROL DRAWING."
IDENTIFY TO
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE8EE-26-T-2207
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4930-00-861-9982 Quantity: 7 EA Purchase Request: 7017585209QTY: 7 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
SLED
Pumping System Improvements
Solicitation # PE-77004-NONST-2026-000000002
Sealed bids are being solicited by the Georgetown-Quitman County Unified Government for the construction of Pumping System Improvements under solicitation number PE-77004-NONST-2026-000000002, with submissions due by 11:00 AM local time on September 8, 2026, at Georgetown City Hall in Georgetown, Georgia. The project requires the purchase and delivery of a single centrifugal vacuum prime pump that is skid-mounted and fully equipped with all necessary appurtenances to ensure it is ready for immediate operation upon delivery. Contractors must provide all materials, labor, and equipment to complete the work in full compliance with the project specifications. Bids must be submitted as a lump sum with unit pricing and may include alternate bid items as outlined in the official bid form. The solicitation is structured as a single prime contract with no set-aside provisions. Bidding documents can be reviewed during regular business hours at both the Issuing Office, Still Waters Engineering in Leesburg, Georgia, and at Georgetown City Hall. Documents are available electronically as PDF files for a non-refundable fee of $300, with an additional $100 charge for paper copies. Payment must be received before documents are distributed via email or other electronic means. Requests for documents and inquiries should be directed to Chad Griffin or Nikki Griffith at Still Waters Engineering. All bids will be publicly opened at the specified deadline and evaluated based on compliance with technical requirements and pricing structure. The project is located within Georgetown-Quitman County, Georgia, and the complete technical specifications and contractual terms are accessible only through the official bidding package obtained from the Issuing Office.
Unified Government of Georgetown-quitman County

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-26-T-248E
The contract is for the procurement of seven rotary pumps with an integrated thermistor, specifically designated for marine applications, where the OEM adds the thermistor without altering the part number. The item is identified by NSN 4320-25-160-7781 and must be ordered under the correct specifications to ensure compliance with marine operational requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA packaging requirements outlined in RP001, with palletization following specified guidelines. All units are to be delivered FOB origin, inspected and accepted at destination with no variance allowed in quantity. The delivery deadline is 157 days from the contract award, with the original required delivery date set for May 14, 2027, and a needed ship date of January 19, 2027. Each unit is priced at $7.00, totaling $49.00 for the full order. The contract, issued under solicitation SPE7M1-26-T-248E, is a total small business set-aside under NAICS code 333914, managed by the Department of Defense’s Maritime Supply Chain. Deliveries must be routed to the designated receive warehouse in Tracy, California, and transportation procedures must follow DLAD Proc Notes C19 and C20. The point of contact for inquiries is Michael Reese, with contract details accessible via the DIBBS portal.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
DIBBS
PUMP, HYDRAULIC RAM,
Solicitation # SPE7M1-26-T-223X
The contract solicitation SPE7M1-26-T-223X is a small business set-aside for the procurement of 33 hand-driven hydraulic ram pumps, identified by NSN 4320-00-492-3727 and part number 47D16393, under a total estimated value of $605.00. The requirement is split into two contract line items: 11 units at $11.00 each and 22 units at $22.00 each, both with a fixed unit price and no option quantities. The delivery deadline is April 13, 2027, with a need-to-ship date of January 6, 2027, and a 46-day delivery window from the award date. All units must be delivered FOB origin to the primary destination at DLA Distribution Cherry Point in North Carolina, with packaging, marking, and palletization strictly controlled under DLA’s RP001 requirements, MIL-STD-129 for labeling, and ASTM D3951 for general packaging—though the DLA Master List of Technical and Quality Requirements supersedes any conflicting provisions in ASTM D3951. The item is classified as a critical application, requiring adherence to all applicable government specifications including the prohibition of hexavalent chromium, hazardous material labeling per 29 CFR 1910.1200, and the exclusion of covered defense telecommunications equipment from communist Chinese military companies. The contract incorporates numerous federal acquisition regulations, including cybersecurity requirements under 252.204-7012 for safeguarding covered defense information, compliance with NIST SP 800-171 through a specific deviation, and electronic invoicing exclusively through Wide Area WorkFlow (WAWF). Offerors must represent their small business status under the SBA’s size standards and potentially qualify under socioeconomic categories such as WOSB, SDVOSB, or HUBZone, with UEI and CAGE codes required for verification. Special clauses mandate whistleblower protections, restrictions on mandatory arbitration, prohibitions on toxic substances, and transparency around compensation of former DoD officials. Inspection and acceptance occur at origin, with no variance allowed in quantity—strictly 33 units with zero tolerance for over or under shipment. The solicitation, issued by the Department of Defense’s Maritime Supply Chain, is subject to a
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-T-223B
This contract specifies the procurement of two wearing rings, identified by NSN 4320-01-673-9427 and part number 9-0092-02, supplied by Air & Liquid Systems Corporation, under solicitation SPE7M1-26-T-223B. The item is classified as a critical application item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliant to MIL-STD-129, no special marking required, and palletization following RP001 standards. Delivery is FOB origin with a 168-day lead time, final delivery due by January 22, 2027, and a required ship date of January 19, 2027. The supply line has zero variance tolerance, with inspection and acceptance occurring at the destination. The contract was issued as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333914 by the Department of Defense’s Maritime Supply Chain, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-228D
This contract specifies the procurement of a filter element for fluid systems under solicitation SPE7M1-26-T228D, with a required quantity of 375 units identified by NSN 4330-01-515-9016 and part numbers 01-535-018 and 91-493-201, supplied by WM W NUGENT & CO INC. Delivery is due within 168 days from contract award, with goods to be shipped FOB origin and inspected and accepted at the destination. The contract prohibits the intentional use or direct contact of mercury or mercury-containing compounds except in specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any chemical substitutions must be submitted for government approval unless explicitly permitted by the specification. This is a restricted-source item requiring engineering approval from the government design control activity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA’s packaging requirements. The unit of issue is each (EA), with no variance permitted in quantity. Delivery is directed to the DLA Distribution facility at New Cumberland, PA, and transportation procedures follow DLAD Proc Notes C19 and C20. The contract is a total small business set-aside under NAICS code 333914, with a response deadline of August 3, 2026, and an original required delivery date of December 23, 2026, though the needed ship date is January 19, 2027. Technical and quality requirements referenced in the DLA Master List are incorporated by reference, and all provisions supersede conflicting specifications without relaxing product performance standards.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
RESERVOIR, HYDRAULIC
Solicitation # SPE7M1-26-T-177T
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for two hydraulic reservoirs, NSN 4320015417546, to be delivered to W1A8 DLA Distribution within 144 days of award. The approved source for this item is listed as 82005 04-01-000, and only electronic submissions are accepted; hard copies of the solicitation are not available. The request for quotation, identified as SPE7M1126T177T, was posted on June 28, 2026, with responses due by July 9, 2026. No specifications, plans, or drawings are provided, and all responsible sources may submit a quote provided it is received on time. The solicitation is classified as combined and does not have a set-aside designation. The NAICS code is 333914, and the point of contact for inquiries is the buyer listed in Block 5 of the solicitation document, with further details accessible via the SAM.gov link. The office managing the procurement is located in Columbus, Ohio.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
HOUSING, FILTER
Solicitation # SPE7M0-26-T-026X
The contract pertains to the procurement of a housing filter with NSN 4330014802795 under solicitation SPE7M0-26-T-026X, requiring delivery of one unit within five days of award, shipped FOB origin with no tolerance for quantity variance. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The item is designated a critical application and must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort McCoy, Wisconsin. Packaging must be labeled with the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow DLA requirements. The contract includes detailed shipment identifiers, freight address, and marking instructions, with inspection and acceptance occurring at the destination. The original required delivery date is July 31, 2026, and all supplies must be free of government identification if rejected. Primary point of contact is Grace Beck with the Department of Defense, and the solicitation is issued under NAICS code 333914 for federal procurement.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
DIBBS
BODY
Solicitation # SPE7M1-26-T-231E
This contract, identified as SPE7M1-26-T-231E, is a DoD solicitation issued by the Maritime Supply Chain under the Department of Defense for the procurement of 53 units of an item identified by NSN 4320015239664 at a unit price of $53.00, totaling $2,809.00. Delivery is required within 127 days after order placement, with shipment terms specified as FOB Origin, meaning title and risk transfer to the government upon delivery at the contractor’s shipping point. The final destination for receipt and acceptance is the DLA Distribution San Joaquin warehouse located in Tracy, California, where all inspections and acceptances will be performed by the government. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging codes, and labeling standards, with palletization adhering to DLA’s RP001 requirements. The contract prohibits the intentional use of mercury or mercury-containing compounds in supplied items, except for approved applications such as batteries, sensors, weapon systems, and specific instrumentations as defined by NAVSEA 5100-003D, and requires shock-proof containment with a secondary barrier for any portable devices containing mercury. Class I ozone-depleting chemicals are strictly banned, superseding all specification requirements unless exceptions are explicitly permitted and approved. The contract imposes comprehensive compliance obligations under multiple FAR and DFARS clauses, including mandatory adherence to NIST SP 800-171 for safeguarding covered defense information, with a requirement for assessment of implementation under clause 252.240-7997. Contractors must comply with hazardous material labeling per 29 CFR 1910.1200 and DFARS 252.223-7001, and are obligated to immediately report any potential safety issues through clause 252.246-7003. Transportation by sea must utilize U.S.-flag vessels unless a waiver is granted under 252.247-7023. All submissions must be made electronically through the DLA Internet Bid Board System with a deadline of August 3, 2026, and invoices must be submitted exclusively via Wide Area WorkFlow. Offerors are required to provide their UEI and CAGE
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
DIBBS
PUMP, HYDRAULIC RAM,
Solicitation # SPE7M0-26-T-027P
This contract specifies the procurement of one hand-driven hydraulic ram pump identified by NSN 4320-00-911-5679 and part number 3520031 from GICHNER SYSTEMS GROUP, INC. The item must be delivered within five days to JBER, Alaska, under FOB origin terms with no tolerance for quantity variance. All packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using prescribed materials and methods including unit container EC, packing code U, and no special markings. The DLA packaging requirements and overseas container standards apply if weight limits are exceeded. The contract prohibits the use of any Class I ozone-depleting chemicals and requires approved substitutes if not already authorized by specifications. Inspection and acceptance occur at the destination, and all documentation aligns with DLA’s technical and quality requirements referenced from the DLA Master List. The delivery is tied to Solicitation SPE7M0-26-T-027P with a required delivery date of July 31, 2026, and the point of contact is Grace Beck at the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
Federal
Market Survey MTRRS Follow-on Production
Solicitation # PANDTA-26-P-0000-031169
The Army Contracting Command – Detroit Arsenal is conducting market research through a sources sought notice to evaluate industry capabilities for the follow-on production of the Mobile Tactical Retail Refueling System (MTRRS), identified by NSN 4930-01-691-6188. This system is designed to replace the aging Tank & Pump Unit and Tank Unit Liquid Dispensing systems by providing a versatile, transportable bulk fuel carrier and retail dispenser capable of operating across multiple platforms including cargo trucks, trailers, and Load Handling System flat-racks. The MTRRS enables company-level units to receive, store, and issue fuel to ground vehicles and equipment in all operational environments, supporting mission requirements under METT-TC conditions. The production effort is tied to a Government-provided Level 3 Technical Data Package governed by MIL-STD-31000, which includes detailed product definition, packaging, preservation, and marking requirements, though specific standards for labeling or preservation beyond this are not detailed. Access to the technical data package requires current DD Form 2345 certification through DLIS and access via the DoD SAFE portal, with stringent confidentiality and destruction protocols mandated for all proprietary information. The Government seeks responses that confirm production capacity, estimated unit costs, lead times, monthly and annual production volumes, and experience with First Article Testing and Production Verification Testing. Respondents must be registered in SAM.gov, provide their CAGE code, and indicate their business size and any applicable socioeconomic status, with small business claims subject to verification. Only U.S. contractors can access the TDP, and all submissions must be marked as confidential where applicable, with release statements permitting Government use of the information. Responses are due by August 24, 2026, and must be emailed directly to designated personnel, as no formal portal exists. There is no guarantee that a solicitation or contract will result from this market research, and no compensation is provided for participation. The procurement is aligned with NAICS code 333914, with anticipated production quantities of 644 units in FY2029 and 648 units in FY2030, but no contract value, CLIN structure, FOB terms, or payment details are specified, as this is strictly an information-gathering exercise. Offerors are expected to demonstrate technical proficiency in interpreting SolidWorks CAD files, managing engineering changes per EIA-649-1, updating logistics data to SAE-GEIA-00
Acc-Dta

POSTED

about 22 hours ago

DEADLINE

in 20 days
View Details
NAICS: 333914
New
Federal
PUMP UNIT,ROTARY
Solicitation # N0010426QJC00
The contract pertains to the repair of a PUMP UNIT, ROTARY with NSN 7HH 4320 014187111 and part number BXL2-1/2NAFJM1-NHROVA, under a firm fixed price arrangement requiring a bilateral agreement and written contractor acceptance prior to execution. The work must comply with rigorous technical and quality standards including MIL-STD packaging, IUID marking (unless the new unit price is under $5,000), cybersecurity clauses DFARS 252.204-7008 and 252.204-7012, and adherence to the original manufacturer’s specifications and drawings. The contractor is responsible for all repair costs including handling unwholesome, damaged, or incomplete units, with no additional charges for transportation which is covered by the Navy. All repaired items must be inspected and tested to meet performance standards, with records retained for 365 days post-delivery. The contractor must provide a detailed quote including repair and new unit pricing, teardown and evaluation fees, RTAT, throughput constraints, and a breakdown of costs with profit rate, expiring within 180 days. Failure to meet required RTAT will result in mandatory price reductions via reconciliation modification, without limiting the Government’s right to terminate for default. The contract mandates Buy American compliance, Cybersecurity Maturity Model certification, and Small Business Subcontracting Plan adherence, with all work requiring inspection by authorized facilities and documentation of CAGE codes for both repair location and inspection points. Only authorized distributors of the original manufacturer may submit bids, and proof of authorization must accompany the offer. The contract is administered by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, with Bryan D. Crummel as the primary point of contact. It incorporates mandatory clauses on government liability limitation, electronic funds transfer payment, and prohibition of unauthorized subcontracting system administration. The solicitation requires compliance with the Navy’s WFP Assist Module and Wide Area Workflow instructions for invoice submission, and includes special provisions for CAV reporting and defense priority ratings under April 2008 guidelines. The quote must be submitted within 15 days, with delivery expected under a potential delivery order mechanism. The item is subject to MIL-STD-130 marking, strict part substitution controls governed by six defined code categories, and all documents referenced must be accessed via official DOD sources. Contractors must also comply with distribution statements governing
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
Federal
PUMP,ROTARY
Solicitation # N0010426QJB99
The contract pertains to the repair of a rotary pump, NSN 7HH 4320 011881850, with part number SG-4632B, under a firm fixed-price arrangement requiring bilateral acceptance. The contractor must deliver a comprehensive repair quote within 15 days, inclusive of all costs associated with receiving, evaluating, and repairing the unit regardless of its condition, including unwholesome, damaged, or incomplete assemblies. The repair must meet strict technical standards aligned with the original manufacturer’s specifications, drawing references, and applicable military standards such as MIL-STD-130 for marking and MIL-STD-2073 for packaging. The contractor is responsible for inspection and testing in accordance with approved procedures, with records retained for 365 days post-delivery. Delivery must be FOB source, and all shipping to and from the repair site is funded by the Navy. The contract mandates inclusion of teardown and evaluation rates, repair turnaround time (RTAT), and an induction expiration date, with financial penalties applied for missing RTAT targets via post-performance reconciliation modifications. Compliance with cybersecurity requirements under DFARS 252.204-7008 and 252.204-7012 is mandatory, as is adherence to the Buy American Act and the Small Business Subcontracting Plan. The item must be uniquely identified (IUID) unless the new unit price is under $5,000. The contractor must be an authorized distributor of the original manufacturer and provide documentation to prove this status. All quotes must include detailed cost breakdowns, profit rates, repair and new unit pricing, inspection and subcontractor CAGE codes, quote expiration date (180 days preferred), and delivery vehicle specifics. The contract is governed by a fixed-price structure with government liability capped at the obligated amount, and performance is subject to Navy inspection and acceptance. The solicitation is administered by NAVSUP-WSS in Mechanicsburg, PA, with Bryan D. Crummel as the primary point of contact.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 541511
New
DIBBS
Defense Telecommunications Equipment ComplianceThis contract mandates strict compliance with U.S. defense telecommunications equipment regulations, prohibiting the use of any covered equipment or services sourced from entities deemed national security risks, specifically including Huawei and ZTE. All parties involved must ensure that no components, systems, or services derived from these prohibited sources are incorporated into any deliverables or operations under the agreement. The requirement applies to all tiers of subcontracting and extends to the entire lifecycle of the telecommunications infrastructure involved in the project. The contract is issued under the NAICS code 541511, indicating it pertains to custom computer programming services, and is structured as a subcontract within the Department of Defense framework. It was posted on August 3, 2026, with a mandatory response deadline of August 13, 2026. The place of performance and detailed office address are unspecified, but performance is expected to align with the broader objectives of the U.S. defense supply chain. Compliance with these restrictions is mandatory for award consideration, and failure to certify adherence may result in disqualification or contractual penalties. The solicitation is accessible via the DIBBS platform under reference number SPE8EF26Q0157.
Custom Computer Programming Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Certified IT Security SupportThe contract seeks cybersecurity support services to achieve and maintain CMMC Level 2 compliance for systems that handle covered defense information, ensuring adherence to the Department of Defense’s cybersecurity standards. This subcontract is focused on implementing technical and procedural safeguards aligned with CMMC Level 2 requirements, which include secure configuration, access control, audit logging, and incident response measures. The work is intended to strengthen the defense supply chain’s cybersecurity posture by ensuring all relevant systems meet mandatory protection standards for sensitive federal information. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 541512 for computer systems design services. The contracting activity is linked to the Department of Defense under the organization name Construction & Equipment Manu & Con, with performance expected to occur at unspecified locations. Interested parties must respond through the DIBBS platform using the provided RFQ link, and the opportunity does not specify a set-aside designation or additional socioeconomic requirements.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483111
New
DIBBS
U.S.-Flag Vessel Transportation ComplianceAll ocean transportation under this subcontract must be performed using privately owned U.S.-flag commercial vessels, with strict adherence to U.S. flag requirements. Contractors are required to identify and report accurate details for each carrier and vessel involved in the transport, ensuring full compliance with federal regulations governing maritime operations. The contract is issued under NAICS code 483111 and is associated with the Department of Defense through its Construction & Equipment Manu & Con organization, with a response deadline of August 13, 2026, and a posting date of August 3, 2026. No set-aside provisions apply, and performance obligations are tied exclusively to the use of compliant U.S.-flag vessels regardless of origin or destination.
Deep Sea Freight Transportation

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811212
New
DIBBS
Counterfeit Electronic Parts Detection and AvoidanceThe contract requires the implementation and maintenance of a system designed to detect and prevent the introduction of counterfeit electronic components into the supply chain, ensuring the integrity and reliability of all electronic parts used in defense-related applications. This system must be capable of identifying fraudulent, altered, or substandard components at multiple stages of procurement, manufacturing, and distribution, incorporating advanced verification technologies, inspection protocols, and data tracking mechanisms to mitigate risks associated with counterfeit electronics. The solution must be scalable, adaptable to evolving threats, and fully integrated into existing logistics and quality assurance frameworks. This subcontract is issued under the Department of Defense with a NAICS code of 811212, specifying services related to electronic equipment repair and maintenance. The solicitation is open for responses through August 13, 2026, with no set-aside restrictions indicated. Performance is expected to support defense infrastructure nationwide, though no specific location is designated. The contractor must demonstrate technical proficiency in supply chain security, electronic component analysis, and compliance with federal standards for hardware authenticity, ensuring the system remains effective against both current and emerging counterfeiting techniques without disruption to operational timelines or mission readiness.
Computer and Office Machine Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 488999
New
DIBBS
First Destination Transportation CoordinationThis contract requires coordination with government-provided transportation services to ensure the first-destination delivery of cargo, involving the accurate and timely submission of detailed carrier and shipment information. The work is categorized under NAICS code 488999, indicating it relates to other transportation support activities, and is structured as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Manu & Con agency. The opportunity was posted on August 3, 2026, with responses due by August 13, 2026, and performance is expected to support military logistics operations without a specified geographic restriction. All involved parties must adhere to government protocols for transportation coordination and documentation to ensure seamless delivery and compliance.
All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Vendor Shipment Module (VSM) Data SubmissionVendors are required to submit complete and compliant shipment data through the Vendor Shipment Module for all deliveries under this subcontract, including essential documents such as the bill of lading, detailed cargo specifications, and accurate carrier information. This obligation applies to all shipments tied to the contract and must be executed timely and accurately to ensure seamless logistics coordination and regulatory compliance. The solicitation, issued by the Department of Defense under the NAICS code 541512 for computer systems design services, was posted on August 3, 2026, with responses due by August 13, 2026, and performance is tied to the broader construction and equipment manufacturing and contracting framework managed by the agency. All submissions must be made via the designated online portal accessible through the provided DIBBS link to satisfy contractual obligations.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability Documentation ManagementThe contract requires the maintenance and provision of complete supply chain traceability documentation for all delivered items, ensuring strict adherence to DFARS regulations and all specified contract requirements. This obligation encompasses the end-to-end tracking of components and materials, from raw sources through manufacturing and delivery, to guarantee authenticity, integrity, and compliance with federal defense standards. Failure to maintain accurate and accessible documentation could result in noncompliance penalties, delivery rejections, or termination of contractual obligations. This subcontract, issued under the NAICS code 541611 by the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT MANU & CON, is open for response until August 13, 2026. The solicitation is managed through the DIBBS platform and applies to all deliverables under the agreement, regardless of complexity or source. Contractors must ensure systems and processes are in place to support real-time audit readiness and full transparency throughout the supply chain, with no exceptions for subcontracted or third-party contributions.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
SPACER ASSEMBLY, TAIL R
Solicitation # SPE8EF-26-Q-0157
The contract pertains to the procurement of 109 units of a spacer assembly for a tail rotor blade with NSN 1730-01-082-6504, issued under solicitation SPE8EF-26-Q-0157 by the Department of Defense through the Defense Logistics Agency. Delivery is required within 60 days of award, and responses must be submitted by August 13, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and prior authorization from DLA may access the restricted technical data. The contract also requires the seller to be certified by a CMMC Level 2 C3PAO to meet cybersecurity standards. All inquiries should be directed to Russell Keiser at russell.keiser@dla.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326220
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2206
The contract solicits one container length of fibrous rope, equivalent to 200 feet, under NSN 4020-01-577-8748 for delivery within 20 days of award. The procurement is governed by DLA packaging requirements and incorporates technical and quality standards referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Covered defense information may apply, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE8EE-26-T-2206, issued on August 3, 2026, with responses due by August 14, 2026. The NAICS code is 326220, and the contracting agency is the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is required at Fort Bliss, Texas, 79906-0000, with Philip Ferrara as the primary point of contact, reachable via email and phone provided. The procurement is identified as a federal solicitation with no set-aside classification.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333924
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1383
The contract solicitation seeks 271 units of NSN 3990016426693 SKID, PLATFORM to be delivered to DLA DISTRIBUTION RED RIVER within 78 days of award. Only approved sources, identified as 75Q65 and 94231 03159940013, are eligible to respond, though all responsible parties may submit quotes if received on time. The solicitation is issued as an RFQ under number SPE8EF26T1383 with a submission deadline of July 6, 2026, and no hard copies are available—quotes must be submitted electronically via the online portal. Technical specifications, plans, or drawings are not provided, and the procurement is categorized under NAICS code 333924 with no set-aside type designated. The contracting activity is managed by DLA Troop Support under the Department of Defense, based in Philadelphia, Pennsylvania, with all inquiries directed to the designated point of contact via email. The opportunity can be accessed online through the SAM.gov portal using the provided UI link.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
SHIELD, AIRCRAFT GRO
Solicitation # SPE8EF-26-Q-0158
The contract pertains to the procurement of 18 aircraft ground shields under NSN 1730-00-073-5654, with a delivery requirement of 60 days after award. It is issued under solicitation SPE8EF-26-Q-0158 as a total small business set-aside, with responses due by August 12, 2026. The solicitation incorporates technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Strict marking and identification protocols apply, including removal of government identification from non-accepted supplies and bare item marking. Packaging must meet DLA specifications, and all performance occurs within the United States under the Department of Defense. Point of contact for inquiries is Russell Keiser, reachable via the provided email and phone number.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-T-2128
The item is an ADAPTER, HOISTING with NSN 3940-01-643-2398, quantity one, required for delivery within 20 days of award under purchase request 7017554725. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or transfer to foreign persons regardless of location, including foreign national employees and overseas subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and a cleared DLA questionnaire may access the controlled data. The solicitation number is SPE8EE-26-T-2128, posted on July 21, 2026, with responses due by August 3, 2026. Performance is designated for San Diego, CA, 92155-5020, under NAICS code 333923, managed by the Department of Defense through the Construction & Equipment Manu & Con organization. Primary point of contact is Philip Ferrara, reachable at the provided email and phone number.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details