Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

NSAND Gaeta Floating Pier

Active
N6817126QN066Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the removal and replacement of the existing floating pier at Port Operations in Gaeta, Italy, with a new structure that must provide increased harboring capacity for five boat slips, up from the current ability to accommodate four vessels. A critical requirement during the transition is maintaining continuous operational capability to harbor four boats at all times, ensuring no disruption to vessel operations throughout the entire project timeline. The work must be fully completed within Fiscal Year 2026 and is issued under solicitation number N6817126QN066. The solicitation is open to all eligible contractors with no set-aside restrictions and falls under NAICS code 488390 for other water transportation support activities. The solicitation was posted by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office, under the Department of Defense, with the primary point of contact being Ricardo Alberto Lopez, reachable via email. Responses are due by August 17, 2026, and the contract is performance-based at the location in Gaeta, Lazio, Italy. All proposers must refer to the Request for Quotation for additional technical specifications, requirements, and submission guidelines. The office address listed is a FPO, AE, indicating administrative processing through U.S. military postal services.

General Info

Remove and replace Gaeta pier to support five boat slips, maintain four slips operational, complete by FY2026.

Agency

Department Of Defense → Navsup Flc Sigonella Naples OfficeView Agency

NAICS

488390 - Other Support Activities for Water TransportationView NAICS

Place of Performance

Gaeta, IT-62, ITA

Set-Aside

NONE

Documents

(1)

4.02+Solicitation+-+N6817126QN066.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flc Sigonella Naples Office
Contacts1 person available
OfficeFPO, AE, 09622-0050, USA
Organization / Agency
Department Of Defense → Navsup Flc Sigonella Naples Office
View Agency Profile
Office AddressFPO, AE, 09622-0050, USA
Contacts
Ricardo Alberto Lopez

Full Description

Show more

Remove and replace Port Operations floating pier in Gaeta. During removal and installation a capability to harbor 4 boats must be maintained at all times. Work must be completed in FY26. New pier will need an increased harboring capacity of 5 boat slips. Please see the RFQ for more information.

Similar Contracts

Same NAICS industry code

NAICS: 488390
New
DIBBS
Government-Furnished Transportation Coordination (Sea Shipment)The contract entails coordinating the sea shipment of an adapter kit to the USS Gerald R. Ford at FPO AE 09523, adhering strictly to Department of Defense transportation directives and utilizing government-arranged logistics infrastructure. The effort is classified as a subcontract under a Total Small Business Set-Aside as defined by the SBA, ensuring procurement exclusively among small business concerns. The North American Industry Classification System code 488390 indicates the work falls under other support activities for water transportation, emphasizing the specialized nature of the logistical coordination required. All activities must comply with DLA’s operational standards to ensure timely, secure, and compliant delivery to the designated military installation. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, leaving a one-week window for interested small businesses to submit proposals. The contract is managed under the Department of Defense’s Construction & Equipment Manu & Con organization, though specific office details and point of contact information are not provided. Performance is bound to the delivery location at FPO AE 09523, with no other place of performance specified. Interested parties are directed to the official DIBBS portal for full solicitation details and submission procedures, ensuring all responses are submitted through the authorized government procurement system in accordance with federal contracting requirements.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488390
New
Federal
Vessel Transportation and LogisticsThe contract entails the insured round-trip transportation of a government-owned vessel between a contractor facility near Joint Base Charleston, South Carolina, and its designated destination, with all logistics managed under strict compliance and safety protocols. The work is subject to a Total Small Business Set-Aside, meaning only small business concerns are eligible to compete, as defined by the SBA under FAR 19.5, ensuring opportunities for qualified small businesses within the defense supply chain. The North American Industry Classification System code 488390 applies, classifying the service within support activities for water transportation, specifically encompassing vessel transport and related logistics operations. Performance is required at Charleston AFB with a zip code of 29404, and the solicitation is open under the Department of Defense’s FA4418 628 Cons Pk office. The opportunity was posted on July 28, 2026, and responses are due by August 12, 2026, at 4:00 PM Eastern Time. The contract is structured as a subcontract and mandates comprehensive insurance coverage for the vessel during transit, including protection against loss, damage, or delay during both outbound and return movements. All transportation must adhere to federal regulations and defense-specific security standards, with the contractor fully responsible for planning, scheduling, and executing secure and timely vessel movement to and from the specified location.
FA4418 628 Cons Pk

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 488390
New
Federal
Final Assembly, Testing, and CommissioningThe contract pertains to the final assembly, functional testing, and commissioning of an airboat and trailer system, requiring full integration and validation through ice, water, and load testing to ensure operational readiness. All quality assurance protocols must be rigorously followed to meet established performance standards prior to delivery, with the end goal of delivering a fully functional, mission-capable system. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the intent to support small business participation in federal contracting. The North American Industry Classification System code 488390 indicates this relates to other services related to water transportation, aligning the scope with specialized marine equipment integration and support. The solicitation was posted on July 27, 2026, with a response deadline of August 7, 2026, providing a three-week window for interested parties to submit proposals. The contracting authority is Sat Team 2 Fws under the Department of the Interior, though no specific office address or point of contact is provided. Performance of the work is not geographically specified, allowing flexibility in execution location as long as deliverables meet contractual requirements. The contract does not include a solicitation number, suggesting it may be internally managed or part of a broader framework. Access to the opportunity is available via a SAM.gov link, where detailed technical specifications and submission instructions can be obtained directly by potential bidders.
Sat Team 2 Fws

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 488390
New
DIBBS
Domestic and International Shipping Compliance (U.S.-Flag Vessel Certification)The contract requires comprehensive documentation and certification to ensure compliance with U.S. ocean transport regulations, specifically focusing on the use of U.S.-flag vessels or the acquisition of a MARAD waiver when such use is not feasible. Successful bidders must demonstrate full adherence to applicable maritime laws and provide verifiable evidence of vessel flag status or approved waivers, ensuring legal and regulatory alignment for both domestic and international shipping operations under the Department of Defense’s oversight. The performance location is designated as JB MDL with a zip code of 08641-5500, and the work falls under NAICS code 488390 for other support activities for water transportation. This is a subcontract opportunity posted by the ASC Commodities Division of the Department of Defense, with a response deadline of July 31, 2026. The solicitation is open for submission through the DIBBS platform, and all applicants must be prepared to meet stringent compliance standards related to maritime transport. There is no specified set-aside type, meaning the contract is open to all qualified entities regardless of business size or status, and the primary objective is to secure reliable, auditable proof of compliance to facilitate lawful cargo movement under U.S. flag or authorized exceptions.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Navsup Flc Sigonella Naples Office

Same awarding agency

NAICS: 336611
New
Federal
USNS SHIP Voyage Repair AvailabilityThis solicitation, numbered N6817126QN053, issued by the Navy Supply Systems Command Fleet Logistics Center Sigonella Naples Office, seeks firm-fixed-price quotations for voyage repairs on a United States Navy ship, to be conducted at either Bar, Montenegro or Taranto, Italy. The exact location will be determined prior to award, and only one location will be selected—offerors must submit pricing for one or both options, with the final contract awarded based on a Lowest Priced Technically Acceptable (LPTA) evaluation method. Technical capability is assessed first as a binary pass/fail criterion under the "Acceptable" or "Unacceptable" rating system; only technically acceptable offers proceed to price evaluation, where the lowest total evaluated price wins, with no trade-offs permitted. The work scope, detailed in Attachment J-2 and referenced in General Technical Requirements and applicable regulatory standards such as ABS and USCG, includes repairs to lifeboats, anchor windlasses, davits, ladders, and other vessel components, along with inspections, testing, and documentation submission. All work must comply with commercial and maritime standards, utilize certified personnel for welding and nondestructive testing, and ensure proper preservation and packaging of government-furnished material. The contract requires full compliance with Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including payment terms governed by Wide Area WorkFlow (WAWF), cybersecurity safeguards under DFARS 252.204-7012 and 252.204-7020, and prohibitions against influencing federal transactions or mandating confidentiality agreements. Offerors must submit completed representations, certifications, and supporting documents including quality manuals, welding and NDT certifications, marine chemist credentials, and a test and inspection plan. Proposals must be submitted electronically via email to designated contracting personnel by the deadline of August 5, 2026, at 1:00 PM CET, with no hard copy submissions accepted. The period of performance is strictly defined as September 29 to October 13, 2026, under FOB Destination terms, and acceptance will occur at the performance site by the Office of the Military Sealift Command Representative. The contract explicitly excludes small business set-asides, but includes provisions ensuring accelerated payments to small business subcontractors. Contractors are responsible for all preservation, labeling, and repair of government equipment, and must maintain test and inspection records for
Ship Building and Repairing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 337211
New
Federal
FURNITURE FOR NAVAL STATION (NAVSTA) ROTA, SPAINThe U.S. government, through the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office, is preparing to procure furniture for the Housing Department at Naval Station Rota, Spain, under a pre-solicitation notice dated July 28, 2026. The requirement includes a comprehensive list of commercial furniture items such as double and single beds with box springs and mattresses, computer and dining chairs, sofas, loveseats, desks, dressers, chests, lamps, coffee and end tables, and nightstands. The contract will be awarded on a Firm Fixed-Price basis, with delivery required at the specified location in Rota, Spain, within 45 days of award. This procurement is classified as a commercial acquisition below the Simplified Acquisition Threshold and will follow streamlined procedures under FAR Part 12, with the government planning to solicit quotes directly from at least three qualified vendors without issuing a public solicitation. No formal solicitation document is currently available, and the notice serves solely for market research and planning purposes. Responses to this notice are not bids or proposals but are being collected for informational use only, with any submissions received within five working days of posting retained for future acquisition planning. The NAICS code for this requirement is 337211, and the action carries no set-aside designation. The point of contact for inquiries is Javier Soria, reachable via email through SAM.gov, and while the posting references a response deadline of August 12, 2026, this date does not indicate a formal submission window, as no solicitation exists at this time. Delivery will be made to a physical location in Cadiz, Spain, with the contract office based in FPO, AE. The acquisition is strictly for commercial furniture, and the government will not accept capability statements or competitive bids at this stage.
Wood Office Furniture Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335220
New
Federal
TRANSFORMERS FOR NAVAL STATION (NAVSTA) ROTA, SPAINThe U.S. Government, through the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office, is preparing to procure twenty-seven 2000-watt and ten 1000-watt step-up and step-down transformers for use at Naval Station Rota, Spain. This pre-solicitation notice serves only as an informational preview and is not a formal request for proposals or quotes. The requirement qualifies as a commercial product under the Simplified Acquisition Threshold and will be procured using streamlined procedures outlined in FAR Part 12, with the Government planning to request competitive quotes from at least three pre-screened sources without issuing a public solicitation. Delivery is expected within 45 days of contract award on a Firm Fixed-Price basis, with the contractor responsible for all logistics to the designated location at NAVSTA Rota. The NAICS code for this procurement is 335220, and no small business set-aside is planned. All responses received within five working days of the posting date will be used solely for market research purposes. The official solicitation number is N6817126QT031, posted on July 28, 2026, with a response deadline of August 12, 2026. While the notice indicates interest in receiving supplier information ahead of formal acquisition, no solicitation document is currently available. Inquiries should be directed to the primary point of contact, Javier Soria, at javier.b.soria.civ@us.navy.mil. The contracting office is located in FPO, AE, and the end-use location is in Cadiz, Spain, with a zip code of 11520. This action is classified as a pre-solicitation, and no binding commitment or obligation has been created by this notice.
Major Household Appliance Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
VOYAGE REPAIR (VR)The contract solicitation VOYAGE REPAIR (VR), designated N6817126QN067, is for emergency ship repair services for the USS ROSS (DDG 71) in Mombasa, Kenya, scheduled for August 15–19, 2026. It is a Firm Fixed Price (FFP) acquisition under simplified procedures using the Lowest Priced Technically Acceptable (LPTA) source selection method, where technical acceptability serves as a threshold criterion and price is the sole factor for award among qualifying offerors. The base contract value is listed as $0, likely a placeholder, while an optional line item for additional work is priced at $4,000, making the total potential contract value up to $4,000. The scope of work is defined by Attachment J-2, the Statement of Work, which mandates execution of specific maintenance tasks including valve inspections, crane services, and adherence to NAVSEA and SSPC standards for coating, welding, and non-destructive testing, all to be completed within the five-day window. All work must comply with environmental, safety, and quality control regulations, including confinement entry and fire protection protocols tied to Navy standards. The contract incorporates a comprehensive set of FAR and DFARS clauses governing performance, compliance, and administration. Key requirements include safeguarding covered defense information under DFARS 252.204-7012, adherence to cybersecurity and cyber incident reporting protocols, prohibitions on payments to influence federal transactions and contracting with inverted domestic corporations, and mandatory compliance with local labor laws and occupational safety in Kenya. Contractors must maintain active System for Award Management (SAM) registration and are required to submit all invoices electronically via Wide Area WorkFlow (WAWF) using approved formats such as Invoice 2in1. Acceptance occurs at the place of performance in Mombasa through joint inspection by the contractor and the government’s designated representative, with final authority resting with the Navy. The contracting officer, Joseph Norcross, serves as the primary point of contact, while the technical representative and COR are to be assigned post-award. All offerors must submit complete representations, including UEI and CAGE codes if providing covered telecommunications equipment, and self-certify small business status where applicable. Packaging, marking, and preservation requirements are neither specified nor referenced beyond coating adherence to NAVSEA-approved procedures, and no MIL-STD standards for logistics are cited. The solicitation response deadline is
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 336611
New
Federal
USS MTW FY27 MID-TERM AVAILABILITY (MTA)The U.S. Navy is seeking contractors for the FY 2027 Mid-Term Availability (MTA) of the USS Mount Whitney (USS MTW), solicited under N6817126RN006 with a response deadline of August 3, 2026. The contract, issued by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office, requires all work to be performed at a pier-side facility located within the Mediterranean basin or the European Atlantic coastline, encompassing the United Kingdom, Ireland, the Netherlands, Belgium, France, Spain, Portugal, and the Atlantic coast of Germany. The period of performance is strictly defined as January 12 through March 13, 2027, with the contractor responsible for securing continuous base and pier access throughout this timeframe. All personnel must be included in a Ships Access List submitted 96 hours prior to the start of the availability, and inspections and tests must be coordinated with the MSCREP and ABS Surveyor at least 24 hours in advance. The scope of work is defined by a comprehensive work package that includes labor, materials, and equipment to complete a range of maintenance, overhaul, and repair tasks. Key deliverables include operational testing and reporting of deck drains, calibration of gauges and instruments per ANSI and ISO standards, inspection and servicing of the Vessel Control System by authorized OEM representatives, repair of fire doors and shutters in compliance with NFPA, SOLAS, and ABS regulations, and full logistics documentation such as technical manuals, repair parts support, and residual asset files. All equipment must be marked with manufacturer plates, safe working load and vehicle weight labels, fuel type indicators, and certification plates from accredited laboratories such as UL or FM. Label plates must be constructed of stainless steel CRES 316/316L, and all hull and deck markings must be meticulously recorded prior to coating and fully restored to original specifications following surface renewal. The contract structure includes a base award of $50,500 for standard work items, contingent optional work items, a 20,000-hour Anticipated Growth Requirements (AGR) labor line, and daily rates for extended services. The total estimated contract value is $1,050,500. Contractor personnel must comply with strict safety requirements, including fall protection for any work at four feet or higher, adherence to lock-out/tag-out procedures per 29 CFR 1910.14
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 5 days
View Details