Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

NSN 2840016873807PR, F110 CASE AND VANE ASSEM (AMC: 3R)

Active

SPRTA1-26-R-0366Federal

Response Deadline09/14/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified by number SPRTA1-26-R-0366, is issued by the Department of Defense through the DLA Aviation office located at Tinker AFB, Oklahoma. The contract is for the procurement of F110 Case and Vane Assemblies, associated with National Stock Number 2840016873807PR. The requirement falls under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing. The opportunity was posted on August 13, 2026, with a response deadline set for September 14, 2026. There are no specific set-asides applied to this solicitation. Interested parties should refer to the presolicitation and attached solicitation documents for full technical details and coordinate with the primary point of contact, Breann Irving, for further inquiries.

General Info

Procurement of F110 engine CASE AND VANE ASSEM via sole-source contract, delivery by March 31, 2027, via RFP SPRTA1-26-R-0366.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(1)

Solicitation+SPRTA1-26-R-0366.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 28

Presolicitation

Type ChangedAug 13

Presolicitation → Solicitation

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 09:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

Breann Irving

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

See presolicitation and attached solciitation for full details.

Similar Contracts

Same NAICS industry code

Supply of Aircraft Structural Panels (P/N 1560-01-618-5240)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Aircraft Wing Parts Kit Manufacturing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Supply of Aircraft Fuel Filter (Part Number: 7017880397)This subcontract involves the supply and delivery of one military-spec aircraft fuel filter, specifically part number 7017880397. The item must be delivered in accordance with MIL-STD-129 packaging and marking standards and must be accompanied by all necessary technical documentation. The contract is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with the place of performance located in Cherry Point, zip code 28533-0021. The procurement falls under NAICS code 336412, with a response deadline set for August 21, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 17 hours ago

DEADLINE

DISPENSER, WATER

Solicitation # SPE4A5-26-T-355V

This contract is a solicitation from the Department of Defense, specifically the ASC Supplier OEM Division, for the procurement of 21 water dispensers under part number 4920-01-151-0741. The delivery requirement is set for 167 days after the order date. The procurement is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for packaging and the removal of government identification from any non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The contract contains strict regulations regarding covered defense information and the export control of technical data under ITAR and EAR guidelines. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

VALVE, SUBASSY, POPPE

Solicitation # SPE4A7-26-T-652E

This contract is for the procurement of 59 units of a poppet valve sub-assembly, identified by NSN 2915009108392 and part numbers CFRB15985 or RB15985. The order is designated as a critical application item and is subject to Covered Defense Information and CMMC Level 2 self-assessment requirements. Delivery is required within 85 days, with a need ship date of November 15, 2026, and an original required delivery date of January 17, 2027. The agreement specifies that inspection and acceptance will occur at the origin. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with final delivery directed to the DLA Distribution New Cumberland facility in Pennsylvania.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

LEVER, SPEED SET

Solicitation # SPE4A7-26-T-651Z

This contract is for the procurement of four speed set levers, identified by NSN 2915-01-089-41417 and Hamilton Sundstrand part number 763544-2. The items are designated as critical application items and must be delivered within five days of the order. Shipping and delivery are set as FOB Origin, with the final destination being the Poland FMS Consolidation point in Huntsville, Alabama. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and MIL-STD-129 for marking. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Additionally, the contract incorporates various DLA master list requirements regarding measuring and test equipment and source approval documentation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

FACING, PROPELLER BR

Solicitation # SPE4A5-26-T-352Z

This solicitation is for the procurement of 16 propeller facings under solicitation number SPE4A5-26-T-352Z, with a delivery requirement of 109 days after order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must provide details of current dealer or distributor certifications. Those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to maintain communication with the buyer. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must submit specific representations and certifications. Additionally, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

SCREW ASSEMBLY, PANEL

Solicitation # SPE4A6-26-T-16NV

This contract is for the procurement of 587 units of panel screw assemblies, identified by NSN 5305-01-620-5059. The items are classified as critical application items and must be manufactured according to specific technical drawings and the DLA Master List of Technical and Quality Requirements. Delivery is required within 148 days, with a need ship date of January 17, 2027, and a final required delivery date of April 19, 2027. The agreement mandates strict quality control and sampling standards, adhering to MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. The items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

SEAL, METALLIC, AIRCR

Solicitation # SPE4A5-26-T-355M

This contract is for the procurement of 42 metallic seals for aircraft gas turbine engines, identified as General Electric Company part number L22138P02 and NSN 2840-01-457-8168. The item is classified as a commercial critical application item. Delivery is required within 169 days, with a need ship date of February 7, 2027, and an original required delivery date of December 8, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and sampling standards such as MIL-STD-1916 and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases defined by NAVSEA. Quality assurance involves zero-based sampling plans, and the contractor must comply with source approval and measurement equipment standards.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

RETAINER, SPRING, FUE

Solicitation # SPE4A6-26-T-16XV

This contract is for the procurement of 11 fuel valve spring retainers, identified by NSN 2915006734874 and part number 329451. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California. The delivery timeline is set for 169 days after the order, with a required delivery date of March 28, 2027. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, Covered Defense Information requirements, and DLA packaging and marking specifications. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific request.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BOLT, CAM ADJUSTING

Solicitation # SPE4A5-26-T-352W

This solicitation is for the procurement of 20 cam adjusting bolts under solicitation number SPE4A5-26-T-352W for the Department of Defense. The delivery requirement is 85 days after the order is placed. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and should use the DIBBS system to submit no bid responses if they intend to quote after the closing date to avoid unnecessary follow-up calls. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must provide specific representations and certifications. Additionally, all contractors must prepare for a transition to the Account Management and Provisioning System for VSM access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

Precision Repair of Aircraft Fairing (Composite/Metallic Structure)

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Preservation, Packaging, and Shipping to DoD Standards

Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

Inspection, Testing, and Quality Assurance Services

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Engineering Data Acquisition and Compliance Support

Engineering Services

POSTED

about 22 hours ago

DEADLINE

New Manufacture of Fluid Filter Body (AE-B217-162) for B-1 Aircraft

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

VANE SEGMENT, COMPRE_End_Item_F100_NSN_2840016197379NZ_PN_4089078-03

Solicitation # FD20302700214

The Department of the Air Force, specifically the 421st SCMS at Tinker Air Force Base, is conducting market research through a Sources Sought notice to identify potential providers for the procurement of Vane Segment, Compre spares. This requirement is for the F100 platform, specifically part number 4089078-03 and NSN 2840-01-619-7379NZ. The scope involves the new manufacture of components, including all necessary labor, materials, testing, and shipping, and is strictly for new spares rather than repair services. This effort is categorized under NAICS code 336412 and is open to all business types, including large businesses and various small business designations. Interested sources must respond by August 20, 2026. This notice is for planning purposes to determine the acquisition strategy and does not constitute a formal solicitation or a contractual commitment.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

F110 ROTOR,COMPRESSOR,AI, NSN: 2840-01-527-6505 PR (AMC 3V)

Solicitation # SPRTA1-26-R-0385

The Government is seeking a rotor compressor assembly designated for use in the F110 engine, identified by NSN 2840-01-527-6505 PR and part number 2214M14G01, with an estimated requirement of 23 units. The solicitation, numbered SPRTA1-26-R-0385, is scheduled to be issued on August 13, 2026, with responses due by September 14, 2026, and delivery is required by September 31, 2027, to location SW3211. This procurement is being conducted under FAR 6.302 as a sole source action, as GE Aviation is currently the only known supplier capable of meeting the technical requirements, and no competition is anticipated unless responses to the notice indicate otherwise. Electronic procedures are mandatory, and all communications must be submitted in writing or via fax; telephone inquiries are not accepted. The acquisition does not follow commercial item procedures under FAR Part 12, though offerors with commercial item capabilities may still submit their interest within fifteen days of the notice. An ombudsman is available to address concerns from potential offerors during the proposal phase, ensuring confidential communication without influencing evaluation or selection. All inquiries should be directed to Breann Irving via email or phone, and solicitation documents will be accessible through sam.gov on the release date.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Servovalve, Hydraulic

Solicitation # SPRTA1-26-R-0037

This acquisition seeks hydraulic servovalves, NSN 1650-00-609-8372, part number 5-97213-2, for use on KC-135 aircraft, with specifications including dimensions of 11.0 inches in length by 5.0 inches in width and height, weighing 5.45 pounds, and composed of steel, aluminum, Teflon, and synthetic rubber, used to control flap and spoiler movement. The contract includes six line items: 26 primary servovalves, two functional assembly units, one expended functional assembly unit, and one lot each of a FA Test Report, Material of Certification, and Certificate of Compliance, all to be delivered by or before August 1, 2027, or February 1, 2027, depending on the line item, with documentation requirements aligned to DD Form 1423-1 (CDRL) and Form 260. Delivery destinations are specified for each line item, including SW3210, FY2303, and FA8111, with UID marking mandatory for all items. Only manufacturers who have successfully completed all testing mandated by the original design authority or equivalent testing approved by the government per the JACG Aviation SAM Handbook are eligible to compete, and only a limited number of pre-qualified sources, including Sargent Controls, Keeley Aerospace, Circor Aerospace, Parker-Hannifin, Woodward HRT, Triumph Actuation Systems, and The Boeing Company, are recognized. Contractors must hold valid EXPORT CONTROLLED certification via the DLA JCP portal to access technical drawings and engineering data via sam.gov, with no surplus items permitted. The acquisition is not set aside for small businesses and will be awarded under FAR 6.302 due to the limited availability of qualified sources. Proposal submission is electronic via sam.gov, with a final deadline of June 18, 2026, at 4:00 pm Central Time. Price and past performance will jointly determine award, and the government's obligation is contingent on congressional funding availability. A designated Ombudsman is available for contractor concerns during the proposal phase, and firms are advised to contact the original equipment manufacturer for data rights prior to submission.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

FILTER BODY, FLUID_End_Item_B-1_NSN_1650012046227_PN_AE-B217-162

Solicitation # FD20302700212

The Department of the Air Force, specifically the 423rd SCMS at Tinker Air Force Base, is conducting market research through a Sources Sought Synopsis to identify potential providers for the procurement of fluid filter bodies for the B-1 platform. The requirement involves the new manufacture of 12 units under part number AE-B217-162 and NSN 1650-01-204-6227. This effort is strictly for a new spares buy and does not include repair requirements. The government is seeking information from all business types, including large and various small business designations, under NAICS code 336413. Selected sources will be responsible for providing all labor, materials, and equipment necessary for manufacture, inspection, testing, and shipping. This is not a formal solicitation or a request for proposal, and the information gathered will be used to determine the final acquisition strategy. Responses are due by August 20, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

HUB, COMPRESSOR NUT_End_Item_F100_NSN_2840012070041NZ_PN_4060942

Solicitation # FD20302700213

The Department of the Air Force, through the 421st SCMS at Tinker AFB, is conducting market research via a Sources Sought notice to identify potential suppliers for the procurement of compressor nut hubs for the F100 platform. This effort focuses on the manufacture of part number 4060942, identified by NSN 2840-01-207-0041NZ, with an estimated spares requirement date of September 1, 2029. The scope includes all labor, materials, and equipment necessary for new manufacture, inspection, testing, and shipping, as well as potential supply chain management and nonrecurring engineering costs. Classified under NAICS code 336412, the government is seeking interest from all business types, including large businesses and various small business designations. This is not a formal solicitation or a request for proposals, but rather a research effort to determine the best acquisition strategy and evaluate if the requirement can be a small business set-aside. Interested parties must notify the 421st SCMS to be considered participants in this market research effort.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

NEW MANUFACTURE OF VALVE,LINEAR,DIRECT

Solicitation # SPRTA126Q0427

The Department of Defense, through the DLA Aviation office at Tinker AFB, Oklahoma, has issued solicitation SPRTA126Q0427 for the new manufacture of linear direct valves. This procurement falls under NAICS code 336413 and is open to all qualified bidders as there is no specific set-aside designation for this requirement. Interested parties must submit their responses by September 14, 2026, at 4:59 PM. The primary point of contact for this solicitation is Sara Johnnie.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Military Shipping Services

Other Warehousing and Storage

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality Inspection Services

Testing Laboratories and Services

POSTED

DEADLINE