Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NSN 2915-004499118,

Active
SPE4A726R0767Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency Aviation is conducting market research to determine if other companies can manufacture or legitimately obtain the stator assembly, pump, identified by NSN 2915-004499118, currently supplied by Skurka Aerospace Inc, Hydro-Aire Aerospace Corp, and New Phoenix Aerospace Inc. This notice is purely informational and does not constitute a solicitation, request for proposal, or any obligation by the government to award a contract. No funds are available to cover the cost of preparing responses, and submissions are entirely voluntary. Companies wishing to be considered as potential approved sources must submit a SAR drop-off request via email to DLAAVNSMALLBUS@DLA.MIL with the subject line “REQUEST SAR DROP-OFF,” including a point of contact email, the NSN, and a CAGE code. Alternatively, interested parties may contact Ryan Loeffelholz at ryan.loeffelholz@dla.mil for informational purposes. All responses must be received by August 15, 2026, at 6:00 AM Eastern Standard Time. The activity is centered at DLA Aviation in Richmond, Virginia, and the notice was posted on August 10, 2026, under solicitation number SPE4A726R0767.

General Info

DLA seeks potential suppliers for NSN 2915-004499118 stator assembly by August 15, 2026, via email submission.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

Richmond, VA, 23297, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
Ryan Loeffelholz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

DEFENSE LOGISTICS AGENCY (DLA) AVIATION IS ISSUING THIS SOURCES SOUGHT NOTICE AS MEANS OF CONDUCTING MARKET RESEARCH TO DETERMINE IF OTHER COMPANIES ARE CAPABLE OF MANUFACTURING (OR LEGITIMATELY OBTAINING) THE FOLLOWING ITEM: 


NSN 2915-004499118, STATOR ASSEMBLY, PUMP. THIS ITEM IS CURRENTLY MANUFACTURED BY: 


SKURKA AEROSPACE INC 95270 P/N 2556-B5427   
HYDRO-AIRE AEROSPACE CORP 81982 P/N 78-07169 
NEW PHOENIX AEROSPACE INC 3XMD9 P/N 900-0001  


THERE IS NO SOLICITATION AT THIS TIME. THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY.  THIS IS NOT A REQUEST FOR AN OFFER.  THIS DOES NOT CONSTITUTE AS A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT.  RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT.  NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT.  ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.


IF YOUR COMPANY DESIRES TO BE REVIEWED AND QUALIFIED AS AN “APPROVED SOURCE” FOR THIS ITEM, CONTACT THE DLA AVIATION SMALL BUSINESS OFFICE BY SENDING A SAR DROP OFF REQUEST TO EMAIL: DLAAVNSMALLBUS@DLA.MIL   IN THE SUBJECT OF THE EMAIL INDICATE “REQUEST SAR DROP-OFF,” A POINT OF CONTACT EMAIL ADDRESS, NSN, AND A CAGE CODE IN THE BODY OF THE EMAIL. 


IN ADDITION, INTERESTED PARTIES WHO WANT TO BECOME AN APPROVE SOURCE CAN ALSO NOTIFY THE BUYER FOR INFORMATIONAL PURPOSES AT  RYAN.LOEFFELHOLZ@DLA.MIL.  RESPONSES TO THIS SOURCES SOUGHT NOTICE MUST BE RECEIVED BY AUGUST 15, 2026, AT 6:00 AM EASTERN STANDARD TIME. 
 

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-Q-1344
The contract is for the procurement of three wearing rings identified by NSN 4320-01-505-0957 under solicitation SPE7M1-26-Q-1344, with a firm fixed price and zero variance allowance for quantity. Delivery is required within 30 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes. Packaging must use approved materials and methods including drying, protective wrap, and a designated unit container, and palletization must follow DLA standards. The shipment is to be delivered to DLA Distribution San Joaquin in Tracy, California, with transportation governed by specific DLA procedural notes. The contract prohibits intentional addition or direct contact of mercury or mercury compounds unless exempted for functional uses such as batteries, fluorescent lamps, or weapon system components, which must include secondary containment as specified by NAVSEA 5100-003D. Sourcing may require casting or forging, and if government tooling is not available, suppliers must submit a casting and forging assistance request. The item is part of a larger procurement under the Department of Defense, managed by the Maritime Supply Chain, with a primary point of contact at DLA and a mandatory response deadline in August 2026.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-T-270P
The contract solicits twenty undersize composite material wearing rings identified by NSN 4320-01-498-1866 and part number CIRCOR NAVAL SOLUTIONS LLC 63857 P/N 0654C0680S902A, with mandatory sourcing from an approved manufacturer and approved materials as specified on the referenced technical drawing. The item must be mercury free and comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including tailored higher-level contract quality provisions, configuration change management procedures, removal of government identification from non-accepted supplies, DLA packaging standards, and measuring and test equipment criteria. Inspection and acceptance are required at the destination and at the actual manufacturing facility, with technical inspection mandatory and count, kind, and condition inspections explicitly prohibited. The contractor must make all drawings and technical data available for verification and implement an inspection system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with verification levels or AQLs assigned per critical, major, or minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific preservation, unit container, and palletization codes applied. Hazardous materials must be labeled per the Hazard Communication Standard unless otherwise exempted under specified federal acts, and all items must be free of hexavalent chromium and mercury. The solicitation mandates electronic invoicing via WAWF and compliance with extensive cybersecurity and information safeguarding requirements, including NIST SP 800-171 assessments, safeguarding covered defense information, cyber incident reporting, and prohibitions on covered telecommunications equipment. Offerors must provide representations regarding compensation of former DoD officials, whistleblower rights, trafficking in persons, employment eligibility verification, sustainable products, and exclusion from federal awards for entities providing prohibited telecommunications equipment. The contract includes provisions for government delay of work, electronic payment submissions, levies on payments, accelerated payments to small business subcontractors, and restrictions on mandatory arbitration agreements. Delivery is required within 262 days after contract award, and quotations must be submitted via the DLA-BSM Bid Board System by the deadline of August 21, 2026. Although the solicitation
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
PUMP, FUEL, ELECTRICAL
Solicitation # SPE7L3-26-Q-1270
The contract specifies the procurement of one electrical fuel pump with NATO Stock Number 2910-01-595-9022 and part number 4941173 under solicitation SPE7L3-26-Q-1270, issued by the Department of Defense through the Defense Logistics Agency. The item is priced on a firm fixed price basis with no variance allowed in quantity, and delivery is required within 90 days after award. Inspection and acceptance occur at the destination, with freight terms originating from the supplier’s location. All packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA’s RP001 packaging requirements, with the DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The unit of issue is each, and the item is to be shipped to a military facility at Prince Sultan Air Base, Saudi Arabia, as indicated by the shipping and marking address W8000V. The contract incorporates all applicable technical and quality specifications from the DLA Master List, identified by R or I numbers, and mandates the removal of any government identification from non-accepted supplies. Transportation and shipment details are governed by DLAD PROC NOTES C19 and C20, with the RDD designation 999/NMCS and a projected shipment date of July 14, 2026. The purchase request number is 7017710740, and the contracting office is the Land Supplier Operations Vehicle Support under the Department of Defense. Point of contact for the solicitation is Lee Miller, with the official response deadline set for August 25, 2026, and the solicitation posted on August 10, 2026. All packaging, labeling, and documentation must strictly adhere to DLA standards, including correct unit of issue and quantity per unit pack as specified in the contract.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333996
New
Federal
Pump Unit, Hydraulic
Solicitation # SPRDL1-26-R-A001
The solicitation SPRDL1-26-R-A001 seeks Pump Units, Hydraulic with NSN 4320-01-432-6208 and USG PN 12395352 under a Firm Fixed Price, 5-Year Indefinite Delivery Indefinite Quantity contract, with a 100% Small Business Set-Aside. The minimum order quantity is 21 units and the maximum is 406, with the first delivery order anticipated at 65 units, delivered in 330 days if First Article Testing is required or 240 days without it. Delivery is FOB Destination within CONUS, and the unit of issue is each. The contract includes requirements for Pretreatment and CARC-painted material, application of MIL STD-1916, and adherence to higher-level contract quality standards per 52.246-11. First Article Testing is mandatory unless a waiver is formally requested and approved. Range pricing is permitted, and offerors must submit quantity ranges and corresponding unit prices for each ordering year CLIN. Access to technical data is restricted and requires certification under the United States/Canada Joint Certification Program, with DD Form 2345 submitted by mail along with supporting documentation. Contractors must also register on SAM.gov to gain access to the technical data package. While a reverse auction is not required, the solicitation includes provision 52.215-9023, allowing the contracting officer to opt for a reverse auction after submission closing, requiring prior registration and online training through the DLA ProcureX system. The solicitation is posted as a presolicitation with a response deadline of August 25, 2026, and all bids must be submitted by responsible sources. Point of contact for inquiries is Sabrina Krafft of the Department of Defense, DLA Land Warren, located in Warren, Michigan.
DLA Land Warren

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333996
New
Federal
Detroit Powerhouse Transformer Oil Pumps and Motors Purchase
Solicitation # W9127N26QA135
The U.S. Army Corps of Engineers, Portland District, is soliciting twelve centrifugal pump and induction motor units to replace aging oil circulation pumps at the Detroit Powerhouse in Mill City, Oregon. This procurement, identified as solicitation W9127N26QA135, is issued as a combined synopsis and solicitation under FAR Part 12 for commercial items and is structured as a 100% small business set-aside under NAICS code 333996, with a size standard of 1,250 employees. All offerors must be registered in SAM.gov and provide a valid Unique Entity Identifier (UEI) and CAGE code to be eligible for award. The pumps must replicate the original Allis Chalmers XGHT units in performance and configuration, delivering 160 GPM at 3,500 RPM, operating on 460–480V, 3-phase, 60 Hz, with continuous duty ratings and designed for ambient temperatures between 0°C and 40°C. Material requirements include Viton elastomers, Buna N gaskets, and class 30 cast iron, with all components sealed and dynamically balanced. Technical documentation, including fully detailed shop drawings, performance test data, and specifications aligned with the attached transformer drawing, must be submitted and approved prior to award. Quotes must be submitted via email by 4:30 PM PST on August 13, 2026, and are required to include contractor name, UEI, CAGE code, payment term confirmation (net 30), point of contact, lead time, and an expiration date at least 30 days after the closing date. The price must be firm fixed and include FOB destination terms—meaning the contractor bears all shipping and transportation costs to Detroit Dam, located at 40990 Highway 22, Mill City, OR 97360. Deliveries are restricted to Mondays through Thursdays between 0700 and 1600, excluding federal holidays, and must be completed no later than December 16, 2026. Final acceptance occurs at the delivery site, where the government will inspect and verify compliance against technical specifications and performance test results. All items must be labeled in accordance with MIL-STD-129 and MIL-STD-130, including unique item identifiers marked via Data Matrix symbology compliant with
W071 Endist Portland

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M4-26-T-326R
The contract is for the procurement of 19 wearing rings, specifically case rings used on the Warren Model 4TDHA6 centrifugal pump, with the NSN 4320-01-050-9214 and part number 654B0312D040A from Circor Naval Solutions LLC. The item is classified as a critical application item and must comply with all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. The product must be manufactured in accordance with a quality system that meets at least SAE AS9003 or ISO 9001 tailored to SAE AS9003, and all packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, with specific packaging parameters including QUP 001, pres method 31, and unit container E6. Palletization must follow DLA Packaging Requirements for Procurement RP001, and no mercury or mercury-containing compounds may be intentionally introduced, except for functional uses in batteries, fluorescent lights, sensors, or controls as specified by NAVSEA per NAVSEA 5100-003D. Mercury-containing portable fluorescent lamps and instruments must have shock-proof construction and a secondary containment boundary. The contract requires compliance with numerous FAR and DFARS clauses covering cybersecurity, whistleblower rights, conflict of interest, toxic substance prohibitions, export controls, small business representation, and electronic payment submission through WAWF. The item is to be delivered FOB origin within 165 days of award, with a need ship date of February 2, 2027 and original delivery date of August 19, 2027, to the designated receiving warehouse in Tracy, California. Inspection and acceptance occur at destination, and the offeror must submit Safety Data Sheets prior to award to avoid disqualification. The solicitation is for a simplified acquisition and may be awarded automatically unless first article test requirements are present. All submissions must be made through DIBBS by August 20, 2026, and offerors are encouraged to provide quantity ranges to facilitate potential requirement consolidation. The contracting office is the DLA Land and Maritime Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
ROTOR, PUMP
Solicitation # SPE7M1-26-T-268W
The contract solicits 19 units of a Rotor, Pump identified by NSN 4320-01-647-5811, manufactured strictly in accordance with Navy Drawing Number 8595158 Revision A dated June 11, 2019, with the part number identical to the drawing number. The item must comply with all technical and quality requirements enumerated in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and conform to the Technical Data Package Rev A Gen 1. The procurement prohibits the use or incorporation of any Class I Ozone Depleting Chemicals, overriding any conflicting specification requirements, and mandates that alternative chemicals be approved prior to use. The item must also adhere to the prohibitions against hexavalent chromium and other hazardous materials as specified under applicable clauses, with full compliance to Hazard Communication Standard and accurate identification of any hazardous substances via the Safety Data Sheet, which is a critical pass/fail requirement for award. The contract requires full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 00 indicating no additional special marking is required. Palletization must meet DLA Packaging Requirements for Procurement (RP001). Inspection and acceptance are to occur at the origin, and the manufacturer’s inspection system must meet or exceed SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards. The contract is issued under FOB Origin terms with delivery due in 165 days from the award date, with a need ship date of February 2, 2027 and an original required delivery date of May 11, 2027. All deliveries must be routed to the specified freight and parcel post addresses in Tracy, California. The contract is a full and open small business set-aside under NAICS Code 333996 and may be awarded automatically if no first article testing is required, with HUBZone pricing preference applied unless waived. Payment must be submitted electronically through WAWF per DFARS 252.232-7003, and the contractor must hold a valid SAM registration, comply with all cybersecurity requirements including CMMC Level 2 self-assessment and safeguarding covered defense information under FAR 252.204-7012 and NIST
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-T-268P
The contract specifies the procurement of a spring-loaded shaft seal assembly, identified by NSN 4320-01-253-9108 and part numbers 561B and BW7224 from MEGATOR CORP 52330, with a total quantity of 19 units to be delivered under solicitation SPE7M1-26-T-268P. Delivery is required within 201 days from contract award, with a mandatory ship date of March 10, 2027, and delivery must be made FOB origin. The item is designated as a critical application with strict compliance requirements, including adherence to DLA packaging standards MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The seal assembly must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific authorized exemptions such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment barrier in compliance with NAVSEA 5100-003D. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and government identification must be removed from any non-accepted items. Delivery is to be made to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The unit of issue is AY, the purchase request number is 7017780170, and the contract includes a zero variance allowance for quantity. The solicitation closed on August 20, 2026, with Michael Reese of the Department of Defense as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
Federal
43--SLEEVE,SHAFT,PUMP
Solicitation # SPE7M126T252D
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for the procurement of two shaft sleeves for pumps, identified by NSN 4320014172775, with the approved source designated as 63857 0868B0011G018A. The requirement is part of an RFQ issued under solicitation number SPE7M126T252D, with no hard copies available and all documentation accessible exclusively online through the provided SAM.gov link. Quotes must be submitted electronically and received by the deadline of August 17, 2026, with delivery expected to W1A8 DLA Distribution within 168 days after award. The item falls under NAICS code 333996, and there is no set-aside designation, meaning all responsible sources are eligible to respond. The solicitation does not include specifications, plans, or drawings, and any potential offeror must rely on the approved source data and industry knowledge to meet requirements. All submissions must be timely to be considered, and inquiries should be directed via email to the point of contact provided, DibbsBSM@dla.mil, with additional guidance available through the DIBBS portal using the solicitation number. The contracting office is located in Columbus, Ohio, and while the delivery location is indicated, the place of performance is unspecified. The procurement is classified as combined, indicating no specific category restrictions beyond general responsibility and eligibility for federal contracting.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333996
New
Federal
43--HANDLE ASSEMBLY,PUMP
Solicitation # SPE7M126T254C
The contract solicitation is for the procurement of 17 units of NSN 4320011468338 HANDLE ASSEMBLY, PUMP, to be delivered to DLA DISTRIBUTION JACKSONVILLE within 168 days after award. Only two approved sources are listed for this item, identified by their Cage Codes 58163 and 62228, both corresponding to the same part number 2276-6. This is a Request for Quotation issued under the combined solicitation type, with no set-aside designation, and is open to all responsible sources that submit timely electronic quotes. Hard copies of the solicitation are not available, and no specifications, plans, or drawings are provided, meaning vendors must rely on the NSN and approved source information to formulate their responses. The solicitation number is SPE7M1126T254C, posted on August 6, 2026, with a response deadline of August 17, 2026. The contracting office is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact; no phone or in-person contact information is provided. The full solicitation and additional information can be accessed online through the SAM.gov workspace link.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333996
New
Federal
43--RING,WEARING
Solicitation # SPE7M426T317R
The contract solicitation seeks five wearing rings identified by NSN 4320010520367 to be delivered to DLA Dist San Joaquin with a delivery deadline of 168 days after award. The item is procured under solicitation number SPE7M426T317R, issued by the DLA Land and Maritime office in Columbus, Ohio, and categorized under NAICS code 333996. Only electronic quotes are accepted, and hard copies of the solicitation are not available; all submissions must be made through the provided online portal. Approved sources for the part include 0UBG9 9556693-01, 0UBG9 RY-166400 ITEM13, 0UBG9 RY156693, and 96169 RY-166400 ITEM 13 ALTERNATE, with no technical specifications, plans, or drawings provided. The solicitation is open to all responsible sources, and quotes must be submitted by the deadline of August 17, 2026. For inquiries, prospective vendors are directed to contact the listed buyer via email at DibbsBSM@dla.mil, with additional details accessible through the SAM.gov portal using the solicitation number.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333996
New
Federal
43--PUMP,SLIDING SHOE
Solicitation # SPE7M126T267N
The solicitation seeks 33 sliding shoe pumps identified by NSN 4320012356167 for delivery to DLA Distribution under the W1A8 location, with a required delivery timeframe of 280 days after award. The only approved source for this item is CW7055/H-200C.I. with vendor code 52330, and no alternative suppliers are permitted unless specifically authorized. This procurement is conducted via a Request for Quote (RFQ), with no hard copy documents available; all submissions must be made electronically through the official portal. Specifications, plans, or technical drawings are not provided, and responsible contractors are encouraged to submit quotes based on the available information. The solicitation number is SPE7M126T267N, posted on August 6, 2026, with a response deadline of August 17, 2026. The procurement falls under NAICS code 333996 and is managed by the Department of Defense through DLA Land and Maritime based in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 335931
New
Federal
59--TERMINAL BOARD
Solicitation # SPE4A526T338W
The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for 100 terminal boards identified by NSN 5940011475353, with delivery required to the DLA Distribution Depot in Oklahoma within 573 days of award. The procurement is conducted under solicitation number SPE4A526T338W, which was posted on August 10, 2026, and responses are due by August 18, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. The approved source for this item is 99167 734454, and while no specifications, plans, or drawings are provided, all responsible sources may submit a quote provided it is received on time. The solicitation is classified as a combined type with no set-aside designation, and the NAICS code is 335931. All inquiries must be directed to the designated point of contact via email at DibbsBSM@dla.mil, with additional details accessible through the SAM.gov portal using the provided solicitation number.
Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
16--COIL ASSEMBLY,EXCHA
Solicitation # SPE4A626T14VT
The procurement is for a Coil Assembly, Excha with NSN 1650010208681, requiring one unit to be delivered to the NAEW & CF E-3A COMPONENT within 20 days of award. The solicitation is issued as a combined request for quotation under number SPE4A6Q26T14VT, posted on August 10, 2026, with responses due by August 18, 2026. This is a Small Business Set Aside, total, meaning only eligible small businesses may compete, and it falls under NAICS code 336413 for Aircraft and Aircraft Parts Manufacturing. All quotes must be submitted electronically via the SAM.gov platform, with no hard copies available. Digitized drawings and military specifications can be accessed or ordered electronically through the provided link. The contract is managed by DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia, and all inquiries should be directed to the designated buyer email. The place of performance is not specified beyond the delivery destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
Federal
7013943538, NSN 6680-01-1754205, TRANSMITTER,LIQUID QUANTITY, Part Number: 472358-123-51
Solicitation # SPE4A726R0757
The Department of Defense, through DLA Aviation, is conducting market research to identify capable vendors for the manufacture of the TRANSMITTER, LIQUID QUANTITY with part number 472358-123-51 and NSN 6680011754205, with an estimated requirement of 170 units. This effort, classified under NAICS code 334519, seeks organizations with the capacity to handle end-to-end production, including sourcing components, inspection, testing, packaging, shipping, and managing complex supply chain elements such as long-lead items, diminishing manufacturing sources, and material shortages. Responses are voluntary and do not constitute a solicitation, with no financial responsibility assumed by the government for submission costs. Interested parties must provide organizational details and tailored capability statements demonstrating technical, financial, and managerial readiness to execute similar performance-based service contracts under tight schedules, with controls for cost containment, personnel retention, and risk mitigation. The government will use submissions to determine if the requirement can be procured through full and open competition, potentially resulting in multiple awards. Submissions must be emailed to Mary Repole at Mary.Repole@dla.mil by close of business on May 1, 2024, and no telephone inquiries or feedback on submissions will be accepted. Technical orders and qualification requirements are not available, so respondents are expected to demonstrate general proficiency in manufacturing and logistics support for this type of avionics component. The place of performance is in Virginia, and the office managing this requirement is located in Richmond, VA. No set-aside provisions are specified, and all eligible firms are encouraged to respond regardless of size or ownership type.
Other Measuring and Controlling Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
Federal
6150-01-686-4743; TNM; TNM; BINOCULAR NIGHT VISION DEVICE
Solicitation # SPE4A626R0274
This contract is a sole-source indefinite quantity contract under PR number 1000236259, awarded exclusively to Elbit Systems of America - Night Vision as the approved source of supply for the power cable assembly with NSN 6150-01-686-4743 and part number 285916-1, classified under NAICS 334419. The contract has a five-year base period with no options, and all deliveries must be completed within 150 days of order placement, with stock being distributed to any facility within the Continental United States. Pricing is based on an estimated annual demand of 366 units, with a guaranteed minimum quantity specified in the solicitation, and terms are FOB Origin with inspection and acceptance also occurring at origin for DLA Direct. The solicitation, identified as SPE4A626R0274 and posted on August 10, 2026, with a response deadline of August 26, 2026, includes a mandatory reverse auction component and requires proposals to be submitted directly to the Bid Custodian, not through electronic systems like DIBBS. While the solicitation document is available for download via the BSM Internet Bid Board System, paper copies are not issued, and Adobe Acrobat Reader is required to access the PDF. Proposals must be submitted by the deadline, and only vendors recognized as the approved source are eligible to respond. The contracting office is located in Richmond, Virginia, with primary point of contact Patsy Bedford available for inquiries.
Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
Federal
61--CABLE ASSEMBLY,SPEC
Solicitation # SPE4A626T14US
The solicitation seeks quotes for a cable assembly with NSN 6150015069685, with two line items totaling 153 units—152 units to be delivered to W1A8 DLA DISTRIBUTION within 562 days after award, and one additional unit due within 120 days after award. This is a small business set aside under the SBA program, exclusively open to qualified small businesses, and the North American Industry Classification System code is 335311, indicating it falls under the manufacturing of electric lighting and wiring equipment. All responses must be submitted electronically and are subject to the deadline of August 18, 2026, with the solicitation posted on August 10, 2026. The contracting activity is led by the DLA Aviation office in Richmond, Virginia, under the Department of Defense, and inquiries must be directed to the designated point of contact via email as specified in the solicitation document, with no phone or in-person contact options provided.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
Federal
31--BEARING,BALL,ANNULAR
Solicitation # SPE4A626T14UD
The solicitation seeks 37 annular ball bearings with NSN 3110008385638 under a Small Business Set Aside, with all responses required to be submitted electronically by August 18, 2026. The contract is managed by the Defense Logistics Agency Aviation out of Richmond, Virginia, and delivery must be made to DLA Distribution Cherry Point within 165 days after award. Only approved sources listed by their vendor and part numbers are eligible to quote, and no hard copies of the solicitation are available; all documentation must be accessed online via the provided SAM.gov link. The solicitation number is SPE4A626T14UD, classified under NAICS code 332991, and is open to all responsible small business concerns. No specifications, plans, or drawings are provided, and inquiries must be directed via the designated email address referenced in the solicitation document.
Ball and Roller Bearing Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
Federal
49--CABLE ASSEMBLY SET,
Solicitation # SPE4A526T338J
The solicitation for NSN 4920016559629 CABLE ASSEMBLY SET, numbered SPE4A5526T338J, is a Small Business Set Aside under NAICS code 334419, issued by the Department of Defense through DLA Aviation in Richmond, Virginia. Two units are required to be delivered to W1A8 DLA DISTRIBUTION within 123 days of award, with all quotes submitted electronically through the SAM.gov platform. The opportunity is open to all responsible sources, but only timely electronic responses will be considered, and no hard copies of the solicitation are available. Digitized technical drawings, military specifications, and standards can be accessed or requested online. The response deadline is August 18, 2026, and questions must be directed via email to the designated point of contact listed in the solicitation’s block 5, with further details retrievable through the DIBBS website using the solicitation number.
Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
Federal
61--WIRING HARNESS,BRAN
Solicitation # SPE4A626T14UY
The solicitation seeks procurement of NSN 6150015274287 WIRING HARNESS,BRAN with two line items: eight units to be delivered to DLA DISTRIBUTION DEPOT HILL within 541 days after order award, and one unit to be delivered to the same location within 90 days after order award. All responsible sources may submit electronic quotes, which must be received by the deadline of August 18, 2026. This is a Small Business Set Aside under the SBA program, with a NAICS code of 334419, indicating it is reserved exclusively for small businesses. The solicitation is managed by the DLA Aviation office within the Department of Defense, based in Richmond, Virginia, and all inquiries must be directed via email to the designated point of contact. Quotes must be submitted electronically through the federal contracting portal, and the full solicitation document can be accessed using the provided link and solicitation number SPE4A626T14UY.
Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
16--AFT HOUSING
Solicitation # SPE4A626Q1312
The contract solicitation is for the procurement of 20 units of NSN 1680015615309 AFT HOUSING, with delivery required to W1A8 DLA DISTRIBUTION within 154 days after order award. The sole approved source for this item is 03640 207A023-2, and the solicitation is issued as an RFQ under number SPE4A6626Q1312, exclusively available online with no hard copies provided and no technical specifications, plans, or drawings accessible to offerors. The procurement is designated as a Small Business Set Aside under NAICS code 336413, meaning only qualified small businesses are eligible to respond. Quotes must be submitted electronically and will be considered only if received by the response deadline of August 31, 2026. The contracting activity is managed by DLA Aviation within the Department of Defense, with the office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, as stated in the solicitation’s block 5 or through the provided DIBBS portal link, and no telephone or in-person inquiries are accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 20 days
View Details
NAICS: 336413
New
Federal
SUPPORT, STRUCTURAL COMPONENT, AIRCRAFT / E2A, AH-64E APACHE HELICOPTER
Solicitation # SPE4A726R0727
The Defense Logistics Agency Aviation is conducting market research to identify potential sources capable of manufacturing or legitimately obtaining the structural aircraft component identified by NSN 1560-01-253-0382, currently supplied by Marathonnorco Aerospace, Inc. under part number A2290-5 and associated with Weapon System Designator Code E2A. This notice is solely for informational purposes and does not constitute a solicitation, commitment, or invitation to submit offers; no funds are available for response preparation, and responses are strictly voluntary. Interested parties must submit their information by August 6, 2026, at 3:00 PM Eastern Standard Time via email to Xuan T Phan at xuan.phan@dla.mil. Companies seeking qualification as an approved source for this item must submit a complete Source Approval Request package in accordance with the JACG SAM HB guidelines, demonstrating their ability to produce the component to at least the same quality standards as the current approved supplier. The SAR must include comprehensive technical data proving equivalence or superiority. For NSNs without an active solicitation, SAR packages should be sent to the DLA Weapons Support SAR Program Office in Richmond, Virginia. All responses are reviewed to determine future sourcing options, but submission does not guarantee contract award or approval as a qualified source. The primary point of contact for inquiries is Xuan T Phan, Acquisition Specialist, reachable at 804-659-9554 or xuan.phan@dla.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333310
New
Federal
NOM: Controller, Engaging; WSDC: [EEN]/ END ITEM: E2/C2 All Series; PR: 7013431353 NSN: 6615-017054822: IAW P/Ns: 123AV91430-501 & 123SCAV101-9 & 1781327-5 ;
Solicitation # SPE4A626R0285
The U.S. Department of Defense, through DLA Aviation in Richmond, Virginia, is conducting market research to identify qualified vendors capable of manufacturing the Controller, Engaging (NSN 6615-017054822) with associated part numbers 123AV91430-501, 123SCAV101-9, and 1781327-5. This effort requires full new manufacture including procurement of components, inspection, testing, preservation, packaging, and shipping, along with supply chain management, production forecasting, mitigation of diminishing manufacturing sources, and logistics coordination. The NAICS code 333310 applies, and the estimated requirement is four units. While no solicitation or funding is currently available, responses will inform whether the requirement will be set aside for small businesses or pursued through full and open competition, potentially with multiple awards. Interested parties must submit organization details, capability statements with supporting documentation, and details on any anticipated subcontracting or teaming arrangements by 3:00 PM EST on August 15, 2026, to Lionel Allamby Jr. at lionel.allamby@dla.mil. All submissions are voluntary, and the government assumes no obligation or financial responsibility for response preparation or costs incurred. Information provided will be evaluated for technical capacity, project management effectiveness, cost control, personnel retention, and ability to perform under a performance-based service acquisition framework. No feedback or evaluations will be provided to respondents, and telephone inquiries are not accepted.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
CONTROL BOX, ELECTRICAL / NSN 1660-01-323-5309 / F16 AIRCRAFT
Solicitation # SPE4A726R0765
The DLA Aviation is conducting market research to identify qualified vendors capable of manufacturing the CONTROL BOX, ELECTRICAL (NSN 1660-01-323-5309) for F-16 aircraft applications, with an estimated five-year requirement. This sources sought synopsis is purely for market analysis and does not constitute a solicitation or obligation to award a contract. The NAICS code 336413 applies, and the government is evaluating industry capacity to handle full-scale production including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of part obsolescence issues. Current approved suppliers are Honeywell Limited and Edel Engineering, but any new entrant must submit a Source Approval Request for consideration. Responses must include detailed organizational information, capability statements backed by supporting documentation, and an outline of any teaming or subcontracting arrangements. The government will use submissions to determine whether the requirement should be set aside for small businesses or opened to full and open competition, potentially resulting in multiple awards. All submissions are voluntary, and no cost reimbursement is provided. Responses must be emailed to CHRISTOPHER.ROSE@DLA.MIL by August 14, 2026. No telephone inquiries will be accepted, and no feedback will be given on submissions. Technical data for the item is not held by DLA Aviation, meaning proposers must demonstrate independent capability to meet all performance and compliance standards without reliance on existing drawings or specifications from current suppliers.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details