Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nuclear Quality Assurance and Certification Services

Active

Federal

Response Deadline11/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Nuclear Quality Assurance and Certification Services supports the DLA Weapons Support Nuclear Reactor Program in San Diego. The selected provider will perform independent testing and inspections for prime contractors to ensure strict compliance with MIL-DTL-1183/9A(1) and MIL-DTL-1183K(2) standards. All work must be conducted in accordance with QAP 16236 SQAP-4730-0003 and NAVSEA 5100-003D guidelines. The scope of work requires the use of specialized non-destructive testing equipment, including X-ray, Ultrasonic, and Dye Penetrant tools, with all reporting managed through the iRAPT system. Key deliverables include validated Quality Compliance Reports and COQC documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

General Info

Nuclear quality assurance and certification services for DLA Weapons Support Nuclear Reactor Program.

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

541380 - Testing Laboratories and Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-27-T-0643.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TEE, PIPE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent testing and inspection for prime contractors on DLA Weapons Support Nuclear Reactor Program projects. Conducts inspections per QAP 16236 SQAP-4730-0003 and NAVSEA 5100-003D to verify compliance with MIL-DTL-1183/9A(1) and MIL-DTL-1183K(2). Utilizes NDT equipment (X-ray, Ultrasonic, Dye Penetrant) and iRAPT system reporting. Delivers validated Quality Compliance Reports and COQC documentation.

Similar Contracts

Same NAICS industry code

First Article Testing (FAT) for Indicator Light FiltersThis subcontract involves performing specialized First Article Testing (FAT) for indicator light filters supporting the DLA Weapons Support Nuclear Reactor Program. The selected contractor will conduct tests on three initial production units to validate that their optical and physical properties comply with MIL-DTL-16377/42C and MIL-DTL-16377K SUP 1 standards. Key operational requirements include coordinating with Quality Assurance Representatives, providing shipment notices 14 days in advance, and delivering final test reports. The work is categorized under NAICS code 541380 and will be performed in Jacksonville, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT) ServicesThis subcontract opportunity is for the provision of specialized First Article Testing and Production Lot Testing services to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The scope of work involves conducting First Article Tests on two units and Production Lot Testing on three random samples specifically for Critical Safety Items. To ensure precision and compliance, the contractor must utilize NIST-calibrated metrology equipment and perform material hardness and tensile testing, ultimately delivering certified test reports. Eligible bidders must hold ISO/IEC 17025 or AS9100 certification and meet the requirements for a Total Small Business Set-Aside under NAICS code 541380. The performance of these services will take place in Jacksonville, Florida. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Specialized Testing ServicesThis subcontract opportunity for Specialized Testing Services supports the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The selected provider will perform technical testing and validation for prime contractors, specifically executing electrical functionality and signal integrity tests according to DWG 8126491 Test Procedures. The scope of work involves using specialized test jigs and diagnostic equipment to deliver certified assemblies and detailed test reports. This is a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the defense work, contractors must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract for the DLA Weapons Support Aviation Supply Chain involves providing initial validation testing and quality inspection services for prime contractors. The primary scope of work focuses on the execution of First Article Tests as specified under CLIN 0002, which includes the verification of critical, major, and minor attributes. These inspections must be conducted using sampling plans MIL-STD-1916 or ASQ H1331, and all measuring and test equipment used must be calibrated according to RT001 standards. The project is based at Robins Air Force Base and requires the delivery of an approved first article unit along with a formal FAT Certification Report. Classified under NAICS code 541380, the contract is managed by the Department of Defense. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Traceability VerificationThis subcontract for the DLA Weapons Support Nuclear Reactor Program focuses on providing independent verification of technical compliance and supply chain traceability for prime contractors. The scope of work involves auditing documentation according to DLA Directive Procurement Note C03 and ensuring part marking adheres to MIL-STD-129 and IPC/JEDEC J-STD-609 standards. Additionally, the contractor is responsible for using precision measurement tools to verify lead finishes and delivering comprehensive quality inspection reports and traceability certification packages. The project is managed under NAICS code 541380 for the Department of Defense and will be performed at Hill AFB. Interested parties should note the response deadline of November 13, 2026, for this quality assurance and traceability verification effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThis subcontract for First Article Testing (FAT) and Certification Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will utilize calibrated metrology and inspection equipment to verify the dimensions, material properties, and performance of three sample units against the established technical data package. The primary deliverable for this engagement is one completed First Article Test Report. The opportunity is a total small business set-aside under NAICS code 541380 for the Department of Defense. Due to the nature of the technical data involved, the contractor must maintain ITAR/EAR compliance and hold CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing and Certification for the DLA Weapons Support ASC Commodities Division. The selected contractor will validate manufacturing processes by testing three initial units of NSN 5315-00-495-6522 using precision metrology and inspection equipment. The project requires the delivery of a formal test report and the three tested units within a period of 180 calendar days. The performance of this contract will take place in Tracy, California, under NAICS code 541380. Due to the handling of covered defense information, the contractor must maintain CMMC Level 2 certification. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Thread & Dimensional InspectionThis subcontract opportunity, titled Precision Thread and Dimensional Inspection, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected contractor will provide third-party dimensional conformance inspections for prime contractors, specifically focusing on Class 3A and 3B threads. Work must be performed in accordance with FED-STD-H28/20 System 22 using calibrated precision gauging and measurement tools, with sampling conducted per MIL-STD-1916 or ASQ H1331. The primary deliverables include detailed inspection reports and formal certifications of dimensional conformance. This is a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026. Interested parties can find further details through the DIBBS portal.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves performing validation testing for prime contractors on aircraft component projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work includes conducting First Article Testing on two units and Production Lot Testing utilizing leak detection equipment and hydraulic pressure test benches. The successful contractor is required to hold either AS9100 or ISO/IEC 17025 certifications and must deliver certified Production Lot Test Validation reports and First Article Test Reports. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties must respond by November 10, 2026, following the posting date of November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Sampling InspectionThis subcontract involves performing first article testing and sampling inspection for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on validating manufacturing processes through the application of MIL-STD-1916 or ASQ H1331 zero-based sampling plans. The selected provider will be responsible for verifying critical, major, and minor attributes using calibrated metrology equipment to ensure strict adherence to specifications. The primary deliverables for this engagement include a completed First Article Test report and one validated test unit. The work is associated with NAICS code 541380 and is performed at Hill AFB. Interested parties must respond by November 10, 2026, to the Department of Defense agency.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Testing)This subcontract involves providing specialized First Article Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected laboratory will be responsible for validating initial production units to ensure full compliance with MS22055F and TDP Rev A Gen 1 standards, utilizing specific pressure and material integrity testing equipment. To qualify, the provider must maintain accredited laboratory status under ISO/IEC 17025. The project is based in San Diego, California, and requires the delivery of a certified First Article Test Report within 90 days of the award. Interested parties must respond by November 13, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

Manufacturing of Tubular Light Indicator FiltersThis subcontract involves the manufacturing and supply of two tubular light indicator filters under NSN 6210004415138 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating the filters in strict accordance with MIL-DTL-16377/42C and MIL-DTL-16377K SUP 1, while ensuring full compliance with the Buy American Act and the Berry Amendment. The project mandates adherence to several technical and packaging standards, including MIL-PRF-23199E, MIL-STD-129, and MIL-STD-2073-1E, and explicitly prohibits the intentional addition of mercury. Performance for this Department of Defense requirement is centered in Jacksonville, Florida, with a response deadline set for November 13, 2026.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-STD Packaging and Palletization ServicesThis subcontract, titled MIL-STD Packaging and Palletization Services, is a total small business set-aside under NAICS code 561910 for the DLA Weapons Support Nuclear Reactor Program within the Department of Defense. The project requires the military-grade packaging of 372 hardware units in strict accordance with MIL-STD-2073-1E and palletization following RP001 DLA Packaging Requirements. All materials and labeling systems must be compliant with DLA standards to ensure the shipment is ready for FOB Origin transport. The performance of this contract will take place in Bremerton, Washington. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Manufacture of NSN 5935-00-355-4739This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the fabrication of 372 units of NSN 5935-00-355-4739. The manufacturer must produce these hardware components in strict accordance with Reference Drawing NR 80064 74210, Revision J, utilizing precision machining equipment to meet 1939 technical drawing specifications and DLA quality standards for the 5935 Federal Supply Class. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, with the place of performance located in Bremerton, Washington. Interested parties must respond by November 13, 2026, to provide the necessary components for prime contractors delivering on DLA supply contracts.

POSTED

about 5 hours ago

DEADLINE

Qualified Toggle Switch Supplier (NSN 5930006554248)This subcontract involves the procurement of 179 toggle switches under NSN 5930006554248 to support the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for manufacturing or sourcing units that strictly adhere to basic specification MS24524L, reference specification MIL-DTL-3950L, and QPL-3950-26. All deliverables must meet DLA RA001 quality standards and follow specific packaging guidelines outlined in MIL-STD-2073-1E and MIL-STD-129. The contract requires the delivery of all units FOB Origin to DLA Distribution in Barstow, California. Classified under NAICS code 334419, the opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026. This effort is managed by the Department of Defense to ensure the availability of critical components for nuclear reactor program projects.

Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Dehumidifier Fan Wheels (NSN 4440011877641)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program for the Department of Defense, requires the manufacture or procurement of 60 dehumidifier fan wheels under NSN 4440011877641. The contract is designated as a Total Small Business Set-Aside under NAICS code 333318. All supplied parts must be free of mercury-containing compounds and must adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The completed units are to be delivered to the designated DoDAAC with the place of performance located in Tracy, California. Interested parties must respond by November 13, 2026, to fulfill the requirements of providing these essential components to prime contractors on Department of Defense supply contracts.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of JANTX1N5648A Semiconductor DiodesThis subcontract involves the supply of 24 JANTX1N5648A semiconductor device diodes to support prime contractors for the DLA Weapons Support Nuclear Reactor Program. The selected provider must manufacture or source these components from approved QPL or QML sources, ensuring strict adherence to MIL-PRF-19500R(1) Revision R specifications and MIL-DTL-19491 packaging standards. The contract requires full supply chain traceability in accordance with DLA Directive Procurement Note C03 and marking compliance per MIL-STD-129. All units must be delivered with the necessary certification paperwork to the place of performance at Hill AFB. The response deadline for this requirement is November 13, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The contractor is responsible for providing specialized military-grade packaging and logistics for prime contractors, ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 marking standards. Additionally, the scope includes palletization per RP001 and the management of FOB Destination transport to the DLA Distribution Depot Puget Sound. The performance of these services will take place in Bremerton, Washington. The project focuses on the delivery of fully compliant, marked, and palletized shipments to the designated destination depot. This opportunity falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Protective Dust and Moisture Seal Cap SupplierThis subcontract involves the supply of 1,360 protective dust and moisture seal caps for the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for manufacturing or sourcing caps that match the GE Plastics/General Electric specifications for part number DISC 3 1/2 IN OD X 1/4 IN. All provided materials must be asbestos-free in accordance with FED-STD-313 and must strictly adhere to RA001 technical requirements. The project is managed under the Department of Defense and will be performed in Bremerton, Washington. To be eligible, the contractor must maintain DFARS 252.204-7012 cybersecurity compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

All Other Plastics Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling for Electronic ComponentsThis subcontract involves providing specialized military-grade packaging and labeling services for electronic components supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for ensuring all items are packaged according to MIL-STD-2073-1E and labeled in compliance with MIL-STD-129. Technical requirements include the implementation of preservation method GX and the use of DOD qualified ESD and EMI shielding materials that meet MIL-PRF-81705 standards. The scope of work concludes with the delivery of final products ready for FOB Origin shipment to DLA Distribution DDWO. Performance for this contract will take place in Columbus, Ohio. Interested parties must adhere to the response deadline of November 13, 2026, as specified in the solicitation details.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Supply of Linear Microcircuits (NSN 5962014333345)This subcontract involves the supply of linear microcircuits, specifically NSN 5962014333345, to support prime contractors under the DLA Weapons Support Nuclear Reactor Program. The selected provider is responsible for manufacturing or procuring the components from approved sources, conducting necessary testing, and generating comprehensive traceability reports. Strict adherence to technical standards is required, including lead finish marking per IPC/JEDEC J-STD-609 and mercury restriction compliance according to NAVSEA 5100-003D. Operational requirements mandate that the provider maintains DOD qualified ESD and EMI protection in accordance with MIL-PRF-81705. Additionally, the contractor must demonstrate cybersecurity compliance with CMMC Level 2 and NIST SP 800-171 standards. Performance will take place in Columbus, Ohio, with the final deliverables consisting of the specified microcircuits and their associated documentation.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) Support

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) and Reporting for Weather Strip

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Magnetic Particle Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Electrical Continuity and Insulation Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) and Engineering Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Testing for Critical Safety Items

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) for Seal Ring Couplings

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) Services for Plug Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation for Aerospace Pressure Plates

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) for Bomb Bay Door Cords

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS