Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, PLAIN, BLIND RIV

Active
SPE4A6-26-T-11GFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.

General Info

Procure 300 blind rivets NSN 5310-01-666-2654, deliver FOB origin to New Cumberland, PA, by March 6, 2027, per strict MIL-DLA standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11GF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MOLITAUOLEAVA LANGI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,PLAIN,BLIND RIV
NUT,PLAIN,BLIND RIV
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev C Gen 3 IAW BASIC NON GOVT STD NAS1738 REVISION NR 6 DTD 11/30/2024 PART PIECE NUMBER: 8665986
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-11GF
SECTION B
PR: 7017697109 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697109 0001 EA 300.000
NSN/MATERIAL:5310016662654
DELIVERY (IN DAYS):0207
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/06/2027 Original Required Delivery Date:03/06/2027
SPE4A6-26-T-11GF NSN/Part Number: 5310-01-666-2654 Quantity: 300 EA Purchase Request: 7017697109QTY: 300 Delivery: 207 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-905C
This contract pertains to the supply of 20 gaskets identified by NSN 5330-01-596-7865, with a delivery requirement of five days after award. The solicitation number is SPE7L1-26-T-905C, issued on August 2, 2026, with responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and all supplies must be free of government identification upon rejection. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is strictly forbidden. Covered defense information provisions may apply, and the place of performance is specified as Chambersburg, Pennsylvania, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-903M
The contract pertains to the procurement of two CLIP, SPRING TENSION units with NSN 5340-01-596-7792 and part number 4982953 from CUMMINS INC, under solicitation SPE7L1-26-T-903M. Delivery is required within five days of award, with shipment originating from the supplier and delivered FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The quantity is strictly fixed at two units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master technical and quality requirements, prioritizing federal standards over ASTM D3951 if the item is non-hazardous, or with TQ requirement IP025 if hazardous per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s packaging guidelines. Shipping must occur via the fastest traceable method, explicitly excluding parcel post. The unit of issue is each, with a unit price of $0.000 and a total price of $2.000. The required delivery date is July 30, 2026, and the point of contact for inquiries is Kristina Derry of the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7M1-26-T-244V
The contract pertains to the procurement of COVER, ACCESS under solicitation SPE7M1-26-T-244V, with a requirement for two units to be delivered within 77 days of award to Tracy, California, 95304-5000. The item is identified by NSN 5340-01-516-4047 and is part of purchase request 7012381335. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment later updates it. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to all supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable items containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Haley Clark as the primary point of contact, and responses are due by August 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-906G
The contract pertains to the procurement of a single unit of a part identified by NSN 5360-01-244-5786 under solicitation SPE7L1-26-T-906G, with a required delivery within five days of award. The requirement is governed by the DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item must comply with the mandatory removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance delivery scheduled for Cherry Point, North Carolina, 28533-8051. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with Kristina Derry listed as the primary point of contact, reachable via email and phone. The NAICS code 332722 identifies the industry classification, and no set-aside type has been designated for this acquisition.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-11FC
The contract specifies the procurement of 271 units of screw, cap, hexagon head with NSN 5305-01-390-1169 under solicitation SPE4A6-26-T-11FC, with a required delivery date of March 10, 2027, and a 146-day delivery window. All items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, particularly those identified by R or I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Items are to be delivered FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Palletization, unit packaging, and internal container details are strictly defined, and all shipments must be addressed to the specified receiving warehouse in Tracy, CA. The contract aligns with ASME B18.2.3.1M Rev DTD 12/31/1999 and uses the DoD authorized unit of issue, with payment tied to the provided CLIN and unit price structure.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details