Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, PLAIN, BLIND RIVET

Active
SPE4A0-26-T-4129Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.

General Info

10 cadmium-plated steel rivet nuts, NSN 5310-00-934-0222, delivered in five days, meeting MIL-STD and DLA requirements.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4129.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,PLAIN,BLIND RIVET
NUT<(>,<)> PLAIN, BLIND RIVET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
STEEL, CADMIUM PLATED
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5310-00-934-0222 Quantity: 10 EA Purchase Request: 7017639148QTY: 10 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-905C
This contract pertains to the supply of 20 gaskets identified by NSN 5330-01-596-7865, with a delivery requirement of five days after award. The solicitation number is SPE7L1-26-T-905C, issued on August 2, 2026, with responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and all supplies must be free of government identification upon rejection. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is strictly forbidden. Covered defense information provisions may apply, and the place of performance is specified as Chambersburg, Pennsylvania, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-903M
The contract pertains to the procurement of two CLIP, SPRING TENSION units with NSN 5340-01-596-7792 and part number 4982953 from CUMMINS INC, under solicitation SPE7L1-26-T-903M. Delivery is required within five days of award, with shipment originating from the supplier and delivered FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The quantity is strictly fixed at two units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master technical and quality requirements, prioritizing federal standards over ASTM D3951 if the item is non-hazardous, or with TQ requirement IP025 if hazardous per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s packaging guidelines. Shipping must occur via the fastest traceable method, explicitly excluding parcel post. The unit of issue is each, with a unit price of $0.000 and a total price of $2.000. The required delivery date is July 30, 2026, and the point of contact for inquiries is Kristina Derry of the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7M1-26-T-244V
The contract pertains to the procurement of COVER, ACCESS under solicitation SPE7M1-26-T-244V, with a requirement for two units to be delivered within 77 days of award to Tracy, California, 95304-5000. The item is identified by NSN 5340-01-516-4047 and is part of purchase request 7012381335. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment later updates it. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to all supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable items containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Haley Clark as the primary point of contact, and responses are due by August 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-906G
The contract pertains to the procurement of a single unit of a part identified by NSN 5360-01-244-5786 under solicitation SPE7L1-26-T-906G, with a required delivery within five days of award. The requirement is governed by the DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item must comply with the mandatory removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance delivery scheduled for Cherry Point, North Carolina, 28533-8051. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with Kristina Derry listed as the primary point of contact, reachable via email and phone. The NAICS code 332722 identifies the industry classification, and no set-aside type has been designated for this acquisition.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-11FC
The contract specifies the procurement of 271 units of screw, cap, hexagon head with NSN 5305-01-390-1169 under solicitation SPE4A6-26-T-11FC, with a required delivery date of March 10, 2027, and a 146-day delivery window. All items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, particularly those identified by R or I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Items are to be delivered FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Palletization, unit packaging, and internal container details are strictly defined, and all shipments must be addressed to the specified receiving warehouse in Tracy, CA. The contract aligns with ASME B18.2.3.1M Rev DTD 12/31/1999 and uses the DoD authorized unit of issue, with payment tied to the provided CLIN and unit price structure.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A0-26-T-4128
The item is a TERMINAL, LUG with NSN/Part Number 5940-01-184-9276, for a quantity of 20 units, under Purchase Request 7017639108, with delivery required within five days of award. The solicitation number is SPE4A0-26-T-4128, posted on August 2, 2026, with responses due by August 10, 2026. This procurement falls under NAICS code 335931 and is managed by the Department of Defense through the Aviation Supply Chain ESOC Buys office. The point of contact is Danita Davis, reachable via email and phone provided. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—including foreign nationals in the U.S.—requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling and protection of this information, and compliance is mandatory for all offerors.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A0-26-T-4140
The contract specifies the procurement of one spacer sleeve with NSN 5365-01-575-6974 and part number 23-11709-075 for Daimler Truck North America LLC, under solicitation SPE4A0-26-T-4140. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. The item must be packed and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, adhering to DLA’s packaging requirements, including preservative methods and unit container specifications. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, with attributes assigned verification levels or AQLs based on criticality. All packaging and marking must be consistent with the referenced standards and the specified packaging code U, excluding any special marking. The shipment must be delivered to the designated government location in Slidell, Louisiana, using traceable freight methods—parcel post is prohibited—and is tied to a RDD/NCMS shipment with unique identifiers including the military freight designation and project code TP 1. The unit is to be shipped in accordance with DLA’s authorized unit of issue, and the contracting officer’s point of contact is Danita Davis. The contract incorporates technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is July 29, 2026, and the solicitation closes on August 10, 2026, with the item falling under NAICS code 332999 for other fabricated metal product manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A0-26-T-4130
The contract specifies the procurement of one sleeve bearing with NSN 3120-01-239-1371 and part number 0101-0363, sourced exclusively from Cummins Power Generation Inc. (CAGE 44940), designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards unless otherwise contractually modified. The item must comply with stringent packaging specifications per MIL-STD-129 and ASTM D3951, with palletization adhering to DLA Packaging Requirements for Procurement. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or chemical reagents specified by NAVSEA, and any permitted mercury-containing portable devices must feature shockproof construction and secondary containment. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned specific verification levels or AQLs. Delivery is mandated within five days of contract award under FOB Origin terms, with inspection and acceptance occurring at the destination. Shipping must be traceable and exclude parcel post, using the designated RDD and NMCS codes. The delivery point is Fort Eustis, VA, identified by the W26RK4 routing code and W6YN ship-to address. The contract enforces precise marking of all packages and the bare item in compliance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Unit of issue is each (EA), with no variance allowed in quantity. The required delivery date is July 27, 2026, and the item is subject to all applicable DLA Master List requirements, including those for measuring and test equipment (RT001), tailored quality provisions (RQ001), and covered defense information (RD003). The point of contact for inquiries is Danita Davis, with the solicitation open for response until August 10, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4145
The contract requires the delivery of one machine screw identified by NSN 5305-01-441-9376 and part number 23-12195-075, with a strict delivery deadline of five days from contract award. All items must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in inspection unless explicitly waived. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific codes for protection, wrapping, and containment, and palletization must adhere to DLA packaging requirements. The item must be shipped FOB origin with no quantity variance allowed, inspected and accepted at origin, and transported via traceable means excluding parcel post. The delivery address and mark for location are identical, located at 1539 Beecher Anderson Road, Lenoir NC 28645-0000, with special shipping identifiers and government-only codes applied. The required delivery date is July 28, 2026, and the contract is issued under solicitation SPE4A0-26-T-4145 by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
F00T, EJECTOR, FW
Solicitation # SPE4A0-26-T-4133
The contract pertains to the procurement of a Forward Ejector Foot, designated Part Number 68A733218-1007 with NSN 1440-01-453-4234, under solicitation SPE4A0-26-T-4133. Eight units are required at a unit price of $8.00, with delivery mandated within five days FOB origin. The item must be manufactured using a forging process, necessitating specific tooling and sourcing coordination through designated DLA supply chain teams for Aviation or Land & Maritime systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Acceptance occurs at origin with zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. ISO 9001:2015 quality management certification is required for both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Unit of issue is EA, and Item Unique Identification is not mandated per customer request under DFARS 252.211-7003. All measurements and testing equipment must meet applicable standards, and the contract is administered by the DLA Aviation Supply Chain ESOC Buy office with Danita Davis as the primary point of contact.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A0-26-T-4144
The contract specifies the procurement of one hexagon cap screw, part number 5305-99-352-5546, manufactured by J.C. Bamford Excavators Limited under part number 1305/1908Z, with a delivery requirement of five days from the contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must align with the revision in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization per RP001. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with assigned verification levels or AQLs for defined attributes, and acceptance requires zero non-conformances unless otherwise specified. The item is delivered FOB origin, inspected and accepted at destination, with no qty variance permitted. Transportation details reference DLAD PROC NOTES C19 and C20, and the shipment is designated as RDD/NCMS. The delivery address and markfor location are both the Prince Sultan Air Base in Saudi Arabia, with the contract identifying a need ship date of July 27, 2026, and a response deadline of August 10, 2026. The item has no shelf life, is issued in eaches, and is procured under a federal solicitation managed by the Department of Defense’s Aviation Supply Chain Esoc Buys office.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD E
Solicitation # SPE4A0-26-T-4137
The contract is for the procurement of one plain rod bearing, part number 3120-01-553-8346, under solicitation SPE4A0-26-T-4137, with delivery required within five days FOB origin. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods tailored to bearing type and closure, selection of protective lubricants per established tables, and adherence to quality assurance verification protocols. Inspection and acceptance occur at destination with zero tolerance for non-conformances under sampling plans defined by MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. The contractor must provide documentation for source approval and ensure physical marking per RQ017, with all units individually identified per approved part numbers from approved suppliers including Appleton Marine Inc and JARP Industries, Inc. The unit of issue is each, with no variance allowed in quantity, and special packaging codes and markings must be applied as required under the contract's special packaging clause.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A0-26-T-4138
The contract mandates the procurement of 40 socket head cap screws identified by NSN 5305-01-569-2732 under solicitation SPE4A0-26-T-4138, with delivery required within five days of award. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, identification, and cybersecurity protocols. The screws must adhere to MIL-STD-130N for identification marking and be inspected per System 22 of FED-STD-H28/20 for dimensional conformance on all Class 3A and 3B threads, excluding specified small internal or external threads. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with verification levels VII, IV, and II. Cybersecurity requirements mandate either a CMMC Level 2 Self-Assessment or certification by a C3PAO. The drawing specifications are accessible only during open solicitation via the DIBBS portal, and the product is subject to removal of government identification if rejected. The contract is fully competitive under federal procurement rules, with primary point of contact Danita Davis at the Department of Defense’s Aviation Supply Chain ESOC Buys, and performance location set at Newport News, VA 23607-2734.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A0-26-T-4134
The contract pertains to the procurement of one unit of a cable assembly identified by part number 4027AS1810-02 and NSN 5995016955919, issued under solicitation SPE4A0-26-T-4134 for the Department of Defense. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with stringent technical and quality standards, including MIL-STD-2073-1E packaging, MIL-STD-129 marking without special codes, and DLA packaging requirements. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification level. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the item is subject to covered defense information protocols. The assembly must be shipped via traceable means, excluding parcel post, to the Naval Air Station North Island delivery address in San Diego, California, with a required delivery date of July 27, 2026. The contract specifies government-only identifiers and references the DLA Master List of Technical and Quality Requirements for all incorporated R and I numbered provisions.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-26-T-4135
The contract specifies the procurement of 2 units of SCREW, CAP, HEXAGON HEAD with NSN 5305014784696 and purchase request 7017660241, to be delivered within five days FOB origin with no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and DLA Packaging Requirements, including proper marking and labeling. Sampling procedures require zero non-conformances using MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the bare item must follow RQ017 guidelines, and all shipments must be traceable via freight methods—not parcel post—to the specified DLA delivery point at Camp Lejeune, NC. The required delivery date is July 30, 2026, with inspection and acceptance occurring at destination. The contract is under solicitation SPE4A0-26-T-4135, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys, with point of contact Danita Davis for inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A0-26-T-4139
This contract pertains to the procurement of one aircraft skin part identified by NSN 1560-01-581-7469 and part number 70203-52501-151, sourced from Sikorsky Aircraft Corporation under solicitation SPE4A0-26-T-4139. The requirement mandates strict adherence to Department of Defense packaging standards, specifically MIL-STD-2073-1E, which prohibits the use of commercial or bulk packaging methods such as ASTM D3951. Packaging must include full corner and edge protection with fiberboard or better top and bottom coverage, and all items must be marked per MIL-STD-129 with the special fragile code 01-01. The item must be delivered FOB origin within five days of contract award, with zero tolerance for quantity variance. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance, and the contractor must follow DLA packaging guidelines and the removal of government identification from non-accepted supplies. Sampling is governed by Sikorsky’s approved alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with shipment directed to Fort Irwin, California via traceable freight methods—parcel post is prohibited. The delivery is designated for government use only, with the designated point of contact being Danita Davis of DLA, and the original required delivery date is July 24, 2026. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A0-26-T-4131
This contract specifies the procurement of four dial pressure gauges with critical application status, identified by part numbers 25-1009-SW-02L-VAC/15PS and 25-1009-SW-L02-30IMV&15# from Ashcroft Inc, and 25-1009SW-02L-30 IMV & 15 PSI from Tri-State Technical Sales Corp, all under NSN 6685017140256. The items must be delivered within five days FOB origin with no variance in quantity, and inspection and acceptance occur at the point of origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, including standards for packaging under MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise dictated, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Packaging and palletization comply with DLA-specific requirements, and the shipment must avoid parcel post, using only the fastest traceable means to the specified delivery address at Puget Sound Naval Shipyard. Documentation for source approval, measurement equipment calibration, and removal of government identification from non-accepted items are also required. The contract is issued under SPE4A0-26-T-4131 with a required delivery date of June 26, 2026, and the point of contact is Latitia Orange of the Department of Defense’s Aviation Supply Chain ESOc Buys.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details