This Solicitation opportunity from Department Of Defense was posted on May 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NUT, PLAIN, EXTENDED

Closed

SPE4A6-26-T-40T2Federal

Submission Closed05/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

NUT , SELF-LOCKING, PLThe contract involves the procurement of 27 self-locking nuts, identified by the National Stock Number 5310-00-283-4635. The solicitation, issued by the Department of Defense's Defense Logistics Agency, is designated under the number SPE4A6-26-T-92R0 and is intended for federal acquisition purposes. Key dates include the posting date of June 15, 2026, and a response deadline on June 23, 2026. This solicitation does not specify any set-aside type or NAICS code, indicating that it is open without particular preference for small businesses or other categories. The purchase request associated with this contract is numbered 7017149106. Although detailed location and point of contact information is absent, the contract is firmly anchored within federal procurement channels, with the Defense Logistics Agency serving as the contracting agency responsible for managing this acquisition.

Defense Logistics Agency

POSTED

DEADLINE

PIN-RIVETThe contract involves the procurement of 12 PIN-RIVETS with the National Stock Number 5320-01-696-1475. This solicitation is issued by the Defense Logistics Agency under the Department of Defense, identified by the solicitation number SPE4A6-26-T-92R4. The contract was posted on June 15, 2026, with a response deadline of June 23, 2026. The solicitation is classified as a federal contract, with no specified set-aside or NAICS code indicated. The procurement does not list a specific location for the place of performance or the agency’s office address, and there is no point of contact provided within the contract details. The contract remains open for responses through the DIBBS platform, highlighting the standardized federal purchasing procedures for acquiring these PIN-RIVETS.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of a single unit of a cap socket head screw identified by the National Stock Number 5305-01-721-0324. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-92J7. It was posted on June 15, 2026, with a response deadline set for June 23, 2026. This federal solicitation does not specify any set-aside status or NAICS code, and the place of performance details are unspecified. The contract involves a purchase request number 7017127215 for quantity one of the specified item. The contracting agency is a federal entity, ensuring adherence to government procurement regulations. Although specific contact details and office locations are not provided, the contract and related solicitation information can be accessed through the provided online link on the Defense Logistics Agency’s bidding portal.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the purchase of seven units of a socket head cap screw identified by the National Stock Number (NSN) 5305-01-283-4206. It is issued by the Defense Logistics Agency, a part of the Department of Defense, under the solicitation number SPE4A6-26-T-92P3. The solicitation was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract is categorized as a solicitation type and does not specify any type of set-aside or NAICS code. The place of performance and specific office address details are not provided. The procurement is managed within a federal organization framework, indicating a government acquisition focused on fulfilling defense-related hardware needs.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract involves the procurement of a single unit of a cap socket head screw, identified by the National Stock Number (NSN) 5305-01-684-3687. The solicitation, issued under the number SPE4A6-26-T-92L1, was posted on June 15, 2026, with a response deadline set for June 23, 2026. This solicitation is managed by the Defense Logistics Agency, a branch of the Department of Defense. The contract is a straightforward purchase request (7017127199) for one item, with no specified set-aside or NAICS code indicated, meaning it is open and not restricted to certain business types. The place of performance and specific office address details are unspecified. Interested parties can access the solicitation details and respond via the provided Defense Logistics Agency online portal.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

This contract pertains to the procurement of 631 plain extended nuts, identified by NSN 5310-01-341-4122, with a delivery deadline set for 145 days from the award date, targeting a delivery location at the Defense Logistics Agency Distribution Center in Tracy, California. The contract enforces strict quality and inspection requirements, including inspection and acceptance at the origin point in accordance with FAR 52.246-15 and tailored higher-level contract quality standards. Sampling methods align with military standards MIL-STD-1916 or ASQ H1331, ensuring stringent verification of critical, major, and minor attributes with clear acceptable quality levels. The materials specified include steel compositions 4130, 4140, or 8640 with an overall zinc surface treatment, thread size 5/8"-18 UNF-2B, and marking compliant with MIL-STD-129 without additional special markings. Packaging and shipment are to comply with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking, with specific preservation, cushioning, and wrapping methods outlined to protect the items during transit. Government identification must be removed from non-accepted supplies, and all technical and quality requirements are incorporated from the DLA Master List as applicable to simplified and large acquisitions alike. The contract also addresses covered defense information considerations and provides complete procurement details including solicitation numbers, points of contact, and transportation instructions to ensure proper delivery and compliance throughout the supply chain.

General Info

Procurement of 631 steel nuts with strict quality, packaging, and delivery to DLA Tracy within 145 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-40T2.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 3

Solicitation

Response DeadlineMay 11

Deadline has passed

Submission Closed

05/11/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Charece Smith

contact@example.gov

+1 (555) 000-0000

Full Description

NUT,PLAIN,EXTENDED
NUT,PLAIN,EXTENDED
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
(19207) U S ARMY TANK AUTOMOTIVE COMMAND PROCUREMENT NOTE: 1. PRIOR TO
MAFG REVIEW QAP 12268561. 2. THREAD SIZE: 5/8"(.625")-18 UNF-2B 3.
MATERIAL: STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR
STEEL COMP 8640 OVERALL 4.SURFACE TREATMENT: ZINC OVERALL
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SPE4A6-26-T-40T2
SECTION B
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
IAW BASIC DRAWING NR 19207 12268561
REVISION NR D DTD 01/15/2014
PART PIECE NUMBER: 12268561
IAW REFERENCE QAP 19207 12268561
REVISION NR B DTD 08/13/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12268561
REVISION NR DTD 04/14/2026
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016228775 0001 EA 631.000
NSN/MATERIAL:5310013414122
DELIVERY (IN DAYS):0145
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A6-26-T-40T2
SECTION B
PR: 7016228775 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/04/2026 Original Required Delivery Date:09/17/2026
SPE4A6-26-T-40T2 NSN/Part Number: 5310-01-341-4122 Quantity: 631 EA Purchase Request: 7016228775QTY: 631 Delivery: 145 days ADO