Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NUT, PLAIN, HEXAGON

Active
SPE4A0-26-T-5000Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Aviation Supply Chain ESOC Buys under the Department of Defense, is for the procurement of four plain hexagon nuts identified as commercial off the shelf items under NSN 5310-01-572-5708. The contract requires a delivery timeframe of five days after receipt of order. The primary point of contact for this requirement is Danita Davis. Compliance is mandatory regarding DLA technical and quality requirements, specifically focusing on packaging, the removal of government identification from non-accepted supplies, and physical item marking. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero based sampling plans, with specific verification levels and AQLs assigned to critical, major, and minor attributes.

General Info

DoD procurement of four hexagon nuts (NSN 5310-01-572-5708) with five-day delivery.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-5000.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Notice updated

The notice description changed.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,PLAIN,HEXAGON
NUT, PLAIN, HEXAGON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
ADEQUATE DATA FOR NSN/Part Number: 5310-01-572-5708 Quantity: 4 EA Purchase Request: 7018437169QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-36LQ
This solicitation is for the procurement of six hexagon head cap screws under NSN 5305-01-693-7640 for the Department of Defense. The contract is a total small business set-aside with a delivery requirement of 10 days after receipt of order. Performance is designated for Ft Lewis, and the procurement is managed by the ASC Commodities Division. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and physical identification standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and a Certificate of Quality Compliance is required. Additionally, the supplier must comply with CMMC Level 2 certification and strict export control regulations under ITAR and EAR, requiring approved JCP certification for access to technical data.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, ASSEMBLED WASHER
Solicitation # SPE4A6-26-T-36JH
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 20 units of assembled washer screws under part number 5305-01-572-9215. The contract requires delivery within five days after the order is received and specifies performance in Texarkana, Texas. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards found in the DLA Master List. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. All non-accepted supplies must have government identification removed as per requirement RQ011.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-36KQ
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 16 hexagon head cap screws under NSN 5305-01-554-1791. The contract requires delivery within 169 days after receipt of order and is categorized under NAICS code 332722. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to stringent technical and quality requirements, including DLA packaging standards and specific marking protocols for non-accepted supplies. Notably, the contract mandates compliance with CMMC Level 2 assessments and strict adherence to export control regulations under ITAR and EAR. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed Department of Defense export-controlled training.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-36HA
This contract is for the procurement of close tolerance screws, identified by NSN 5305009413612 and part number NAS663V6HT. The total requirement consists of two line items totaling 3,059 units, with 710 units destined for DLA Distribution Warner Robins and 2,349 units for DLA Distribution San Joaquin. The items are classified as critical application commercial items and must be manufactured according to the current revision of the applicable part standards, including NAS663 through 668 and NAS4004. The agreement mandates strict quality and packaging compliance, requiring a Certificate of Quality Compliance and adherence to MIL-STD-130N for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Delivery is specified as FOB Origin with a delivery window of 126 days, and inspection and acceptance will occur at the destination.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE7L4-26-T-7196
This contract, identified as SPE7L4-26-T-7196, is a solicitation by the Department of Defense for the procurement of 330 socket head cap screws. The items are identified by NSN 5305-01-691-8359 and part number 3001044-080025 from BAE Systems Land & Armaments L.P. The delivery is set for 168 days after order, with a required delivery date of January 25, 2027, and a need ship date of March 23, 2027. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The contract also incorporates specific technical and quality requirements from the DLA Master List, including RA001 and RQ011 regarding the removal of government identification from non-accepted supplies.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
HANDWHEEL
Solicitation # SPE7L1-26-T-17A0
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of eight handwheels under part number 5340-01-546-9215. The contract requires delivery within 168 days after the order is placed and falls under NAICS code 332722. The place of performance is located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. All portable instruments containing mercury must be shock-proof and feature a second boundary of containment.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-36NT
This contract is for the procurement of shear bolts under solicitation SPE4A6-26-T-36NT for the Department of Defense. The requirement consists of two line items for NSN 5306011200866, with quantities of 8 units for delivery to DLA Distribution Red River in Texarkana, Texas, and 1,167 units for delivery to DLA Distribution San Joaquin in Tracy, California. The items are designated as critical application items and must be manufactured according to current part standards, specifically referencing NAS464 and NAS498. Delivery is required within 175 days after the order, with specific need ship dates ranging from July 2025 to March 2026. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the origin, and sampling must follow MIL-STD-1916 or ASQ H1331. Physical identification and bare item marking must comply with MIL-STD-130N.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-280H
DLA Land And Maritime is soliciting quotes for the procurement of 74 gaskets under NSN 5330014906734. The items are to be delivered to DLA Distribution San Diego within 52 days after the order is received. This requirement is a total small business set-aside under NAICS code 332722, and the solicitation is being managed by the office located in Columbus, Ohio. Interested parties must submit their quotes electronically by the deadline of October 5, 2026. The procurement identifies several approved sources for the specific part number 74B880054-201. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A0-26-T-5011
This contract, identified as SPE4A0-26-T-5011, is a solicitation from the Department of Defense Aviation Supply Chain for one socket head cap screw, part number 347/21630 and NSN 5305016056970. The delivery is required within five days after receipt of the order, with a required delivery date of September 23, 2026. The shipment is to be delivered FOB Origin to the AWCF SSF at Fort Campbell, Kentucky, using the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically citing MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-36KE
This contract is for the procurement of socket head cap screws under NSN 5305002737463, with a total quantity of 9,139 units divided across three delivery locations: Corpus Christi, TX; Cherry Point, NC; and Hill AFB, UT. The items must adhere to technical specifications including NASM24678 Revision 3 and FF-S-86J. Delivery is required within 147 days, with specific need ship dates ranging from September to December 2026 and a final required delivery date of May 7, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds. Inspection and acceptance will occur at the origin, and the supplier must provide a Certificate of Quality Compliance.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE7M4-26-T-442R
This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-442R, is for the procurement of 95 socket head cap screws identified by NSN 5305-01-528-6241. The contract requires adherence to specific technical and quality standards outlined in the DLA Master List, including packaging requirements under RP001 and the removal of government identification from non-accepted supplies per RQ011. The delivery timeline is set for 214 days after the order is received, with the place of performance located in San Diego, California. Interested parties must respond by October 5, 2026, and can coordinate with the primary point of contact, Rory O'Reilly. The procurement falls under NAICS code 332722 and is managed as a federal organization acquisition.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7M4-26-T-438T
This contract is for the procurement of 281 flat washers, identified as commercial items under NSN 5310-01-118-7937 and Eaton Aerospace part number MC12298. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-438T. Delivery is required within 168 days after order, with a need ship date of March 23, 2027, and a final required delivery date of October 25, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Because this is designated as a critical application item, inspection and acceptance will occur at the destination. All technical and quality requirements are further detailed in the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-26-T-5009
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-5009, is for the procurement of two hexagon head cap screws with NSN 5305-01-699-4911. The contract requires a rapid delivery turnaround of five days after receipt of order. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific mandates for packaging, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory DOD export-control training to access the data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STOW LOCKING
Solicitation # SPE4A0-26-T-5013
This contract is for the procurement of one stow locking pin, identified by NSN 5315-00-326-3087 and part number 2891179-1. The order is issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-5013. Delivery is required within five days, with the item being shipped FOB Origin to the USS Dwight D Eisenhower (CVN 69). The supplier must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for preparation. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging, except for specific functional exceptions.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A0-26-T-5004
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of four flat washers under part number 5310-01-597-3866. The contract requires a rapid delivery turnaround of five days after the order is placed. Performance is centered in Cullman, Alabama, and the procurement falls under NAICS code 332722. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, with a focus on zero-based sampling plans for acceptance. Additionally, the contract specifies requirements for physical item marking and the removal of government identification from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A0-26-T-5010
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one plain hexagon nut with NSN 5310-01-485-2086 and part number 9Q5909 from Betts Industries Inc. The contract requires delivery within five days after receipt of order and specifies performance at Fort Bliss. The agreement mandates strict adherence to DLA packaging and physical identification requirements, as well as technical and quality standards outlined in the DLA Master List. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, emphasizing a zero-based sampling plan for acceptance. All supplies must be free of government identification if not accepted.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332439
New
DIBBS
SHIM
Solicitation # SPE4A0-26-T-5002
Other Metal Container Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPING
Solicitation # SPE4A0-26-T-5007
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
LEAD, STORAGE BATTERY
Solicitation # SPE4A0-26-T-5006
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
BLADE, SCRAPER
Solicitation # SPE4A0-26-T-5005
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334220
New
DIBBS
SLEEVE, ANTENNA SUPPORT
Solicitation # SPE4A0-26-T-5003
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-5008
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PIN-RIVET
Solicitation # SPE4A0-26-Q-0060

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS