This Solicitation opportunity from Department Of Defense was posted on October 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NUT, PLAIN, PLATE

Closed

SPE4A6-27-T-3955Federal

Submission Closed10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0038327QTA09

Solicitation N0038327QTA09, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of machine bolts, specifically NSN 5306-01-706-0165 (Reference 81205 BACB30PW4P16). The government intends to make a single award to a responsible offeror based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) to assign color ratings. Amendment 0001 updated the required quantity from 2 to 1 and cancelled CLIN 0001AA. The contract requires delivery within 90 days on an FOB Destination basis. Strict adherence to quality management systems such as ISO 9001 or SAE AS9100 is mandatory. Packaging and marking must comply with MIL-STD-2073, MIL-STD-129, and MIL-STD-130, with specific requirements for Item Unique Identification (IUI) and electrostatic discharge protection where applicable. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The procurement also incorporates various Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses regarding the Buy American Act, cybersecurity, and the prohibition of certain foreign telecommunications equipment.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0038326QTA66

Solicitation N0038326QTA66 is a competitive procurement issued by the Navsup Weapon Systems Support office in Philadelphia for the supply of machine screws. The requirement includes multiple line items with quantities ranging from 9 to 50 units each. The government intends to make a single award to a technically acceptable offeror, with the evaluation prioritizing past performance over price. Past performance will be assessed using the DoD Supplier Performance Risk System (SPRS) color ratings. The delivery period is set for 90 days, with FOB destination terms, and early or incremental deliveries are preferred. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073 for packaging and MIL-STD-129 and MIL-STD-130 for marking and item unique identification. Quality management must comply with ISO 9001 or SAE AS9100 standards. A critical requirement for P-8 CAT 1 and CAT 2 items is that no engineering changes affecting interchangeability, performance, safety, or FAA certification may be made without written government authorization. Invoicing and payments are processed electronically through the Wide Area Workflow (WAAF) system. The solicitation period has been extended multiple times, with the final response deadline set for November 27, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010427QFA11

This fixed-price contract, solicitation number N00104-27-Q-FA11, is a total small business set-aside for the procurement of 368 self-locking hex nuts (Part Number NASM 17828-6C, NSN 5310-01-540-9579). The material is designated as Special Emphasis material for use in crucial shipboard systems, meaning that incorrect or defective parts could lead to serious personnel injury or loss of the ship. Consequently, the contractor must adhere to strict quality assurance standards, including ISO-9001 and ISO-10012, and provide a comprehensive certificate of compliance and objective quality evidence. The nuts must be manufactured from QQ-N-281 Class B Cold Drawn material and meet specific toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The contract is awarded on an FOB Destination basis with final delivery required within 210 days. A critical delivery milestone requires all certification data to be submitted via Wide Area WorkFlow (WAWF) 20 days prior to delivery for review and acceptance by the Portsmouth Naval Shipyard. Inspection and acceptance will occur at the origin. The government will utilize a single-award process where past performance is weighted as more important than price, utilizing the DoD Supplier Performance Risk System (SPRS) for evaluation. Additional requirements include strict material traceability per MIL-STD-792, mercury-free manufacturing, and compliance with the Buy American and Balance of Payments Program.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-533-2066)This subcontract involves the supply of aviation-grade hexagon head cap screws under NSN 5305015332066 for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The contractor is responsible for manufacturing or sourcing fasteners that meet strict quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and labeling requirements governed by ASTM D3951, MIL-STD-129, and MIL-STD-130N. Performance will take place in Fort Hood, Texas, under NAICS code 332722. To be eligible, the provider must ensure full adherence to the Buy American Act and maintain cybersecurity compliance in accordance with DFARS 252.204-7012. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Plain Studs (NSN 5307007744572)This subcontract involves the manufacture or procurement of 448 plain studs matching NSN 5307007744572 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The selected provider must possess a valid CAGE code and ensure all deliverables are accompanied by a Certificate of Conformance in accordance with FAR 52.246-15. The contract falls under NAICS code 332722 and requires delivery to a designated government location in Anniston, Alabama. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Shoulder Screws (P/N 1045462-001)This subcontract involves the supply of four shoulder screws, identified by Part Number 1045462-001 and NSN 5305017354751, to prime contractors supporting DLA supply contracts. The procurement is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, with the place of performance located in Fort Bliss, Texas. The contractor must ensure all deliverables strictly adhere to MIL-STD-129 marking requirements and MIL-STD-2073-1E packaging data. The opportunity was posted on October 27, 2026, with a response deadline of November 4, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Machine Screws (NSN 5305-01-645-5118)This subcontract involves the supply of specialized machine screws, identified by NSN 5305-01-645-5118, for prime contractors working on DLA Weapons Support ASC projects. The selected supplier is responsible for manufacturing or sourcing the screws in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Quality assurance must be maintained through sampling performed per MIL-STD-1916 or ASQ H1331, while all shipments must be packaged and marked according to MIL-STD-129 and ASTM D3951/RP001 standards. The scope of work requires the delivery of two machine screws FOB Origin to Fort Carson, Colorado. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and falls under NAICS code 332722. Interested parties must adhere to the specified response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation SPE4A6-27-T-3955 is a total small business set-aside for the procurement of 28,580 plain plate nuts (NSN 5310015794443). This is a source-controlled critical application item that must be manufactured and tested according to Basic Drawing NR 19207 12505959 Revision B. The contract requires a First Article Test (FAT) of one unit, and vendors must either have access to the limited rights data or provide traceability to approved sources. A Source Approval Request (SAR) package is mandatory for companies seeking source approval. The delivery is set for FOB Origin with a need ship date of June 6, 2027, and a final required delivery date of January 5, 2028, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is stringent, requiring compliance with ISO 9001:2015 and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-129 and DLA's RP001 requirements. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

General Info

Small business set-aside for 28,580 plate nuts delivered by January 5, 2028.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

RFQ SPE4A6-27-T-3955

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedOct 13

Solicitation

Notice updatedOct 13

The notice title changed. The notice description changed.

Response DeadlineOct 21

Deadline has passed

Submission Closed

10/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

BERNICE ADAMS

contact@example.gov

Full Description

NUT,PLAIN,PLATE
NUT, PLAIN, PLATE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
ACCURIDE CORPORATION (73195)
LIVONIA, MI
PN 50339
SPE4A6-27-T-3955
SECTION B
CRITICAL APPLICATION ITEM
ACCURIDE CORPORATION 73195 P/N 50339
TDP Rev B Gen 3 IAW BASIC DRAWING NR 19207 12505959 REVISION NR B DTD 09/12/2013 PART PIECE NUMBER: 12505959
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018674028 0001 EA 28,580.000
NSN/MATERIAL:5310015794443
DELIVERY (IN DAYS):0377
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A6-27-T-3955
SECTION B
PR: 7018674028 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/06/2027 Original Required Delivery Date:01/05/2028
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0060
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-27-T-3955 NSN/Part Number: 5310-01-579-4443 Quantity: 28,580 EA Purchase Request: 7018674028QTY: 28580 Delivery: 377 days ADO