Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NUT, PLAIN, ROUND

Awarded

SPE4A6-26-T-16CFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 92 plain round nuts under NSN 5310-00-110-7184. The contract requires delivery within 218 days after order and is governed by NAICS code 332722. Technical drawings and quality requirements are available through the DLA master list and the DIBBS portal. The contract mandates strict compliance with cybersecurity and export control regulations, specifically requiring CMMC Level 2 certification and adherence to ITAR or EAR guidelines. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Additional requirements include specific DLA packaging standards, physical item marking, and the removal of government identification from any non-accepted supplies.

General Info

DoD procurement of 92 round nuts requiring CMMC Level 2 and export compliance.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$5,184.2

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

QUALITY SOCKET SCREW MANUFACTURING

Award Issued Date

08/26/2026, 12:00:00 AM UTC

Documents

2

Request for Quotations SPE4A6-26-T-16CF

rfq

High

SPEA46-26-V-3242 - Order for Supplies or Services

award

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedAug 12

Solicitation

AwardedAug 26

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Vincent Price

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE4A626V324Z posted on DIBBS. Awardee: QUALITY SOCKET SCREW MANUFACTURING (CAGE 5N116) Total Contract Price: $5,184.20 Award Date: 08-26-2026 Solicitation: SPE4A6-26-T-16CF Line items: - NUT, PLAIN, ROUND (NSN/Part 5310001107184, PR 7017868443)

Similar Contracts

Same NAICS industry code

PACKING, PREFORMED

Solicitation # SPE7L3-27-Q-0048

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

Specialized Screws, Nuts, and Washers Production

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

VACCO NSNs-Sole Source

Solicitation # CM26265595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26265595 to identify potential manufacturers for a variety of hardware components. The request focuses on identifying sources capable of producing items such as sleeve bushings, bearings, socket head cap screws, self-locking hexagon nuts, washers, fiberlocks, and quick release pins, as specified by a provided list of National Stock Numbers and part numbers. Interested parties must provide the manufacturer's location and point of contact information to Contract Specialist Carlos Oquendo by the response deadline of October 23, 2026. Companies seeking to be qualified as an Approved Source must apply through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. This process requires the submission of a technical data package to demonstrate that the prospective contractor can manufacture products of equal or superior quality to the Original Equipment Manufacturer. The responsibility lies with the contractor to document and prove their product's equivalence. All responses and completed market surveys should be submitted directly to the listed Contract Specialist.

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

NUT,PLAIN,HEXAGON

Solicitation # N0010426QFF19

This contract pertains to the procurement of hexagon nuts designated as SPECIAL EMPHASIS Level I material for use in critical shipboard systems, where failure could lead to catastrophic outcomes including loss of life or vessel. The nuts must conform to York drawing 366-59531 and be manufactured from QQ-N-286 material in annealed and age-hardened condition, with stringent requirements for traceability, chemical and mechanical testing, and nondestructive inspection. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be marked permanently using approved methods per MIL-DTL-1222 and MIL-STD-792, ensuring identification of manufacturer, material symbol, and unique heat-lot traceability. All certification data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) prior to shipment, approved by N39040, and accompanied by electronic notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, with no material allowed to ship without prior acceptance. The contract mandates adherence to ISO-9001 or MIL-I-45208 quality systems, with Government Quality Assurance at source, including inspections by DCMA and review of all test reports, which must be positive, unqualified, and directly tied to traceable marking on the material. Testing must be performed by approved labs for critical procedures like Slow Strain Rate Tensile Tests, and chemical and mechanical certifications must reflect actual properties post-fabrication, prohibiting transcription or ambiguous language. Internal threads must be cut, not cold-formed; threads must be inspected per FED-STD-H28, with System 21 as minimum unless otherwise specified. Mercury is strictly prohibited, and all packaging and handling must follow MIL-STD-2073. Delivery is capped at 365 days post-effective date, early delivery is permitted without cost, and the order is classified as DX/DO rated under DPAS for national defense priority. All subcontracting, waivers, and deviations require formal approval, and failure to comply with any requirement—including missing, incomplete, or improperly formatted certifications—will result in rejection of materials.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QFB96

This contract pertains to the procurement of a machine bolt, designated as a critical shipboard component classified under Special Emphasis material (Level I/SUBSAFE), requiring stringent quality and traceability controls to ensure safety and reliability. The bolt must conform to specific standards, including Parker drawing 600-992-688 and MIL-DTL-1222 for self-locking elements, with cadmium plating meeting QQ-P-416 requirements. Contractors are responsible for providing full traceability from raw material to finished product, including certifications for chemical and mechanical properties, non-destructive inspections, and hydrogen embrittlement relief treatments. A certificate of compliance must be submitted for each shipment, confirming adherence to all contractual and specification requirements. The contract enforces a rigorous inspection regime before Government acceptance, including sampling plans with zero defect tolerance and full documentation of all testing and quality assurance measures. Furthermore, the contract mandates compliance with ISO 9001 quality management systems or equivalent militarily recognized standards and requires Government Quality Assurance audits at the contractor’s facility. All deviations or waivers must be approved by the Contracting Officer and shared with the Government’s quality assurance representative. The bolt must be marked permanently in accordance with specified military standards to maintain complete traceability, and strict procedures are outlined for handling, storage, and inspection, including when Government Furnished Material is involved. Subcontractors are subject to quality oversight and regular audits to ensure product conformity. Delivery includes certification data submission via Wide Area Work Flow for review prior to shipment acceptance, with a maximum delivery schedule of 365 days from the contract effective date. The contract is a rated order under the Defense Priorities and Allocations System (DPAS), emphasizing national defense priority.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

NUT,PLAIN,ROUND

Solicitation # N0010426QFF34

This solicitation is for the procurement of Stem Retaining Nuts manufactured in accordance with NAVSEA drawing 6602371 and MIL-DTL-24252 specifications. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict quality control, quantitative chemical and mechanical analysis, and a formal certificate of compliance. The contract is a DO-rated order for national defense use, with a proposed final delivery window of 365 days after the effective date of the contract. The contractor must maintain a quality system compliant with ISO-9001 and provide a one-year warranty from the date of delivery. All certification data must be submitted and accepted via Wide Area Workflow (WAWF) prior to shipment. The solicitation is a combined effort for multiple related items, allowing for awards at the CLIN level to multiple vendors. Access to certain technical drawings requires a signed security agreement due to the inclusion of NOFORN and Naval Nuclear Propulsion Information.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N6660426Q0492

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting quotes under RFQ N6660426Q0492 for the manufacture of 1,250 Mast Bolts (Part No G770662-5) and associated material certifications. This unrestricted acquisition is being conducted on a Firm Fixed Price (FFP) basis and will be awarded to a single responsible offeror using the Lowest Price, Technically Acceptable (LPTA) evaluation method. Delivery is required F.O.B. Destination to Naval Station Newport, RI, with a base year delivery date of approximately November 2, 2026, and potential for four option years. To be determined technically acceptable, offerors must provide quotes valid for at least 30 days, prove past performance on similar work, and ensure all items are sourced directly from the OEM or authorized channels. Due to the Distribution D and Export Control designation of the technical drawings, access is strictly limited to offerors with an active Joint Certification Program (JCP) registration and an approved DD2345 form. Additionally, vendors must have an active NIST SP 800-171 assessment and a CMMC Level 2 self-assessment uploaded to the Supplier Performance Risk System (SPRS) module of the PIEE website. All contractors must be registered in the System for Award Management (SAM) prior to award. Offers are due by 11:00 a.m. EST on October 20, 2026.

Nuwc Division Newport

POSTED

about 7 hours ago

DEADLINE

NUT, HEX, HEAVY

Solicitation # N0010426QFG22

This contract is for the procurement of Heavy Hex Nuts designated as Special Emphasis Level I material, critical to the safe and reliable operation of shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must conform to Leslie Controls Drawing 36938N and ASTM-A194 Grade 2H or Grade 7, with stringent requirements for chemical and mechanical certification, traceability, and nondestructive testing using either liquid penetrant or magnetic particle inspection in accordance with T9074-AS-GIB-010/271 and MIL-DTL-1222. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be permanently marked with traceability identifiers per MIL-STD-792, including manufacturer and material symbols. Certification reports must be complete, unqualified, and directly linked to the physical part, with transcription explicitly prohibited. The contract mandates adherence to ISO-9001 or an approved alternate quality system, with Government Quality Assurance conducting inspections at the supplier's facility. All certifications and test data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) and reviewed and accepted prior to shipment, with no material allowed to be shipped without formal acceptance. The contract incorporates stringent controls for configuration management, requiring formal Engineering Change Proposals for any modifications affecting form, fit, function, or interface, and prohibits unauthorized deviations or waivers without prior written approval from the Contracting Officer. Material must be mercury-free, internal threads must be cut and not cold-formed, and packaging requirements exclude specific container types but mandate MIL-STD-129 labeling and thread protectors. The solicitation is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, indicating national defense priority. Subcontractors are subject to the same quality requirements as the prime, and the buyer is responsible for ensuring supplier capability through documented evaluation and audit procedures. Delivery must be completed within 365 days of contract effective date, with submission of certification data due no later than 20 days prior to scheduled delivery. Offers must not include quantity discounts across multiple CLINs to avoid unreasonably low award values, and the solicitation may result in multiple awards. The contract also enforces Buy American provisions, small business subcontracting obligations, and strict cybersecurity and data handling protocols under recent defense deviations and prohibitions.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

53--RETAINER,PACKING

Solicitation # SPE7L1-27-U-0087

Solicitation SPE7L1-27-U-0087 is a total small business set-aside issued by the Defense Logistics Agency (DLA) Weapons Support Land Supply Chain for the procurement of 579 packing retainers (NSN 5330-01-176-0932). This critical application item must be manufactured according to basic drawing 76823 2-43216, revision F. The required delivery timeframe is 48 days after the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Specific packaging requirements dictate that items be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with palletization following RP001. Additionally, the contractor must comply with export controls for technical data under ITAR or EAR and meet cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010427QBB20

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

SCREW,CAP,SOCKET HD

Solicitation # N0010426QFB13

This contract is for the supply of a Screw, Cap, Socket Head, identified by Vacco drawing S1E10064, part number V2C11114-16DZO, intended for use in a critical shipboard system where material failure could result in severe consequences including loss of life or damage to vital shipboard systems. The material specified for this item is SAE-AMS-5643 Condition H1025, and stringent quality assurance and traceability requirements are mandated due to the classification of the material as SPECIAL EMPHASIS (Level I). The contractor must provide full certification including quantitative chemical and mechanical analysis, liquid penetrant inspection, and thread inspections in accordance with specified military and industry standards. Traceability from raw material heat/lot numbers through processing to finished parts must be maintained, with marking requirements to enable identification of material grade and manufacturer. The contract enforces rigorous quality system standards conforming to ISO 9001, MIL-I-45208, and related calibration standards and requires government source inspection and acceptance prior to shipment. Certification data must be submitted electronically via the Wide Area Work Flow system to Portsmouth Naval Shipyard for review and acceptance before any shipments are made. The contract also includes provisions for configuration control, engineering change management, and strict handling of any deviations or waivers, which require review and approval by the contracting officer. Packaging and marking must comply with military standards. Additional clauses prohibit the use or contamination by mercury. Overall, the contract places heavy emphasis on ensuring material integrity, precise documentation, and quality control to meet military specifications for a critical safety item essential for naval applications.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

STUD,CONTINUOUS THR

Solicitation # N0010426QFA72

The contract pertains to the procurement of specialized studs designated as Special Emphasis Level I material, critical for use in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to QQ-N-286 Class A specifications and be manufactured in strict accordance with William Powell Company Drawing 67153, with all components undergoing rigorous chemical and mechanical testing, including liquid penetrant and ultrasonic inspections, as well as slow strain rate tensile testing performed only by approved laboratories. Traceability is mandatory throughout the entire lifecycle, requiring unique heat-lot markings on each part and comprehensive certification reports that must directly link to the physical item without transcription or disclaimers. All certifications, including those for tensile, yield, elongation, and hardness properties, must be 100% verified and submitted via Wide Area Work Flow to Portsmouth Naval Shipyard for review and acceptance prior to any shipment, with no material allowed to ship without explicit acceptance. The contractor must maintain a certified quality system compliant with ISO-9001 and ISO-10012 or as an alternative MIL-I-45208 and MIL-STD-45662, subject to government audit at any time. All subcontractors must be vetted and monitored to ensure adherence to contract requirements, with traceability maintained even during outsourced operations. Final inspection requires zero defect tolerance with 100% verification of all certifications, material markings, and nondestructive test reports. Fasteners must be permanently marked with material symbol, manufacturer ID, and traceability code prior to coating, following MIL-DTL-1222 standards. The contract enforces Buy American provisions, a DX priority rating under DPAS, and prohibits mercury or mercury compounds. Deliveries are limited to a 365-day window with incremental shipments permitted at no extra cost, and any design changes necessitate an Engineering Change Proposal approved by the Government. Past performance will be evaluated in award decisions, and all documentation must be submitted electronically through ECDS and WAWF systems with the designated point of contact being Lydia M. Shaloka.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LIFE PRESERVER, VEST

Solicitation # SPE8E6-27-Q-0022

POSTED

about 2 hours ago

DEADLINE

HANGER ASSEMBLY, POD, AI

Solicitation # SPE8E6-26-Q-0687

POSTED

about 2 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0099

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE8E4-27-Q-0015

POSTED

about 2 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0098

POSTED

about 2 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0100

POSTED

about 2 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE8E8-27-Q-0032

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Materials HandlerThis subcontract with the Defense Logistics Agency involves providing specialized packaging and logistics services for prime contractors on aerospace supply contracts. The scope of work requires the packaging and marking of five valve assemblies in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with specific hazardous materials labeling mandated by 29 CFR 1910.1200. The contractor must possess HAZMAT handling certification to ensure all components are cleared for international transit. The final deliverables are to be prepared for FOB Origin delivery to the 2nd Supply Depot FMS Import Manager located in Busan, South Korea. This opportunity falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Adjustable Air Butterfly Valve Assembly ManufacturerThis subcontract involves the manufacture and supply of five adjustable air butterfly valve assemblies, specifically NSN 4820-01-100-1894, for use in Bell AH-1 helicopters under Defense Logistics Agency aerospace procurement projects. The contractor is required to utilize precision machining for fabrication, as additive manufacturing is strictly prohibited. The final deliverable consists of five completed and inspected valve assemblies. To be eligible, the provider must maintain CMMC Level 2 and ITAR/EAR compliance, along with certification under SAE AS9003 or ISO 9001. Additionally, the manufacturer must be certified under the US/Canada Joint Certification Program. Responses to this solicitation are due by October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

HAZMAT Freight and Delivery ServicesThis subcontract for HAZMAT Freight and Delivery Services involves the transportation and delivery of hazardous material batteries for prime contractors supporting the Defense Logistics Agency. The scope of work includes hauling materials to NAS Lemoore, NAS Whidbey Island, and NAVSUP FLT Log Ctr Misau in Japan via FOB Destination. The contractor is responsible for utilizing HAZMAT-certified vehicles and preparing all necessary HAZDEC forms and documentation to ensure safe and compliant delivery. Strict adherence to technical standards is required, specifically IP025, MIL-STD-129, MIL-STD-2073-1E, and RP001 palletization guidelines. This requirement falls under NAICS code 484220 and is managed by the Department of Defense. Interested parties must submit responses by October 27, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-01-571-5043)This subcontract involves the supply of four commercial off-the-shelf storage batteries, specifically NSN 6140-01-571-5043, to support prime contractors under the Defense Logistics Agency. The batteries must meet Type I Code H specifications, which include a non-extendable 12-month shelf life and the provision of necessary shelf-life certifications upon delivery. Quality assurance for the deliverables is governed by MIL-STD-1916 or ASQ H1331 sampling standards. The contract falls under NAICS code 335910 and specifies a place of performance in APO 96319-5000. Responses to this requirement are due by October 27, 2026.

Battery Manufacturing

POSTED

DEADLINE

Freight Transport for Construction Materials (FOB Origin)This subcontract involves the freight transport of dimensional lumber for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The selected provider will be responsible for picking up materials from the manufacturer and transporting them to Fort Drum, New York, in strict accordance with First Destination Transportation program guidelines. Deliveries must be made to the designated inspection and acceptance point. Qualified contractors must utilize flatbed or standard freight vehicles capable of hauling 12-foot lengths and possess the necessary authorizations for delivery to military installations. This opportunity falls under NAICS code 484220 and requires responses by October 26, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS