This Solicitation opportunity from Department Of Defense was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NUT, SELF-LOCKING, BLIND

Closed

SPE4A6-26-T-31WVFederal

Submission Closed09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0038327QTA09

Solicitation N0038327QTA09, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of machine bolts, specifically NSN 5306-01-706-0165 (Reference 81205 BACB30PW4P16). The government intends to make a single award to a responsible offeror based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) to assign color ratings. Amendment 0001 updated the required quantity from 2 to 1 and cancelled CLIN 0001AA. The contract requires delivery within 90 days on an FOB Destination basis. Strict adherence to quality management systems such as ISO 9001 or SAE AS9100 is mandatory. Packaging and marking must comply with MIL-STD-2073, MIL-STD-129, and MIL-STD-130, with specific requirements for Item Unique Identification (IUI) and electrostatic discharge protection where applicable. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The procurement also incorporates various Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses regarding the Buy American Act, cybersecurity, and the prohibition of certain foreign telecommunications equipment.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0038326QTA66

The solicitation seeks quotes for MACHINE SCREWS under solicitation number N0038326QTA66, issued by the Naval Supply Systems Command Weapon Systems Support, with theNAICS code 332722 and a response deadline of May 29, 2026 at 4:30 PM EST. All submissions must be emailed to [email hidden], and late submissions will not be considered. The solicitation employs competitive procedures, but if only one acceptable quote is received, the Government will transition to sole source negotiations. The award will be made to the offeror whose quote is technically acceptable and most advantageous to the Government, with price and lead time as key evaluation factors. Early and incremental deliveries are preferred. The contract applies specifically to P-8 CAT 1 and CAT 2 items and incorporates additional commercial item requirements under FAR 52.212-4, including mandatory notification and approval for any engineering changes affecting interchangeability, performance, safety, reliability, FAA certification, or part re-identification. Contractors must provide documentation such as Service Bulletins or OEM change notifications and obtain written authorization prior to implementing any such changes. The contract also incorporates numerous federal requirements including Buy American provisions, Equal Opportunity for Workers with Disabilities, Annual Representations and Certifications under Deviation 2025-O0003 and 2025-O0004, and instructions for invoice and receiving report submissions. Contract documents are considered officially issued upon electronic transmission or mail deposit. The primary point of contact is Carolyn A. Clark, reachable via email or telephone at [phone hidden], with performance and delivery to be coordinated within the U.S., specifically through the Philadelphia office.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010427QFA11

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-533-2066)This subcontract involves the supply of aviation-grade hexagon head cap screws under NSN 5305015332066 for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The contractor is responsible for manufacturing or sourcing fasteners that meet strict quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and labeling requirements governed by ASTM D3951, MIL-STD-129, and MIL-STD-130N. Performance will take place in Fort Hood, Texas, under NAICS code 332722. To be eligible, the provider must ensure full adherence to the Buy American Act and maintain cybersecurity compliance in accordance with DFARS 252.204-7012. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Plain Studs (NSN 5307007744572)This subcontract involves the manufacture or procurement of 448 plain studs matching NSN 5307007744572 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The selected provider must possess a valid CAGE code and ensure all deliverables are accompanied by a Certificate of Conformance in accordance with FAR 52.246-15. The contract falls under NAICS code 332722 and requires delivery to a designated government location in Anniston, Alabama. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Shoulder Screws (P/N 1045462-001)This subcontract involves the supply of four shoulder screws, identified by Part Number 1045462-001 and NSN 5305017354751, to prime contractors supporting DLA supply contracts. The procurement is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, with the place of performance located in Fort Bliss, Texas. The contractor must ensure all deliverables strictly adhere to MIL-STD-129 marking requirements and MIL-STD-2073-1E packaging data. The opportunity was posted on October 27, 2026, with a response deadline of November 4, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Machine Screws (NSN 5305-01-645-5118)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation SPE4A6-26-T-31WV is a request for quotations issued by the DLA Aviation ASC Commodities Division for 139 self-locking blind rivet nuts, identified by NSN 5310010563228. This critical application item must be manufactured in accordance with the current revision of part standard NAS1734-6L11P. The procurement is designated as a commercial item and requires destination inspection and acceptance. Delivery is required by April 29, 2027, with a need ship date of March 16, 2027, to the DLA Distribution Depot at Hill AFB, Utah. The contract mandates strict quality and packaging standards, including compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances when using MIL-STD-105/ASQ Z1.4. Technical requirements are further detailed in the DLA Master List and the provided Technical Data Package. Offerors must comply with the Buy American Act and the Berry Amendment, and the government will not evaluate items produced via additive manufacturing. Payment processing is to be handled electronically through the Wide Area WorkFlow system.

General Info

DLA seeks 139 self-locking blind rivet nuts for delivery to Hill AFB by 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-31WV RFQ

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 17

Solicitation

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Ashley JONES-TURNER

contact@example.gov

+1 (555) 000-0000

Full Description

NUT,SELF-LOCKING,BLIND RIVET
NUT,SELF-LOCKING,BLIND RIVET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY GAUGING REQUIREMENTS AS FOLLOWS ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SPE4A6-26-T-31WV
SECTION B
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NAS1734 REVISION NR 6 DTD 03/31/2015 PART PIECE NUMBER: NAS1734-6L11P
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-COQC-19071 REVISION NR DTD 03/12/2019 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018389361 0001 EA 139.000
NSN/MATERIAL:5310010563228
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.
SPE4A6-26-T-31WV
SECTION B
PR: 7018389361 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:03/16/2027 Original Required Delivery Date:04/29/2027
SPE4A6-26-T-31WV NSN/Part Number: 5310-01-056-3228 Quantity: 139 EA Purchase Request: 7018389361QTY: 139 Delivery: 171 days ADO