Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, SELF-LOCKING, EX

Active
SPE4A6-26-T-05HXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a self-locking nut, commercial off the shelf (COTS) item, identified by NSN 5310-14-568-4359 and part number PLH54M, with a quantity of 48 units. The item is classified as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The contract requires delivery FOB origin within 169 days of award, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the delivery address designated as the DDSP New Cumberland facility in Pennsylvania. The required ship date is January 6, 2027, and the original delivery deadline was November 7, 2026. Only approved suppliers listed — The Boeing Company, Brooks & Maldini Corporation, and Howmet Fixations Simmonds SAS — may fulfill this requirement. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, and all documentation must align with the solicitation number SPE4A6-26-T-05HX, issued under the NAICS code 332722 by the Department of Defense’s ASC Commodities Division.

General Info

Procure 48 self-locking nuts NSN 5310-14-568-4359, FOB origin, delivery by Jan 6, 2027, approved suppliers only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05HX for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
NUT,SELF-LOCKING,EX
NUT,SELF-LOCKING,EX
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N PLH54M
BROOKS & MALDINI CORPORATION 4WKC9 P/N PLH54M
HOWMET FIXATIONS SIMMONDS SAS F0224 P/N PLH54M
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017454414 0001 EA 48.000
NSN/MATERIAL:5310145684359
DELIVERY (IN DAYS):0169
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE4A6-26-T-05HX
SECTION B
PR: 7017454414 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/06/2027 Original Required Delivery Date:11/07/2026
SPE4A6-26-T-05HX NSN/Part Number: 5310-14-568-4359 Quantity: 48 EA Purchase Request: 7017454414QTY: 48 Delivery: 169 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, SHOULDERThis contract pertains to the procurement of a shoulder screw with NSN 5305-01-481-0603 and part number 1994303-13, sourced from Raytheon Company or McMaster-Carr Supply Co, with a total quantity of 45 units ordered at $45.00 per unit. The item is classified as a critical application and requires strict adherence to DLA's technical and quality requirements, which are referenced via the DLA Master List of Technical and Quality Requirements identified by R or I numbers. Technical data for this item is proprietary or insufficient for competitive procurement, and no approved technical data package currently exists. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan with zero non-conformances required unless otherwise stated; unspecified attributes are treated as major with verification levels assigned accordingly. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA’s RP001 requirements, and all items must be labeled with government identification removed from non-accepted supplies and physically marked per RQ017. Delivery is FOB origin with an 83-day lead time, scheduled for February 15, 2026, to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. All documentation, measuring equipment, and quality controls must meet specified standards, and any deviation from prescribed procedures is prohibited without explicit authorization.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANEThe contract calls for the procurement of 81 units of SCREW ASSEMBLY, PANE with NSN 5305-01-180-4759, under solicitation SPE4A6-26-T-05KQ, issued by the ASC COMMODITIES DIVISION of the Department of Defense. The item is classified as a critical application and must meet all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including physical identification per RQ017 and removal of government identification from non-accepted supplies per RQ011. Packaging must comply with MIL-STD-2073-1E, using preservation method 31 (cleaning/drying), with no additional preservation, wrap, or cushioning materials specified, and palletization must adhere to DLA packaging requirements RP001. Marking is required to conform to MIL-STD-129 with no special marking codes, and barcoding must follow DLA guidelines. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and zero non-conformances are required for acceptance unless otherwise stated. Delivery is set for 55 days ADO, with an original required delivery date of March 22, 2026, and a need ship date of May 17, 2026, to FOB Origin, to the DDSP New Cumberland Facility in Pennsylvania. The contract is a fixed-price, single-line-item delivery with a total value of $81.00, resulting in a unit price of $1.00 per item, and payment must be processed electronically through WAWF. The contracting office requires compliance with numerous FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility verification, sustainable products, hazardous material safety data, NIST SP 800-171 cybersecurity requirements, and transportation by sea. Contractors must disclose UEI and CAGE codes, affirm small business status if applicable, and provide safety data sheets for any hazardous materials. No options, extensions, or additional CLINs are present, and the contract incorporates no subcontracting restrictions beyond those for commercial
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of a COVER, ACCESS item with NSN 5340-01-560-0019, for a quantity of 11 units, under purchase request 7017439466, with a delivery requirement of 165 days after delivery order. The solicitation number is SPE7L1-26-T-827V, issued on July 12, 2026, with responses due by July 23, 2026. The North American Industry Classification System code is 332722, and the contracting activity is under the Department of Defense’s Land Supply Chain, with performance location specified at New Cumberland, PA, 17070-5002. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The definition of Covered Defense Information applies, and suppliers must remove government identification from any non-accepted supplies. Primary point of contact is Michael Nordahl, reachable at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for 10,000 machine screws identified by NSN 5305000570509 and part number SPE4A6-26-T-05KV, classified as a commercial item under military specification standards. Delivery is required FOB origin within 127 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturer’s facility. The screws must adhere to the current revision of NASM51958 Revision 3 dated 07/31/2019 and FF-S-92E Revision E dated 05/05/2025, with prior revisions acceptable only for items manufactured before the solicitation date. The item is designated as a critical application item, requiring strict compliance with quality and technical requirements referenced in the DLA Master List, including sampling criteria aligned with MIL-STD-1916 or ASQ H1331, and zero non-conformances unless otherwise stated in the contract. Marking and packaging must follow MIL-STD-129 and MIL-STD-2073-1E, with no special marking required beyond standard identification. Mercury and mercury-containing compounds are strictly prohibited in the screws, their packaging, or any direct contact materials, except for specific exempted uses such as batteries, fluorescent lamps, or controlled instruments with additional containment, in accordance with NAVSEA 5100-003D. Portable fluorescent lamps and instruments containing mercury must have shockproof design and secondary containment. All identification and labeling requirements align with MIL-STD-130N, including manufacturer logotype, lot number, and material marking. The item must be delivered to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for June 9, 2026, and the original delivery deadline on December 7, 2026. Transportation and shipping procedures must comply with DLAD Procurement Notes C19 and C20, and all unit of issue and packaging codes are specified under the referenced standards. The contracting office is the ASC Commodities Division of the Department of Defense, with Antonia Willcox as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Supply – Set Screws (NSN 5305-01-366-1122)
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details