Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, SELF-LOCKING, PL

Active
SPE4A6-26-T-06AHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 361 self-locking nuts, part number 5310-01-599-9093, under solicitation SPE4A6-26-T-06AH, with a required delivery in 171 days and a ship date of January 10, 2027, and original delivery date of January 17, 2027. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and must be marked and labeled per MIL-STD-129. Packaging must conform to DLA packaging requirements and be palletized according to RP001, with no variance allowed in quantity—exactly 361 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, priced at $361.00 per unit, totaling $130,321.00, and delivery is FOB origin. The designated shipping and parcel post address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details must align with DLAD PROC NOTES C19 and C20. Compliance with all referenced technical and quality controls, including physical identification and removal of government markings from non-accepted items, is mandatory.

General Info

361 self-locking nuts, part 5310-01-599-9093, delivered FOB origin by Jan 10, 2027, per MIL-STD-129 and DLA requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06AH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MONICA GREENE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,SELF-LOCKING,PL
NUT,SELF-LOCKING,PL
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLICK BOND INC 66530 P/N CB6009CR5-1P
THE BOEING COMPANY 88277 P/N 3D0220-5C1P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486467 0001 EA 361.000
NSN/MATERIAL:5310015999093
SPE4A6-26-T-06AH
SECTION B
PR: 7017486467 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:01/17/2027
SPE4A6-26-T-06AH NSN/Part Number: 5310-01-599-9093 Quantity: 361 EA Purchase Request: 7017486467QTY: 361 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
PIN-RIVETThe contract specifies a procurement of 14 units of a PIN-RIVET with NSN 5320-01-482-8949 and part number HLT704JJ-6-10, sourced from approved suppliers including SPS Technologies LLC, Hi-Shear Corporation, and Howmet Global Fastening Systems Inc. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required, while palletization adheres to DLA packaging guidelines. The item is classified as a critical application component, and sampling must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. All shipments must use traceable freight methods, not parcel post, and are directed to the Naval Air Warfare Center in Patuxent River, Maryland, with a required delivery date of July 6, 2026.
CCAD DETACHMENT

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract pertains to the procurement of seven flat washers with part number A-D2324-149 and NSN 5310-01-185-8598, issued under solicitation SPE4A6-26-T-05YA by the ASC Commodities Division of the Department of Defense. The delivery is scheduled within 171 days after order, and the solicitation was posted on July 14, 2026, with responses due by July 22, 2026. The item is subject to DLA Packaging Requirements for Procurement and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Strict prohibition exists against the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and equipped with a secondary containment boundary as mandated by NAVSEA 5100-003D. The supplier, Alfa Laval Inc of Warminster, PA, must comply with requirements for the removal of government identification from non-accepted supplies. The place of performance is New Cumberland, PA, and the primary point of contact is Antonia Willcox, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract specifies the procurement of 200 shear bolts, part number MS21250H06010, under the NSN 5306009291690, for delivery to DLA Distribution in Corpus Christi, Texas, with a required delivery date of September 18, 2027, and a lead time of 171 days. The item is governed by technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking compliance with MIL-STD-129, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated; attributes are assigned verification levels or AQLs as defined, and manufacturers may choose attribute or variable inspection methods. The bolt is designated a critical application item and must strictly comply with NASM21250 Revision 2 and NASM8831 Revision 5 specifications. Mercury and mercury-containing compounds are prohibited in the item, packaging, preservation, and marking, except for specified functional uses such as in batteries, fluorescent lights, sensors, or weapon systems, with portable lamps and instruments requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. Packaging and palletization adhere to DLA-specific procedures, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-05VT, with a total price of $200.00 per unit, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 1,295 units of SCREW, CAP, SOCKET HE with NSN 5305-01-592-8384 and McMaster-Carr part number 92196A327, issued under solicitation SPE4A6-26-T-06DD by the Department of Defense’s ASC Commodities Division. Delivery is required FOB origin with a strict quantity variance of plus or minus zero percent, and inspection and acceptance occur at the destination. The required delivery date is December 26, 2026, with an allowable delivery window of 171 days. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, and all markings must adhere to RQ017 for physical identification of bare items. Quality assurance follows MIL-STD-1916 or ASQ standards with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements are derived from the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The unit of issue is each (EA), with a total contract value of $1,295.00. Shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVISThe contract pertains to the procurement of 603 units of BOLT, CLEVIS with NSN 5306-00-151-0537 under solicitation SPE4A7-26-T-571C, classified as a commercial item procured under a military specification. Delivery is required within 358 days of award, with performance centered in New Cumberland, Pennsylvania. Compliance with DLA packaging, quality, and documentation requirements is mandatory, including adherence to Contract Data Requirements Lists such as DD Form 1423s and specific CDRLs addressing quality conformance, inspection at origin, removal of government identification from non-accepted supplies, and tailored higher-level quality provisions for manufacturers and non-manufacturers. All items must conform to MIL-STD-130N for identification marking, with additional requirements for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise dictated, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Threads classified as 3A and 3B must be inspected per System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specific diameters. The item is subject to fully competitive procurement under federal specifications, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details