This Solicitation opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
NUT, SELF-LOCKING, SPLIN
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of 954 self-locking spline nuts, identified by NSN 5310-01-054-0008 and part number C7592A3D1, manufactured by Lockheed Martin Corp in Fort Worth, TX. The item is classified as a commercial item, and while adequate data for competitive procurement is deemed insufficient, the procurement is governed by DLA-specific technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersedes general standards like ASTM D3951. Quality assurance is based on MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are defined with verification levels VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging and labeling must conform to MIL-STD-129 with 2D barcoding, and physical identification of the bare item is required under RQ017. The item must comply with hazardous materials labeling under 29 CFR 1910.1200 unless exempted by federal statutes, and any exempted materials must be explicitly identified by the contractor. The contract is solicited under SPE4A6-26-T-08KQ with a response deadline of August 3, 2026, and a delivery requirement of 14 days after award to the DLA Distribution facility in San Diego, CA, under FOB Destination terms. The placing agency is the ASC Commodities Division of the Defense Logistics Agency, with Charece Smith as the point of contact. Payment is to be processed via Wide Area WorkFlow (WAWF), and contract administration requires compliance with DFARS and FAR clauses including safeguarding covered contractor information systems (52.240-93), NIST SP 800-171 requirements (252.240-7997), employment eligibility verification (52.222-54), combating trafficking in persons (52.222-50), and sustainable product usage (52.223-23). All offerors must maintain a validated UEI and CAGE code and must represent their small business status and socioeconomic classifications as applicable. Subcontracting for commercial
General Info
Agency
NAICS
Place of Performance
3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
NUT,SELF-LOCKING,SPLINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
LOCKHEED MARTIN CORP (81755)
FORT WORTH,TX
P/N C7592A3D1
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
ADEQUATE DATA FOR NSN/Part Number: 5310-01-054-0008 Quantity: 954 EA Purchase Request: 7017572554QTY: 954 Delivery: 14 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS