Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NUT, SELF-LOCKING, SPLIN

Active
SPE4A6-26-T-21UXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 978 self-locking spline nuts, identified by NSN 5310-01-092-0238 and part number MS14164-06. The hardware must be manufactured in accordance with the current revision of the applicable part standards, specifically NASM14164 and NASM8922. The items are to be delivered FOB Origin to DLA Distribution San Diego, with a required delivery date of February 20, 2027, and a delivery window of 163 days. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Item Unique Identification is not required for this order, and the material has no specified shelf life. Technical and quality requirements are further detailed in the DLA Master List.

General Info

Procurement of 978 self-locking spline nuts delivered to DLA San Diego by February 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-21UX.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
NUT,SELF-LOCKING,SPLINE
NUT, SELF-LOCKING, SPLINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
TDP Rev B Gen 2
SPE4A6-26-T-21UX
SECTION B
IAW BASIC NON GOVT STD NASM14164
REVISION NR 1 DTD 02/28/2013
PART PIECE NUMBER: MS14164-06
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD NASM8922 REVISION NR 1 DTD 12/21/2012 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017916834 0001 EA 978.000
NSN/MATERIAL:5310010920238
DELIVERY (IN DAYS):0163
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
SPE4A6-26-T-21UX
SECTION B
PR: 7017916834 PRLI: 0001 CONT’D
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:02/12/2027 Original Required Delivery Date:02/20/2027
SPE4A6-26-T-21UX NSN/Part Number: 5310-01-092-0238 Quantity: 978 EA Purchase Request: 7017916834QTY: 978 Delivery: 163 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-6451
This contract is for the procurement of self-locking hexagon nuts, identified by NSN 5310-00-483-8790 and part number MS17829-6C. The total quantity requested is 28,621 units, divided across three delivery locations: DLA Distribution Depot Hill, DLA Distribution Cherry Point, and DLA Distribution New Cumberland. The items are classified as commercial and must be manufactured according to the current revision of the applicable part standards, including NASM17829 and NASM25027. Key requirements include strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging. The contract mandates a total prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Quality assurance is emphasized through the requirement of a Certificate of Quality Compliance and critical item source inspection. Delivery is specified as FOB Origin with a delivery window of 452 days, and the solicitation is designated as a HUBZone set-aside.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A7-26-T-689M
The Defense Logistics Agency of the Department of Defense has issued a solicitation for the procurement of eight machine bolts under NSN/Part Number 5306-01-622-3939. This federal requirement is identified by solicitation number SPE4A7-26-T-689M and is associated with purchase request 7017784003. The solicitation was officially posted on August 24, 2026, and the deadline for responses is set for September 1, 2026. Interested parties can find further details and submission guidelines through the provided DIBBS link.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7L4-26-U-1139
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1139 for the procurement of 16 hexagon head cap screws. The items are identified by NSN/Part Number 5305-01-613-7854 and are associated with purchase request 1000240635. This federal solicitation was posted on August 24, 2026, and requires responses to be submitted by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6432
This contract is for the procurement of 7,143 lock washers, identified by NSN 5310-01-053-0832 and part number MS51848-45. The items are classified as critical application items and must adhere to basic specification MS51848E. The agreement specifies a delivery timeline of 161 days, with a required delivery date of June 19, 2027, and a need ship date of February 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, with limited exceptions for specific functional components. The procurement is conducted under full and open competition for the Nuclear Reactor Program within the Department of Defense.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXTEN
Solicitation # SPE4A5-26-T-385H
This contract is for the procurement of 1,137 self-locking hexagon nuts with extended washers, identified by NSN 5310-01-669-3979 and Boeing part number BACN11AG3. The items are designated as critical application items and require a Certificate of Airworthiness and Conformance for FAA certified parts. Delivery is required within 165 days, with a need ship date of February 14, 2027, and shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical requirements, including supply chain traceability documentation and FAA airworthiness approval. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Item Unique Identification is not required for this procurement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-21WN
Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4453
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one machine screw under NSN 5305-26-300-5845. The contract requires delivery within five days after receipt of order, with performance taking place in Lewis McChord. The response deadline for this solicitation is September 1, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, source approval request documentation, and specific physical identification and bare item marking. While the material generally does not have a shelf life requirement, specific provisions for Type I items are noted. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, and Item Unique Identification is not required for this specific order.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7M4-26-T-364B
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 21 machine screws under NSN 5305014080413. The requirement specifies part number 1647715-8 from Mission Systems Davenport Inc. Delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List. Shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation is identified by number SPE7M4-26-T-364B and falls under NAICS code 332722.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
BACK-UP RING, PREFOR
Solicitation # SPE7L3-26-T-203E
This contract is for the procurement of 593 preformed back-up rings under solicitation SPE7L3-26-T-203E for the Department of Defense. The items must be manufactured according to the current revision of the applicable part standard, specifically referencing SAE AS8791D and MIL-STD-1330E. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to quality conformance inspection requirements, and a strict prohibition on the use of asbestos, class I ozone-depleting chemicals, and intentionally added mercury. The items must be oxygen cleaned and packaged in accordance with MIL-STD-1330 and MIL-DTL-117 to protect against ultraviolet rays using waterproof, greaseproof, opaque bags. Inspection and acceptance will occur at the origin, with delivery required within 164 days. The final shipment is destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of November 22, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-01J7
This procurement contract is for the supply of 248 threaded spacing standoffs under National Stock Number 5340-01-197-5518. The delivery timeline is set for 168 days after the order is placed. The solicitation is managed by the Department of Defense Land Supply Chain agency, with performance located in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging and quality conformance inspection requirements, including the submission of a Certificate of Quality Compliance. Contractors must comply with CMMC Level 2 certification and adhere to rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-21SV
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of four flat washers under National Stock Number 5310-01-605-2842. The contract requires delivery within 20 days after receipt of order, with the place of performance located in Pearl Harbor, Hawaii. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Furthermore, the contract involves covered defense information and is subject to export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-21SY
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of five machine bolts under National Stock Number 5306-01-569-7786. The contract requires delivery within 20 days after receipt of the order, with performance taking place in Jacksonville, Florida. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract stipulates the removal of government identification from any supplies that are not accepted. Interested parties must respond by September 1, 2026.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15WU
Solicitation SPE4A6-26-T-15WU is a procurement request by the Department of Defense, ASC Commodities Division, for 1,477 units of threaded pin-rivets (NSN 5320014527666). This is a critical application item identified as Commercial Off The Shelf (COTS), requiring a manufacturer Certificate of Compliance conforming to DI-MISC-81356 and documentation of ownership transfers to ensure traceability to the certified lot. Due to the nature of the item, casting or forging may be required, and offerors are directed to the DLA Casting and Forging Assistance Request process if tooling or material information is needed. The contract specifies a delivery window of 100 days after receipt of order, with a need ship date of November 29, 2026, and a final required delivery date of January 3, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. All payment requests and receiving reports must be submitted electronically via Wide Area WorkFlow (WAWF). The solicitation closed for responses on August 20, 2026.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-T-16DP
This contract is for the procurement of 1,152 units of Turnlock Fastener Stud Assemblies, identified by NSN 5325-01-169-5657 and Howmet Global Fastening Systems part number 26S51-22. The order is designated as a critical application item with a delivery requirement of 112 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and CMMC Level 2 self-assessment. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21SZ
This solicitation is for the procurement of 10 headless shoulder pins under contract number SPE4A6-26-T-21SZ for the Department of Defense ASC Commodities Division. The delivery requirement is 20 days after receipt of order, with the place of performance located in Keyport. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with sampling methods adhering to MIL-STD-1916 or ASQ H1331. The contract includes strict security and regulatory compliance mandates, including CMMC Level 2 certification and the protection of covered defense information. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-21UR
This contract is a solicitation for the procurement of four units of a closing assembly handle for a nose landing gear kneeling door, identified by NSN/Part Number 0001S00000052. Issued by the Department of Defense ASC Commodities Division, the contract requires delivery within 590 days after receipt of order. Performance is centered at Robins Air Force Base, and the procurement falls under NAICS code 336413. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, physical identification, and bare item marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling generally required. Additionally, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training to access technical data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-15WY
This contract, identified as SPE4A6-26-T-15WY, is for the procurement of 890 units of pin-rivet collars under NSN 5320-01-623-0156. The item is designated as a critical application item with a required delivery date of March 7, 2027, and a delivery window of 197 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, covered defense information, and configuration change management. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 334514
New
DIBBS
GAGE ROD, LIQUID LEV
Solicitation # SPE4A6-26-T-21UD
This contract is for the procurement of five liquid level gage rods, identified by NSN 6680017223486 and part number 100893 from American Metal Bearing Co. Each of the five line items consists of one unit to be delivered to different naval vessels, including the USS Chung Hoon, USS Gravely, USS Jack H. Lucas, USS Daniel Inouye, and USS Mustin. The required delivery dates range from August 4 to August 18, 2026, with a delivery timeframe of 20 days. The terms specify FOB Destination for all shipments, with inspection and acceptance also occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. All shipments must follow DLA packaging requirements and be sent via the fastest traceable means where specified.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21YC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 12 sleeve bushings under NSN 3120-01-491-2867. The contract requires delivery within 158 days after the order is placed and is categorized under NAICS code 332991. The place of performance is located in New Cumberland, Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment organizations and specific DLA packaging and marking standards. Notably, the item is subject to stringent export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data. Inspection and acceptance will occur at the origin.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-21KY
This procurement request, solicitation number SPE4A626T21KY, is issued by DLA Aviation for the acquisition of electrical contact brushes under NSN 5977015183353. The contract consists of three line items totaling 34 units, with deliveries designated for SRF and JRMC Yokosuka, USS Zumwalt DDG 1000, and USS Lyndon B. Johnson DDG 1002. All items must be delivered within five days after the order is placed. The approved source for this equipment is 0UCP5 SRP-L-11-STR. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 335999. Interested and responsible sources must submit their quotes electronically by the deadline of August 28, 2026. The solicitation is available exclusively as an RFQ via the provided electronic link, and no hard copies or separate technical drawings are available.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
BALL SET, BEARING
Solicitation # SPE4A6-26-T-21ZK
This contract is a solicitation for 105 units of a bearing ball set, identified as a commercial off the shelf critical application item with NSN 3110-01-481-9923 and RTX Corporation part number 4950825. The delivery timeline is set for 163 days after the order, with FOB, inspection, and acceptance all occurring at the origin. A primary requirement of this agreement is strict adherence to domestic sourcing restrictions. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract mandates specific packaging and preservation standards according to MIL-STD-2073-1E and MIL-DTL-197M, explicitly prohibiting the use of mercury or mercury compounds.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-21XM
This solicitation is for the procurement of 13 annular ball bearings, part number 2553379, under solicitation number SPE4A6-26-T-21XM. The requirements specify that the bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Acceptable sources include The Barden Corporation and New Hampshire Ball Bearings Inc. Technical specifications include a raceway surface finish not exceeding 2 micro-inch AA and the use of lube/oil L01 per MIL-PRF-6085D. The contract mandates strict adherence to DLA packaging, marking, and quality requirements, including MIL-STD-129 and MIL-DTL-197M. The items are subject to a 12-month extendable shelf life and require a contractor declaration regarding the domestic or foreign nature of the materials. Delivery is required within five days after order, with inspection and acceptance occurring at the destination. Cybersecurity compliance via CMMC Level 2 self-assessment and adherence to covered defense information regulations are also required.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21VJ
This contract is for the procurement of 18 sleeve bushings, identified by NSN 3120-01-354-0277 and part number 4-195-9-00215 from Grove U.S. LLC. The solicitation, numbered SPE4A6-26-T-21VJ, is issued by the Department of Defense ASC Commodities Division. Delivery is required within 165 days after order, with a need ship date of February 14, 2027, and an original required delivery date of July 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details