Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

NUT, SHEET SPRING

Active
SPE4A6-26-T-06XZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four NUT, SHEET SPRING parts with part number P-1008U and NSN 5310-01-334-9553, sourced from UNISTRUT CORP in Wayne, MI. Delivery is required within five days of award, and the solicitation number is SPE4A6-26-T-06XZ, with a response deadline of July 24, 2026. The contract falls under NAICS code 332722 and is issued by the ASC Commodities Division of the Department of Defense, with performance required at Hill AFB, Utah. Packaging must comply with DLA packaging requirements, and all non-accepted supplies must have government identification removed. Physical identification of the items must be clearly marked without government markings. Sampling shall follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise stated; critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively, with corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major. If MIL-STD-105 or ASQ Z1.4 is used for sample size determination, zero non-conformances are required for acceptance unless the contract specifies otherwise. The manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916 unless the contract dictates otherwise.

General Info

Procure four NUT, SHEET SPRING parts P-1008U from UNISTRUT CORP, deliver in five days, comply with DLA and MIL-STD-1916 sampling.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

5851 F AVE BLDG 849W, HILL AFB, UT, 84056-5713, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06XZ for DLA Aviation

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Cezanne Garris

Full Description

Show more
NUT,SHEET SPRING
NUT,SHEET SPRING
UNISTRUT CORP (96195)
WAYNE MI
P/N P-1008U
INCLUDE RA001 OBJECT TEXT ID ST LANGUAGE E
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5310-01-334-9553 Quantity: 4 EA Purchase Request: 7017476062QTY: 4 Delivery: 5 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 35 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract specifies the procurement of close-tolerance screws under NSN 5305-01-505-3998 with a quantity of 689 units, sourced from multiple approved manufacturers including Boeing, Arconic, Lisi Aerospace, SPS Technologies, and others, each identified by unique part numbers and vendor codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, superseding other standards unless explicitly overridden. Sampling must adhere to MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise contracted. Configuration changes require formal engineering change proposals or variance requests, and all items are designated as critical application components. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA’s RP001 packaging standards with palletization as specified, and unit packaging details are fixed per contract. The contract enforces a 0% variance in quantity and requires delivery FOB origin within 163 days, with inspection and acceptance occurring at the destination. The delivery address is DLA Distribution San Diego, and the required ship date is January 4, 2027, with the original delivery deadline set for January 19, 2027. Transportation logistics follow DLAD procedural notes C19 and C20, and unit of issue is each (EA) at a unit price resulting in a total price of $689.00. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026, under NAICS code 332722, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSIONThe contract is for 28 units of a spring tension washer identified by NSN 5310-00-283-0991 under solicitation SPE4A6-26-T-07AW, with a response deadline of July 24, 2026, and a delivery requirement of 213 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. The item is subject to stringent cybersecurity standards requiring CMMC Level 2 compliance, either through a self-assessment or certification by a C3PAO. Packaging must adhere to DLA standards, and inspection and acceptance must occur at the manufacturer's origin. All non-accepted supplies must have government identification removed, and the item must be physically marked as a bare part. Export control regulations under ITAR or EAR apply to associated technical data, prohibiting disclosure to foreign persons without authorization from the Department of State or Commerce. Only DLA contractors with JCP certification, completed DOD export control training, and DLA-approved access may handle the technical data. The place of performance is New Cumberland, Pennsylvania, and the contracting office is the ASC Commodities Division under the Department of Defense, with Antonia Willcox as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details